You don't say which kernel you're using. I have a p71 which I can't get
to work with 2.5.18 - see the mass storage thread. OTOH, a stock rh
2.4.18 kernel works just fine.
What does usbview show? What are the usb and scsi snips from .config.
What hapens when you try to mount sd* ?
Colin Slater wrote:
> Hello,
> I just got a Sony DSC-P71 digital camera (wonderful), but it doesn't
> seem to be working in linux. I beleive it uses the usb mass storage
> driver, it seems to use an equivilent driver in windows. I have scsi,
> usb, usb mass storage modules all loaded.
> dmesg after I load the usb-storage module, and then plug the camera in:
>
> Initializing USB Mass Storage driver...
> usb.c: registered new driver usb-storage
> USB Mass Storage support registered.
> hub.c: USB new device connect on bus1/1, assigned device number 3
> scsi0 : SCSI emulation for USB Mass Storage devices
>
> I am useing devfs, and /dev/scsi is empty.
>
> cat /proc/bus/usb/devices:
> <snip>
> T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
> D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
> P: Vendor=054c ProdID=0010 Rev= 4.10
> S: Manufacturer=Sony
> S: Product=Sony DSC
> C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 2mA
> I: If#= 0 Alt= 0 #EPs= 3 Cls=08(stor.) Sub=ff Prot=01 Driver=(none)
> E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
> E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
> E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
> <snip>
>
> All this happens regardless of NVdriver being loaded or not.
>
> If someone with one of these cameras or the nearly identical DSC-P31
> could help me, it would be appreciated
>
> Colin
>
>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Fri May 31 2002 - 22:00:24 EST