Re: What to do with all of the USB UHCI drivers in the kernel?

From: Martin Dalecki (dalecki@evision-ventures.com)
Date: Thu May 23 2002 - 01:34:19 EST


Uz.ytkownik Greg KH napisa?:
> On Wed, May 22, 2002 at 03:35:48PM -0400, Andre Bonin wrote:
>
>>>This is probably because you have an OHCI hardware device, not a UHCI
>>>device. What does 'lspci -v' say for your machine?
>>
>>Sorry, i'me not too familiar with the USB architecture. Anyway here is
>>the relevant lspci entries (note: I did this under my working 2.4.18)
>>
>>02:08.0 USB Controller: NEC Corporation USB (rev 41) (prog-if 10 [OHCI])
>> Subsystem: Unknown device 807d:0035
>> Flags: bus master, medium devsel, latency 32, IRQ 19
>> Memory at cd000000 (32-bit, non-prefetchable) [size=4K]
>> Capabilities: [40] Power Management version 2
>>
>>02:08.1 USB Controller: NEC Corporation USB (rev 41) (prog-if 10 [OHCI])
>> Subsystem: Unknown device 807d:0035
>> Flags: bus master, medium devsel, latency 32, IRQ 16
>> Memory at cc800000 (32-bit, non-prefetchable) [size=4K]
>> Capabilities: [40] Power Management version 2
>>
>>02:08.2 USB Controller: NEC Corporation USB 2.0 (rev 02) (prog-if 20 [EHCI])
>> Subsystem: Unknown device 807d:1043
>> Flags: bus master, medium devsel, latency 32, IRQ 17
>> Memory at cc000000 (32-bit, non-prefetchable) [size=256]
>> Capabilities: [40] Power Management version 2
>
>
> You only have EHCI and OHCI hardware. No wonder the UHCI drivers do not
> work :)
>
>
>>>And how does 2.5.17 work for you?
>>
>>Not too good beacuse I don't have the option of enabling OHCI :) Are we
>>still keeping it?
>
>
> Yes, use the ohci-hcd driver. Also you can use the ehci-hcd driver if
> you have any USB 2.0 devices, as it looks like you have a USB 2.0
> controller.

Could you please just do me a small favour and drop something
in to linux/Documentation. Becouse I'm right now already confused
about which driver to use and which alias to put in /etc/modules.conf
so kudzu stops hollering about not knowing what to do
if I out of a sudden reboot in to 2.5.xx kernel.

Many thank's in advance.

PS. I could of course figure it out of my self, but since
I don't attach anything to USB on my box *that* frequently.

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Thu May 23 2002 - 22:00:28 EST