DFE-580tx and redhat 7.3's sundance driver does not work.

From: Ben Greear (greearb@candelatech.com)
Date: Fri May 24 2002 - 01:19:18 EST

Next message: Ravikiran G Thirumalai: "[Patch] 2.4.19-pre8 apic_timer_irqs cacheline bouncing"
Previous message: David S. Miller: "Re: Possible discrepancy regarding streaming DMA mappings in DMA-mapping.txt?"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Looks like D-Link obsoleted my trusty DFE-570tx, and replaced it
with the DFE-580tx. I got one of these cards to try out on a
new RH 7.3 (2.4.18-3) kernel. The sundance driver was chosen
by the installer.

It creates the interfaces, but they show totally bogus counters.
(there is no ethernet activity, or not supposed to be any)

MAC looks bogus too.

Any suggestions are welcome!

Thanks,
Ben

eth5 Link encap:Ethernet HWaddr 6F:EF:6F:EF:6F:EF
           UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
           RX packets:123555840 errors:0 dropped:480629 overruns:0 frame:0
           TX packets:131444993 errors:0 dropped:0 overruns:0 carrier:0
           collisions:965280 txqueuelen:100
           RX bytes:1473161754 (1404.9 Mb) TX bytes:1473622273 (1405.3 Mb)
           Interrupt:11 Base address:0x8000

[root@localhost root]# mii-tool -vv eth5
eth5: 10 Mbit, half duplex, no link
   registers for MII PHY 1:
     0000 0000 0000 0000 0000 0000 0000 0000
     0000 0000 0000 0000 0000 0000 0000 0000
     0000 0000 0000 0000 0000 0000 0000 0000
     0000 0000 0000 0000 0000 0000 0000 0000
   product info: vendor 00:00:00, model 0 rev 0
   basic mode: 10 Mbit, half duplex
   basic status: no link
   capabilities:
   advertising:

sundance.c:v1.01b 17-Jan-2002 Written by Donald Becker
http://www.scyld.com/network/sundance.html
eth5: D-Link DFE-580TX 4 port Server Adapter at 0xce8a8000, 6f:ef:6f:ef:6f:ef, IRQ 11.
eth5: No MII transceiver found!, ASIC status f000ef6f
eth6: D-Link DFE-580TX 4 port Server Adapter at 0xce8aa000, 6f:ef:6f:ef:6f:ef, IRQ 7.
eth6: No MII transceiver found!, ASIC status 7fef6f
eth7: D-Link DFE-580TX 4 port Server Adapter at 0xce8ac000, 6f:ef:6f:ef:6f:ef, IRQ 5.
eth7: No MII transceiver found!, ASIC status 7fef6f
eth8: D-Link DFE-580TX 4 port Server Adapter at 0xce8ae000, 6f:ef:6f:ef:6f:ef, IRQ 10.
eth8: No MII transceiver found!, ASIC status 7fef6f

-- Ben Greear <greearb@candelatech.com> <Ben_Greear AT excite.com> President of Candela Technologies Inc http://www.candelatech.com ScryMUD: http://scry.wanfear.com http://scry.wanfear.com/~greear

- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/

Next message: Ravikiran G Thirumalai: "[Patch] 2.4.19-pre8 apic_timer_irqs cacheline bouncing"
Previous message: David S. Miller: "Re: Possible discrepancy regarding streaming DMA mappings in DMA-mapping.txt?"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

This archive was generated by hypermail 2b29 : Fri May 31 2002 - 22:00:12 EST