it looks like the CD audio ripping doesn't work on my via
VT82C693A/694x based motherboard, even though it works fine when I
connect cd drive to PCI ide controller.
when doing audio ripping on MB's ide there are 'lost interrupt'
messages in syslog and ripping is VERY slow (hours per song), there is
an interrupt lost every 40 - 100 ide commands (it seems the timing
doesn't matter, when I stepped through cdparanoia using debugger it was
the same as when just running cdparanoia).
internal MB's ide works fine for everything else: harddrives work OK,
data cd, cd burning all work properly. only audio ripping doesn't work
(regardless of whether I use hdc or ide-scsi)
I tried to use different CD drive, different ide cable, different ide
slot, HDs in different ide slots etc. nothing makes any difference, the
audio ripping on the internal ide doesn't work, everything else works.
any ideas what might be wrong? is it a ide driver <-> motherboard
problem?
TIA
system info:
kernel 2.4.17 and 2.4.18 (same behaviour)
MB: VIA Technologies, Inc. VT82C693A/694x (abit)
cd drive: TDK CDRW321040B, ATAPI CD/DVD-ROM drive
alternative cd drive: old mitsumi
kernel config: CONFIG_BLK_DEV_VIA82CXXX=y
dma access both on and off (same problem)
32 bit access both on and off (same problem)
jojda:/dev# lspci
00:00.0 Host bridge: VIA Technologies, Inc. VT82C693A/694x [Apollo
PRO133x] (rev c4)
00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo
MVP3/Pro133x AGP]
00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South]
(rev 40)
00:07.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 06)
00:07.4 Host bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
(rev 40)
00:09.0 SCSI storage controller: Artop Electronic Corp: Unknown device
0009 (rev 02)
00:0b.0 Ethernet controller: D-Link System Inc RTL8139 Ethernet (rev 10)
00:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139
(rev 10)
00:0f.0 VGA compatible controller: 3Dfx Interactive, Inc. Voodoo 3 (rev
01)
btw for some reason the additional ide controller is listed as SCSI
storage controller: Artop Electronic Corp in the lspci output above.
erik
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Tue Apr 30 2002 - 22:00:20 EST