Sun Jun 2 07:29:17 CEST 2002 ide-clean-81
- Don't use ata_taskfiles cmd field for drive status reporting,
we can now simply use drive->status instead.
- Unify command type parser entries which could be unified due to the
unification of corresponding interrupt handlers.
- Eliminate reading parameter from ata_do_udma(). We have this information
already in the rq. This allows us to merge several methods.
- Rename XXX_udma to udma_setup, since we have finally settled up on this
semantics.
- Simplify tons of host chip code by removing wrapper functions.
diff -urN linux-2.5.19/drivers/ide/aec62xx.c linux/drivers/ide/aec62xx.c
--- linux-2.5.19/drivers/ide/aec62xx.c 2002-06-01 18:53:06.000000000 +0200
+++ linux/drivers/ide/aec62xx.c 2002-06-02 12:24:11.000000000 +0200
@@ -150,7 +150,7 @@
}
#ifdef CONFIG_BLK_DEV_IDEDMA
-static int aec62xx_dmaproc(struct ata_device *drive)
+static int aec62xx_udma_setup(struct ata_device *drive)
{
u32 bmide = pci_resource_start(drive->channel->pci_dev, 4);
short speed;
@@ -244,8 +244,8 @@
{
int i;
- ch->tuneproc = &aec62xx_tune_drive;
- ch->speedproc = &aec_set_drive;
+ ch->tuneproc = aec62xx_tune_drive;
+ ch->speedproc = aec_set_drive;
ch->autodma = 0;
ch->io_32bit = 1;
@@ -259,7 +259,7 @@
#ifdef CONFIG_BLK_DEV_IDEDMA
if (ch->dma_base) {
ch->highmem = 1;
- ch->XXX_udma = aec62xx_dmaproc;
+ ch->udma_setup = aec62xx_udma_setup;
#ifdef CONFIG_IDEDMA_AUTO
if (!noautodma)
ch->autodma = 1;
diff -urN linux-2.5.19/drivers/ide/alim15x3.c linux/drivers/ide/alim15x3.c
--- linux-2.5.19/drivers/ide/alim15x3.c 2002-06-01 18:53:01.000000000 +0200
+++ linux/drivers/ide/alim15x3.c 2002-06-02 12:05:13.000000000 +0200
@@ -199,7 +199,7 @@
return !ali15x3_tune_chipset(drive, mode);
}
-static int ali15x3_config_drive_for_dma(struct ata_device *drive)
+static int ali15x3_udma_setup(struct ata_device *drive)
{
struct hd_driveid *id = drive->id;
struct ata_channel *hwif = drive->channel;
@@ -261,17 +261,12 @@
return 0;
}
-static int ali15x3_udma_write(struct ata_device *drive, struct request *rq)
+static int ali15x3_udma_init(struct ata_device *drive, struct request *rq)
{
if ((m5229_revision < 0xC2) && (drive->type != ATA_DISK))
return 1; /* try PIO instead of DMA */
- return ata_do_udma(0, drive, rq);
-}
-
-static int ali15x3_dmaproc(struct ata_device *drive)
-{
- return ali15x3_config_drive_for_dma(drive);
+ return udma_pci_init(drive, rq);
}
#endif
@@ -447,8 +442,8 @@
/*
* M1543C or newer for DMAing
*/
- hwif->udma_write = ali15x3_udma_write;
- hwif->XXX_udma = ali15x3_dmaproc;
+ hwif->udma_init = ali15x3_udma_init;
+ hwif->udma_setup = ali15x3_udma_setup;
hwif->autodma = 1;
}
diff -urN linux-2.5.19/drivers/ide/amd74xx.c linux/drivers/ide/amd74xx.c
--- linux-2.5.19/drivers/ide/amd74xx.c 2002-06-01 18:53:01.000000000 +0200
+++ linux/drivers/ide/amd74xx.c 2002-06-02 11:46:59.000000000 +0200
@@ -177,7 +177,7 @@
}
#ifdef CONFIG_BLK_DEV_IDEDMA
-int amd74xx_dmaproc(struct ata_device *drive)
+static int amd74xx_udma_setup(struct ata_device *drive)
{
short w80 = drive->channel->udma_four;
@@ -291,7 +291,7 @@
#ifdef CONFIG_BLK_DEV_IDEDMA
if (hwif->dma_base) {
hwif->highmem = 1;
- hwif->XXX_udma = amd74xx_dmaproc;
+ hwif->udma_setup = amd74xx_udma_setup;
# ifdef CONFIG_IDEDMA_AUTO
if (!noautodma)
hwif->autodma = 1;
diff -urN linux-2.5.19/drivers/ide/cmd64x.c linux/drivers/ide/cmd64x.c
--- linux-2.5.19/drivers/ide/cmd64x.c 2002-06-01 18:53:02.000000000 +0200
+++ linux/drivers/ide/cmd64x.c 2002-06-02 11:45:19.000000000 +0200
@@ -627,7 +627,7 @@
return 0;
}
-static int cmd680_dmaproc(struct ata_device *drive)
+static int cmd680_udma_setup(struct ata_device *drive)
{
return cmd64x_config_drive_for_dma(drive);
}
@@ -680,7 +680,7 @@
return (dma_stat & 4) == 4; /* return 1 if INTR asserted */
}
-static int cmd64x_dmaproc(struct ata_device *drive)
+static int cmd64x_udma_setup(struct ata_device *drive)
{
return cmd64x_config_drive_for_dma(drive);
}
@@ -703,7 +703,7 @@
* ASUS P55T2P4D with CMD646 chipset revision 0x01 requires the old
* event order for DMA transfers.
*/
-static int cmd646_1_dmaproc(struct ata_device *drive)
+static int cmd646_1_udma_setup(struct ata_device *drive)
{
return cmd64x_config_drive_for_dma(drive);
}
@@ -903,7 +903,7 @@
hwif->busproc = cmd680_busproc;
#ifdef CONFIG_BLK_DEV_IDEDMA
if (hwif->dma_base)
- hwif->XXX_udma = cmd680_dmaproc;
+ hwif->udma_setup = cmd680_udma_setup;
#endif
hwif->resetproc = cmd680_reset;
hwif->speedproc = cmd680_tune_chipset;
@@ -914,7 +914,7 @@
case PCI_DEVICE_ID_CMD_643:
#ifdef CONFIG_BLK_DEV_IDEDMA
if (hwif->dma_base) {
- hwif->XXX_udma = cmd64x_dmaproc;
+ hwif->udma_setup = cmd64x_udma_setup;
hwif->udma_stop = cmd64x_udma_stop;
hwif->udma_irq_status = cmd64x_udma_irq_status;
}
@@ -927,10 +927,10 @@
#ifdef CONFIG_BLK_DEV_IDEDMA
if (hwif->dma_base) {
if (class_rev == 0x01) {
- hwif->XXX_udma = cmd646_1_dmaproc;
+ hwif->udma_setup = cmd646_1_udma_setup;
hwif->udma_stop = cmd646_1_udma_stop;
} else {
- hwif->XXX_udma = cmd64x_dmaproc;
+ hwif->udma_setup = cmd64x_udma_setup;
hwif->udma_stop = cmd64x_udma_stop;
hwif->udma_irq_status = cmd64x_udma_irq_status;
}
diff -urN linux-2.5.19/drivers/ide/cs5530.c linux/drivers/ide/cs5530.c
--- linux-2.5.19/drivers/ide/cs5530.c 2002-06-01 18:53:02.000000000 +0200
+++ linux/drivers/ide/cs5530.c 2002-06-02 11:47:25.000000000 +0200
@@ -191,7 +191,7 @@
return 0;
}
-int cs5530_dmaproc(struct ata_device *drive)
+static int cs5530_udma_setup(struct ata_device *drive)
{
return cs5530_config_dma(drive);
}
@@ -292,7 +292,7 @@
unsigned int basereg, d0_timings;
#ifdef CONFIG_BLK_DEV_IDEDMA
- hwif->XXX_udma = cs5530_dmaproc;
+ hwif->udma_setup = cs5530_udma_setup;
hwif->highmem = 1;
#else
hwif->autodma = 0;
diff -urN linux-2.5.19/drivers/ide/cy82c693.c linux/drivers/ide/cy82c693.c
--- linux-2.5.19/drivers/ide/cy82c693.c 2002-05-29 20:42:49.000000000 +0200
+++ linux/drivers/ide/cy82c693.c 2002-06-02 11:40:41.000000000 +0200
@@ -236,7 +236,7 @@
/*
* used to set DMA mode for CY82C693 (single and multi modes)
*/
-static int cy82c693_dmaproc(struct ata_device *drive)
+static int cy82c693_udma_setup(struct ata_device *drive)
{
/*
* Set dma mode for drive everything else is done by the defaul func.
@@ -443,7 +443,7 @@
#ifdef CONFIG_BLK_DEV_IDEDMA
if (hwif->dma_base) {
hwif->highmem = 1;
- hwif->XXX_udma = cy82c693_dmaproc;
+ hwif->udma_setup = cy82c693_udma_setup;
if (!noautodma)
hwif->autodma = 1;
}
diff -urN linux-2.5.19/drivers/ide/hpt34x.c linux/drivers/ide/hpt34x.c
--- linux-2.5.19/drivers/ide/hpt34x.c 2002-06-01 23:17:28.000000000 +0200
+++ linux/drivers/ide/hpt34x.c 2002-06-02 11:55:16.000000000 +0200
@@ -172,7 +172,7 @@
return !hpt34x_tune_chipset(drive, mode);
}
-static int config_drive_xfer_rate(struct ata_device *drive)
+static int hpt34x_udma_setup(struct ata_device *drive)
{
struct hd_driveid *id = drive->id;
int on = 1;
@@ -246,18 +246,23 @@
return (dma_stat & 7) != 4; /* verify good DMA status */
}
-static int do_udma(unsigned int reading, struct ata_device *drive, struct request *rq)
+static int hpt34x_udma_init(struct ata_device *drive, struct request *rq)
{
struct ata_channel *ch = drive->channel;
unsigned long dma_base = ch->dma_base;
unsigned int count;
+ u8 cmd;
if (!(count = udma_new_table(ch, rq)))
return 1; /* try PIO instead of DMA */
- outl(ch->dmatable_dma, dma_base + 4); /* PRD table */
- reading |= 0x01;
- outb(reading, dma_base); /* specify r/w */
+ if (rq_data_dir(rq) == READ)
+ cmd = 0x09;
+ else
+ cmd = 0x01;
+
+ outl(ch->dmatable_dma, dma_base + 4); /* PRD table */
+ outb(cmd, dma_base); /* specify r/w */
outb(inb(dma_base+2)|6, dma_base+2); /* clear INTR & ERROR flags */
drive->waiting_for_dma = 1;
@@ -265,30 +270,10 @@
return 0;
ide_set_handler(drive, ide_dma_intr, WAIT_CMD, NULL); /* issue cmd to drive */
- OUT_BYTE((reading == 9) ? WIN_READDMA : WIN_WRITEDMA, IDE_COMMAND_REG);
+ OUT_BYTE((cmd == 0x09) ? WIN_READDMA : WIN_WRITEDMA, IDE_COMMAND_REG);
return 0;
}
-
-static int hpt34x_udma_read(struct ata_device *drive, struct request *rq)
-{
- return do_udma(1 << 3, drive, rq);
-}
-
-static int hpt34x_udma_write(struct ata_device *drive, struct request *rq)
-{
- return do_udma(0, drive, rq);
-}
-
-/*
- * This is specific to the HPT343 UDMA bios-less chipset
- * and HPT345 UDMA bios chipset (stamped HPT363)
- * by HighPoint|Triones Technologies, Inc.
- */
-static int hpt34x_dmaproc(struct ata_device *drive)
-{
- return config_drive_xfer_rate(drive);
-}
#endif
/*
@@ -356,9 +341,8 @@
hwif->autodma = 0;
hwif->udma_stop = hpt34x_udma_stop;
- hwif->udma_read = hpt34x_udma_read;
- hwif->udma_write = hpt34x_udma_write;
- hwif->XXX_udma = hpt34x_dmaproc;
+ hwif->udma_init = hpt34x_udma_init;
+ hwif->udma_setup = hpt34x_udma_setup;
hwif->highmem = 1;
} else {
hwif->drives[0].autotune = 1;
diff -urN linux-2.5.19/drivers/ide/hpt366.c linux/drivers/ide/hpt366.c
--- linux-2.5.19/drivers/ide/hpt366.c 2002-06-01 23:17:28.000000000 +0200
+++ linux/drivers/ide/hpt366.c 2002-06-02 12:13:53.000000000 +0200
@@ -836,7 +836,7 @@
}
}
-static int config_drive_xfer_rate(struct ata_device *drive)
+static int hpt3xx_udma_setup(struct ata_device *drive)
{
struct hd_driveid *id = drive->id;
int on = 1;
@@ -903,15 +903,6 @@
pci_write_config_byte(drive->channel->pci_dev, 0x5a, reg5ah & ~0x10);
}
-/*
- * This is specific to the HPT366 UDMA bios chipset
- * by HighPoint|Triones Technologies, Inc.
- */
-static int hpt366_dmaproc(struct ata_device *drive)
-{
- return config_drive_xfer_rate(drive);
-}
-
static void do_udma_start(struct ata_device *drive)
{
struct ata_channel *ch = drive->channel;
@@ -992,11 +983,6 @@
return (dma_stat & 7) != 4 ? (0x10 | dma_stat) : 0; /* verify good DMA status */
}
-static int hpt370_dmaproc(struct ata_device *drive)
-{
- return config_drive_xfer_rate(drive);
-}
-
static int hpt374_udma_stop(struct ata_device *drive)
{
struct ata_channel *ch = drive->channel;
@@ -1019,11 +1005,6 @@
return (dma_stat & 7) != 4 ? (0x10 | dma_stat) : 0; /* verify good DMA status */
}
-
-static int hpt374_dmaproc(struct ata_device *drive)
-{
- return config_drive_xfer_rate(drive);
-}
#endif
/*
@@ -1364,27 +1345,27 @@
if (hpt_min_rev(dev, 7)) {
ch->udma_stop = hpt374_udma_stop;
- ch->XXX_udma = hpt374_dmaproc;
+ ch->udma_setup = hpt3xx_udma_setup;
} else if (hpt_min_rev(dev, 5)) {
ch->udma_stop = hpt374_udma_stop;
- ch->XXX_udma = hpt374_dmaproc;
+ ch->udma_setup = hpt3xx_udma_setup;
} else if (hpt_min_rev(dev, 3)) {
ch->udma_start = hpt370_udma_start;
ch->udma_stop = hpt370_udma_stop;
ch->udma_timeout = hpt370_udma_timeout;
ch->udma_irq_lost = hpt370_udma_irq_lost;
- ch->XXX_udma = hpt370_dmaproc;
+ ch->udma_setup = hpt3xx_udma_setup;
}
} else if (hpt_min_rev(dev, 2)) {
ch->udma_irq_lost = hpt366_udma_irq_lost;
// ch->resetproc = hpt3xx_reset;
// ch->busproc = hpt3xx_tristate;
- ch->XXX_udma = hpt366_dmaproc;
+ ch->udma_setup = hpt3xx_udma_setup;
} else {
ch->udma_irq_lost = hpt366_udma_irq_lost;
// ch->resetproc = hpt3xx_reset;
// ch->busproc = hpt3xx_tristate;
- ch->XXX_udma = hpt366_dmaproc;
+ ch->udma_setup = hpt3xx_udma_setup;
}
if (!noautodma)
ch->autodma = 1;
diff -urN linux-2.5.19/drivers/ide/icside.c linux/drivers/ide/icside.c
--- linux-2.5.19/drivers/ide/icside.c 2002-06-01 23:17:28.000000000 +0200
+++ linux/drivers/ide/icside.c 2002-06-02 11:54:10.000000000 +0200
@@ -544,7 +544,7 @@
return 0;
}
-static int icside_dma_write(struct ata_device *drive, struct request *rq)
+static int icside_dma_init(struct ata_device *drive, struct request *rq)
{
struct ata_channel *ch = drive->channel;
unsigned int cmd;
@@ -612,12 +612,11 @@
ch->dmatable_cpu = NULL;
ch->dmatable_dma = 0;
ch->speedproc = icside_set_speed;
- ch->XXX_udma = icside_dma_check;
+ ch->udma_setup = icside_dma_check;
ch->udma_enable = icside_dma_enable;
ch->udma_start = icside_dma_start;
ch->udma_stop = icside_dma_stop;
- ch->udma_read = icside_dma_read;
- ch->udma_write = icside_dma_write;
+ ch->udma_init = icside_dma_init;
ch->udma_irq_status = icside_irq_status;
ch->udma_timeout = icside_dma_timeout;
ch->udma_irq_lost = icside_irq_lost;
diff -urN linux-2.5.19/drivers/ide/ide.c linux/drivers/ide/ide.c
--- linux-2.5.19/drivers/ide/ide.c 2002-06-02 09:41:16.000000000 +0200
+++ linux/drivers/ide/ide.c 2002-06-02 12:32:10.000000000 +0200
@@ -184,31 +184,6 @@
spin_unlock_irqrestore(ch->lock, flags);
}
-static u8 auto_reduce_xfer(struct ata_device *drive)
-{
- if (!drive->crc_count)
- return drive->current_speed;
- drive->crc_count = 0;
-
- switch(drive->current_speed) {
- case XFER_UDMA_7: return XFER_UDMA_6;
- case XFER_UDMA_6: return XFER_UDMA_5;
- case XFER_UDMA_5: return XFER_UDMA_4;
- case XFER_UDMA_4: return XFER_UDMA_3;
- case XFER_UDMA_3: return XFER_UDMA_2;
- case XFER_UDMA_2: return XFER_UDMA_1;
- case XFER_UDMA_1: return XFER_UDMA_0;
- /*
- * OOPS we do not goto non Ultra DMA modes
- * without iCRC's available we force
- * the system to PIO and make the user
- * invoke the ATA-1 ATA-2 DMA modes.
- */
- case XFER_UDMA_0:
- default: return XFER_PIO_4;
- }
-}
-
static void check_crc_errors(struct ata_device *drive)
{
if (!drive->using_dma)
@@ -218,7 +193,34 @@
if (drive->crc_count) {
udma_enable(drive, 0, 0);
if (drive->channel->speedproc) {
- u8 pio = auto_reduce_xfer(drive);
+ u8 pio = XFER_PIO_4;
+ drive->crc_count = 0;
+
+ switch (drive->current_speed) {
+ case XFER_UDMA_7: pio = XFER_UDMA_6;
+ break;
+ case XFER_UDMA_6: pio = XFER_UDMA_5;
+ break;
+ case XFER_UDMA_5: pio = XFER_UDMA_4;
+ break;
+ case XFER_UDMA_4: pio = XFER_UDMA_3;
+ break;
+ case XFER_UDMA_3: pio = XFER_UDMA_2;
+ break;
+ case XFER_UDMA_2: pio = XFER_UDMA_1;
+ break;
+ case XFER_UDMA_1: pio = XFER_UDMA_0;
+ break;
+ /*
+ * OOPS we do not goto non Ultra DMA modes
+ * without iCRC's available we force
+ * the system to PIO and make the user
+ * invoke the ATA-1 ATA-2 DMA modes.
+ */
+ case XFER_UDMA_0:
+ default:
+ pio = XFER_PIO_4;
+ }
drive->channel->speedproc(drive, pio);
}
if (drive->current_speed >= XFER_SW_DMA_0)
@@ -408,7 +410,6 @@
ar->taskfile.low_cylinder = IN_BYTE(IDE_LCYL_REG);
ar->taskfile.high_cylinder = IN_BYTE(IDE_HCYL_REG);
ar->taskfile.device_head = IN_BYTE(IDE_SELECT_REG);
- ar->cmd = drive->status;
if ((drive->id->command_set_2 & 0x0400) &&
(drive->id->cfs_enable_2 & 0x0400) &&
(drive->addressing == 1)) {
diff -urN linux-2.5.19/drivers/ide/ide-cd.c linux/drivers/ide/ide-cd.c
--- linux-2.5.19/drivers/ide/ide-cd.c 2002-06-02 07:28:28.000000000 +0200
+++ linux/drivers/ide/ide-cd.c 2002-06-02 11:59:16.000000000 +0200
@@ -736,10 +736,8 @@
return startstop;
if (info->dma) {
- if (info->cmd == READ)
- info->dma = !udma_read(drive, rq);
- else if (info->cmd == WRITE)
- info->dma = !udma_write(drive, rq);
+ if (info->cmd == READ || info->cmd == WRITE)
+ info->dma = !udma_init(drive, rq);
else
printk("ide-cd: DMA set, but not allowed\n");
}
diff -urN linux-2.5.19/drivers/ide/ide-disk.c linux/drivers/ide/ide-disk.c
--- linux-2.5.19/drivers/ide/ide-disk.c 2002-06-02 09:41:16.000000000 +0200
+++ linux/drivers/ide/ide-disk.c 2002-06-02 11:34:39.000000000 +0200
@@ -517,7 +517,7 @@
if (!drive->driver)
return -EPERM;
- if (!drive->channel->XXX_udma)
+ if (!drive->channel->udma_setup)
return -EPERM;
if (arg == drive->queue_depth && drive->using_tcq)
@@ -629,7 +629,7 @@
ide_raw_taskfile(drive, &args);
/* if OK, compute maximum address value */
- if ((args.cmd & 0x01) == 0) {
+ if (!(drive->status & ERR_STAT)) {
addr = ((args.taskfile.device_head & 0x0f) << 24)
| (args.taskfile.high_cylinder << 16)
| (args.taskfile.low_cylinder << 8)
@@ -657,7 +657,7 @@
ide_raw_taskfile(drive, &args);
/* if OK, compute maximum address value */
- if ((args.cmd & 0x01) == 0) {
+ if (!(drive->status & ERR_STAT)) {
u32 high = (args.hobfile.high_cylinder << 16) |
(args.hobfile.low_cylinder << 8) |
args.hobfile.sector_number;
@@ -696,7 +696,7 @@
/* submit command request */
ide_raw_taskfile(drive, &args);
/* if OK, read new maximum address value */
- if ((args.cmd & 0x01) == 0) {
+ if (!(drive->status & ERR_STAT)) {
addr_set = ((args.taskfile.device_head & 0x0f) << 24)
| (args.taskfile.high_cylinder << 16)
| (args.taskfile.low_cylinder << 8)
@@ -731,7 +731,7 @@
/* submit command request */
ide_raw_taskfile(drive, &args);
/* if OK, compute maximum address value */
- if ((args.cmd & 0x01) == 0) {
+ if (!(drive->status & ERR_STAT)) {
u32 high = (args.hobfile.high_cylinder << 16) |
(args.hobfile.low_cylinder << 8) |
args.hobfile.sector_number;
diff -urN linux-2.5.19/drivers/ide/ide-floppy.c linux/drivers/ide/ide-floppy.c
--- linux-2.5.19/drivers/ide/ide-floppy.c 2002-06-02 09:41:16.000000000 +0200
+++ linux/drivers/ide/ide-floppy.c 2002-06-02 11:56:51.000000000 +0200
@@ -1060,12 +1060,8 @@
if (test_and_clear_bit (PC_DMA_ERROR, &pc->flags))
udma_enable(drive, 0, 1);
- if (test_bit (PC_DMA_RECOMMENDED, &pc->flags) && drive->using_dma) {
- if (test_bit (PC_WRITING, &pc->flags))
- dma_ok = !udma_write(drive, rq);
- else
- dma_ok = !udma_read(drive, rq);
- }
+ if (test_bit (PC_DMA_RECOMMENDED, &pc->flags) && drive->using_dma)
+ dma_ok = !udma_init(drive, rq);
#endif
ata_irq_enable(drive, 1);
diff -urN linux-2.5.19/drivers/ide/ide-pmac.c linux/drivers/ide/ide-pmac.c
--- linux-2.5.19/drivers/ide/ide-pmac.c 2002-06-01 23:17:28.000000000 +0200
+++ linux/drivers/ide/ide-pmac.c 2002-06-02 12:02:01.000000000 +0200
@@ -260,11 +260,9 @@
static void pmac_udma_enable(struct ata_device *drive, int on, int verbose);
static int pmac_udma_start(struct ata_device *drive, struct request *rq);
static int pmac_udma_stop(struct ata_device *drive);
-static int pmac_do_udma(unsigned int reading, struct ata_device *drive, struct request *rq);
-static int pmac_udma_read(struct ata_device *drive, struct request *rq);
-static int pmac_udma_write(struct ata_device *drive, struct request *rq);
+static int pmac_udma_init(struct ata_device *drive, struct request *rq);
static int pmac_udma_irq_status(struct ata_device *drive);
-static int pmac_ide_dmaproc(struct ata_device *drive);
+static int pmac_udma_setup(struct ata_device *drive);
static int pmac_ide_build_dmatable(struct ata_device *drive, struct request *rq, int ix, int wr);
static int pmac_ide_tune_chipset(struct ata_device *drive, byte speed);
static void pmac_ide_tuneproc(struct ata_device *drive, byte pio);
@@ -334,10 +332,9 @@
ide_hwifs[ix].udma_enable = pmac_udma_enable;
ide_hwifs[ix].udma_start = pmac_udma_start;
ide_hwifs[ix].udma_stop = pmac_udma_stop;
- ide_hwifs[ix].udma_read = pmac_udma_read;
- ide_hwifs[ix].udma_write = pmac_udma_write;
+ ide_hwifs[ix].udma_init = pmac_udma_init;
ide_hwifs[ix].udma_irq_status = pmac_udma_irq_status;
- ide_hwifs[ix].XXX_udma = pmac_ide_dmaproc;
+ ide_hwifs[ix].udma_setup = pmac_udma_setup;
#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC_AUTO
if (!noautodma)
ide_hwifs[ix].autodma = 1;
@@ -1043,10 +1040,9 @@
ide_hwifs[ix].udma_enable = pmac_udma_enable;
ide_hwifs[ix].udma_start = pmac_udma_start;
ide_hwifs[ix].udma_stop = pmac_udma_stop;
- ide_hwifs[ix].udma_read = pmac_udma_read;
- ide_hwifs[ix].udma_write = pmac_udma_write;
+ ide_hwifs[ix].udma_init = pmac_udma_init;
ide_hwifs[ix].udma_irq_status = pmac_udma_irq_status;
- ide_hwifs[ix].XXX_udma = pmac_ide_dmaproc;
+ ide_hwifs[ix].udma_setup = pmac_udma_setup;
#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC_AUTO
if (!noautodma)
ide_hwifs[ix].autodma = 1;
@@ -1405,11 +1401,12 @@
return (dstat & (RUN|DEAD|ACTIVE)) != RUN;
}
-static int pmac_do_udma(unsigned int reading, struct ata_device *drive, struct request *rq)
+static int pmac_udma_init(struct ata_device *drive, struct request *rq)
{
int ix, ata4;
volatile struct dbdma_regs *dma;
- byte unit = (drive->select.b.unit & 0x01);
+ u8 unit = (drive->select.b.unit & 0x01);
+ int reading;
/* Can we stuff a pointer to our intf structure in config_data
* or select_data in hwif ?
@@ -1417,6 +1414,12 @@
ix = pmac_ide_find(drive);
if (ix < 0)
return 0;
+
+ if (rq_data_dir(rq) == READ)
+ reading = 1;
+ else
+ reading = 0;
+
dma = pmac_ide[ix].dma_regs;
ata4 = (pmac_ide[ix].kind == controller_kl_ata4 ||
pmac_ide[ix].kind == controller_kl_ata4_80);
@@ -1447,16 +1450,6 @@
return udma_start(drive, rq);
}
-static int pmac_udma_read(struct ata_device *drive, struct request *rq)
-{
- return pmac_do_udma(1, drive, rq);
-}
-
-static int pmac_udma_write(struct ata_device *drive, struct request *rq)
-{
- return pmac_do_udma(0, drive, rq);
-}
-
/*
* FIXME: This should be attached to a channel as we can see now!
*/
@@ -1514,7 +1507,7 @@
return 0;
}
-static int pmac_ide_dmaproc(struct ata_device *drive)
+static int pmac_udma_setup(struct ata_device *drive)
{
/* Change this to better match ide-dma.c */
pmac_ide_check_dma(drive);
diff -urN linux-2.5.19/drivers/ide/ide-tape.c linux/drivers/ide/ide-tape.c
--- linux-2.5.19/drivers/ide/ide-tape.c 2002-06-02 09:41:16.000000000 +0200
+++ linux/drivers/ide/ide-tape.c 2002-06-02 11:55:34.000000000 +0200
@@ -2258,12 +2258,8 @@
printk (KERN_WARNING "ide-tape: DMA disabled, reverting to PIO\n");
udma_enable(drive, 0, 1);
}
- if (test_bit (PC_DMA_RECOMMENDED, &pc->flags) && drive->using_dma) {
- if (test_bit (PC_WRITING, &pc->flags))
- dma_ok = !udma_write(drive, rq);
- else
- dma_ok = !udma_read(drive, rq);
- }
+ if (test_bit (PC_DMA_RECOMMENDED, &pc->flags) && drive->using_dma)
+ dma_ok = !udma_init(drive, rq);
#endif
ata_irq_enable(drive, 1);
diff -urN linux-2.5.19/drivers/ide/ide-taskfile.c linux/drivers/ide/ide-taskfile.c
--- linux-2.5.19/drivers/ide/ide-taskfile.c 2002-06-02 09:41:16.000000000 +0200
+++ linux/drivers/ide/ide-taskfile.c 2002-06-02 11:59:28.000000000 +0200
@@ -350,19 +350,19 @@
return ar->prehandler(drive, rq);
} else {
/*
- * FIXME: this is a gross hack, need to unify tcq dma proc and
- * regular dma proc.
+ * FIXME: This is a gross hack, need to unify tcq dma proc and
+ * regular dma proc. It should now be easier.
*/
if (!drive->using_dma)
return ide_started;
/* for dma commands we don't set the handler */
- if (ar->cmd == WIN_WRITEDMA || ar->cmd == WIN_WRITEDMA_EXT)
- return !udma_write(drive, rq);
- else if (ar->cmd == WIN_READDMA
+ if (ar->cmd == WIN_WRITEDMA
+ || ar->cmd == WIN_WRITEDMA_EXT
+ || ar->cmd == WIN_READDMA
|| ar->cmd == WIN_READDMA_EXT)
- return !udma_read(drive, rq);
+ return !udma_init(drive, rq);
#ifdef CONFIG_BLK_DEV_IDE_TCQ
else if (ar->cmd == WIN_WRITEDMA_QUEUED
|| ar->cmd == WIN_WRITEDMA_QUEUED_EXT
@@ -371,7 +371,7 @@
return udma_tcq_taskfile(drive, rq);
#endif
else {
- printk("ata_taskfile: unknown command %x\n", ar->cmd);
+ printk(KERN_ERR "%s: unknown command %x\n", __FUNCTION__, ar->cmd);
return ide_stopped;
}
}
@@ -556,31 +556,28 @@
* more data left
*/
ide_set_handler(drive, task_mulin_intr, WAIT_CMD, NULL);
+
return ide_started;
}
/* Called to figure out the type of command being called.
*/
-void ide_cmd_type_parser(struct ata_taskfile *args)
+void ide_cmd_type_parser(struct ata_taskfile *ar)
{
- struct hd_drive_task_hdr *taskfile = &args->taskfile;
+ struct hd_drive_task_hdr *taskfile = &ar->taskfile;
- args->prehandler = NULL;
- args->handler = NULL;
+ ar->prehandler = NULL;
+ ar->handler = NULL;
- switch (args->cmd) {
+ switch (ar->cmd) {
case WIN_IDENTIFY:
case WIN_PIDENTIFY:
- args->handler = task_in_intr;
- args->command_type = IDE_DRIVE_TASK_IN;
- return;
-
case CFA_TRANSLATE_SECTOR:
case WIN_READ:
case WIN_READ_EXT:
case WIN_READ_BUFFER:
- args->handler = task_in_intr;
- args->command_type = IDE_DRIVE_TASK_IN;
+ ar->handler = task_in_intr;
+ ar->command_type = IDE_DRIVE_TASK_IN;
return;
case CFA_WRITE_SECT_WO_ERASE:
@@ -589,56 +586,56 @@
case WIN_WRITE_VERIFY:
case WIN_WRITE_BUFFER:
case WIN_DOWNLOAD_MICROCODE:
- args->prehandler = pre_task_out_intr;
- args->handler = task_out_intr;
- args->command_type = IDE_DRIVE_TASK_RAW_WRITE;
+ ar->prehandler = pre_task_out_intr;
+ ar->handler = task_out_intr;
+ ar->command_type = IDE_DRIVE_TASK_RAW_WRITE;
return;
case WIN_MULTREAD:
case WIN_MULTREAD_EXT:
- args->handler = task_mulin_intr;
- args->command_type = IDE_DRIVE_TASK_IN;
+ ar->handler = task_mulin_intr;
+ ar->command_type = IDE_DRIVE_TASK_IN;
return;
case CFA_WRITE_MULTI_WO_ERASE:
case WIN_MULTWRITE:
case WIN_MULTWRITE_EXT:
- args->prehandler = pre_task_mulout_intr;
- args->handler = task_mulout_intr;
- args->command_type = IDE_DRIVE_TASK_RAW_WRITE;
+ ar->prehandler = pre_task_mulout_intr;
+ ar->handler = task_mulout_intr;
+ ar->command_type = IDE_DRIVE_TASK_RAW_WRITE;
return;
case WIN_SECURITY_DISABLE:
case WIN_SECURITY_ERASE_UNIT:
case WIN_SECURITY_SET_PASS:
case WIN_SECURITY_UNLOCK:
- args->handler = task_out_intr;
- args->command_type = IDE_DRIVE_TASK_OUT;
+ ar->handler = task_out_intr;
+ ar->command_type = IDE_DRIVE_TASK_OUT;
return;
case WIN_SMART:
if (taskfile->feature == SMART_WRITE_LOG_SECTOR)
- args->prehandler = pre_task_out_intr;
+ ar->prehandler = pre_task_out_intr;
- args->taskfile.low_cylinder = SMART_LCYL_PASS;
- args->taskfile.high_cylinder = SMART_HCYL_PASS;
+ ar->taskfile.low_cylinder = SMART_LCYL_PASS;
+ ar->taskfile.high_cylinder = SMART_HCYL_PASS;
- switch(args->taskfile.feature) {
+ switch(ar->taskfile.feature) {
case SMART_READ_VALUES:
case SMART_READ_THRESHOLDS:
case SMART_READ_LOG_SECTOR:
- args->handler = task_in_intr;
- args->command_type = IDE_DRIVE_TASK_IN;
+ ar->handler = task_in_intr;
+ ar->command_type = IDE_DRIVE_TASK_IN;
return;
case SMART_WRITE_LOG_SECTOR:
- args->handler = task_out_intr;
- args->command_type = IDE_DRIVE_TASK_OUT;
+ ar->handler = task_out_intr;
+ ar->command_type = IDE_DRIVE_TASK_OUT;
return;
default:
- args->handler = task_no_data_intr;
- args->command_type = IDE_DRIVE_TASK_NO_DATA;
+ ar->handler = task_no_data_intr;
+ ar->command_type = IDE_DRIVE_TASK_NO_DATA;
return;
}
@@ -648,22 +645,22 @@
case WIN_READDMA_QUEUED:
case WIN_READDMA_EXT:
case WIN_READDMA_QUEUED_EXT:
- args->command_type = IDE_DRIVE_TASK_IN;
+ ar->command_type = IDE_DRIVE_TASK_IN;
return;
case WIN_WRITEDMA:
case WIN_WRITEDMA_QUEUED:
case WIN_WRITEDMA_EXT:
case WIN_WRITEDMA_QUEUED_EXT:
- args->command_type = IDE_DRIVE_TASK_RAW_WRITE;
+ ar->command_type = IDE_DRIVE_TASK_RAW_WRITE;
return;
#endif
case WIN_SETFEATURES:
- args->handler = task_no_data_intr;
- switch(args->taskfile.feature) {
+ ar->handler = task_no_data_intr;
+ switch (ar->taskfile.feature) {
case SETFEATURES_XFER:
- args->command_type = IDE_DRIVE_TASK_SET_XFER;
+ ar->command_type = IDE_DRIVE_TASK_SET_XFER;
return;
case SETFEATURES_DIS_DEFECT:
case SETFEATURES_EN_APM:
@@ -681,18 +678,18 @@
case SETFEATURES_DIS_RI:
case SETFEATURES_DIS_SI:
default:
- args->command_type = IDE_DRIVE_TASK_NO_DATA;
+ ar->command_type = IDE_DRIVE_TASK_NO_DATA;
return;
}
case WIN_SPECIFY:
- args->handler = task_no_data_intr;
- args->command_type = IDE_DRIVE_TASK_NO_DATA;
+ ar->handler = task_no_data_intr;
+ ar->command_type = IDE_DRIVE_TASK_NO_DATA;
return;
case WIN_RESTORE:
- args->handler = recal_intr;
- args->command_type = IDE_DRIVE_TASK_NO_DATA;
+ ar->handler = recal_intr;
+ ar->command_type = IDE_DRIVE_TASK_NO_DATA;
return;
case WIN_DIAGNOSE:
@@ -722,19 +719,10 @@
case WIN_DOORUNLOCK:
case DISABLE_SEAGATE:
case EXABYTE_ENABLE_NEST:
-
- args->handler = task_no_data_intr;
- args->command_type = IDE_DRIVE_TASK_NO_DATA;
- return;
-
case WIN_SETMULT:
- args->handler = task_no_data_intr;
- args->command_type = IDE_DRIVE_TASK_NO_DATA;
- return;
-
case WIN_NOP:
- args->handler = task_no_data_intr;
- args->command_type = IDE_DRIVE_TASK_NO_DATA;
+ ar->handler = task_no_data_intr;
+ ar->command_type = IDE_DRIVE_TASK_NO_DATA;
return;
case WIN_FORMAT:
@@ -743,7 +731,7 @@
case WIN_QUEUED_SERVICE:
case WIN_PACKETCMD:
default:
- args->command_type = IDE_DRIVE_TASK_INVALID;
+ ar->command_type = IDE_DRIVE_TASK_INVALID;
return;
}
}
diff -urN linux-2.5.19/drivers/ide/ioctl.c linux/drivers/ide/ioctl.c
--- linux-2.5.19/drivers/ide/ioctl.c 2002-06-02 09:41:16.000000000 +0200
+++ linux/drivers/ide/ioctl.c 2002-06-02 11:40:55.000000000 +0200
@@ -235,7 +235,7 @@
if (!drive->driver)
return -EPERM;
- if (!drive->id || !(drive->id->capability & 1) || !drive->channel->XXX_udma)
+ if (!drive->id || !(drive->id->capability & 1) || !drive->channel->udma_setup)
return -EPERM;
if (ide_spin_wait_hwgroup(drive))
diff -urN linux-2.5.19/drivers/ide/main.c linux/drivers/ide/main.c
--- linux-2.5.19/drivers/ide/main.c 2002-06-01 23:17:28.000000000 +0200
+++ linux/drivers/ide/main.c 2002-06-02 11:53:37.000000000 +0200
@@ -520,12 +520,11 @@
ch->ata_write = old.ata_write;
ch->atapi_read = old.atapi_read;
ch->atapi_write = old.atapi_write;
- ch->XXX_udma = old.XXX_udma;
+ ch->udma_setup = old.udma_setup;
ch->udma_enable = old.udma_enable;
ch->udma_start = old.udma_start;
ch->udma_stop = old.udma_stop;
- ch->udma_read = old.udma_read;
- ch->udma_write = old.udma_write;
+ ch->udma_init = old.udma_init;
ch->udma_irq_status = old.udma_irq_status;
ch->udma_timeout = old.udma_timeout;
ch->udma_irq_lost = old.udma_irq_lost;
@@ -1092,7 +1091,7 @@
spin_unlock_irqrestore(&ide_lock, flags);
/* Default autotune or requested autotune */
if (drive->autotune != 2) {
- if (drive->channel->XXX_udma) {
+ if (drive->channel->udma_setup) {
/*
* Force DMAing for the beginning of the check. Some
@@ -1103,7 +1102,7 @@
*/
udma_enable(drive, 0, 0);
- drive->channel->XXX_udma(drive);
+ drive->channel->udma_setup(drive);
#ifdef CONFIG_BLK_DEV_IDE_TCQ_DEFAULT
udma_tcq_enable(drive, 1);
#endif
diff -urN linux-2.5.19/drivers/ide/ns87415.c linux/drivers/ide/ns87415.c
--- linux-2.5.19/drivers/ide/ns87415.c 2002-06-02 07:28:28.000000000 +0200
+++ linux/drivers/ide/ns87415.c 2002-06-02 12:08:52.000000000 +0200
@@ -101,11 +101,11 @@
}
-static int ns87415_udma_read(struct ata_device *drive, struct request *rq)
+static int ns87415_udma_init(struct ata_device *drive, struct request *rq)
{
ns87415_prepare_drive(drive, 1); /* select DMA xfer */
- if (!ata_do_udma(1, drive, rq)) /* use standard DMA stuff */
+ if (!udma_pci_init(drive, rq)) /* use standard DMA stuff */
return 0;
ns87415_prepare_drive(drive, 0); /* DMA failed: select PIO xfer */
@@ -113,26 +113,14 @@
return 1;
}
-static int ns87415_udma_write(struct ata_device *drive, struct request *rq)
-{
- ns87415_prepare_drive(drive, 1); /* select DMA xfer */
-
- if (!ata_do_udma(0, drive, rq)) /* use standard DMA stuff */
- return 0;
-
- ns87415_prepare_drive(drive, 0); /* DMA failed: select PIO xfer */
-
- return 1;
-}
-
-static int ns87415_dmaproc(struct ata_device *drive)
+static int ns87415_udma_setup(struct ata_device *drive)
{
if (drive->type != ATA_DISK) {
udma_enable(drive, 0, 0);
return 0;
}
- return XXX_ide_dmaproc(drive);
+ return udma_pci_setup(drive);
}
#endif
@@ -218,9 +206,8 @@
#ifdef CONFIG_BLK_DEV_IDEDMA
if (hwif->dma_base) {
hwif->udma_stop = ns87415_udma_stop;
- hwif->udma_read = ns87415_udma_read;
- hwif->udma_write = ns87415_udma_write;
- hwif->XXX_udma = ns87415_dmaproc;
+ hwif->udma_init = ns87415_udma_init;
+ hwif->udma_setup = ns87415_udma_setup;
}
#endif
diff -urN linux-2.5.19/drivers/ide/pcidma.c linux/drivers/ide/pcidma.c
--- linux-2.5.19/drivers/ide/pcidma.c 2002-06-02 09:41:16.000000000 +0200
+++ linux/drivers/ide/pcidma.c 2002-06-02 12:10:14.000000000 +0200
@@ -164,7 +164,7 @@
/*
* Configure a device for DMA operation.
*/
-int XXX_ide_dmaproc(struct ata_device *drive)
+int udma_pci_setup(struct ata_device *drive)
{
int config_allows_dma = 1;
struct hd_driveid *id = drive->id;
@@ -427,16 +427,6 @@
return (dma_stat & 7) != 4 ? (0x10 | dma_stat) : 0; /* verify good DMA status */
}
-int udma_pci_read(struct ata_device *drive, struct request *rq)
-{
- return ata_do_udma(1, drive, rq);
-}
-
-int udma_pci_write(struct ata_device *drive, struct request *rq)
-{
- return ata_do_udma(0, drive, rq);
-}
-
/*
* FIXME: This should be attached to a channel as we can see now!
*/
@@ -490,18 +480,16 @@
* We could just assign them, and then leave it up to the chipset
* specific code to override these after they've called this function.
*/
- if (!ch->XXX_udma)
- ch->XXX_udma = XXX_ide_dmaproc;
+ if (!ch->udma_setup)
+ ch->udma_setup = udma_pci_setup;
if (!ch->udma_enable)
ch->udma_enable = udma_pci_enable;
if (!ch->udma_start)
ch->udma_start = udma_pci_start;
if (!ch->udma_stop)
ch->udma_stop = udma_pci_stop;
- if (!ch->udma_read)
- ch->udma_read = udma_pci_read;
- if (!ch->udma_write)
- ch->udma_write = udma_pci_write;
+ if (!ch->udma_init)
+ ch->udma_init = udma_pci_init;
if (!ch->udma_irq_status)
ch->udma_irq_status = udma_pci_irq_status;
if (!ch->udma_timeout)
@@ -528,16 +516,20 @@
* It's exported only for host chips which use it for fallback or (too) late
* capability checking.
*/
-
-int ata_do_udma(unsigned int reading, struct ata_device *drive, struct request *rq)
+int udma_pci_init(struct ata_device *drive, struct request *rq)
{
+ u8 cmd;
+
if (ata_start_dma(drive, rq))
return 1;
if (drive->type != ATA_DISK)
return 0;
- reading <<= 3;
+ if (rq_data_dir(rq) == READ)
+ cmd = 0x08;
+ else
+ cmd = 0x00;
ide_set_handler(drive, ide_dma_intr, WAIT_CMD, dma_timer_expiry); /* issue cmd to drive */
if ((rq->flags & REQ_DRIVE_ACB) && (drive->addressing == 1)) {
@@ -545,22 +537,19 @@
struct ata_taskfile *args = rq->special;
outb(args->cmd, IDE_COMMAND_REG);
- } else if (drive->addressing) {
- outb(reading ? WIN_READDMA_EXT : WIN_WRITEDMA_EXT, IDE_COMMAND_REG);
- } else {
- outb(reading ? WIN_READDMA : WIN_WRITEDMA, IDE_COMMAND_REG);
- }
+ } else if (drive->addressing)
+ outb(cmd ? WIN_READDMA_EXT : WIN_WRITEDMA_EXT, IDE_COMMAND_REG);
+ else
+ outb(cmd ? WIN_READDMA : WIN_WRITEDMA, IDE_COMMAND_REG);
return udma_start(drive, rq);
}
-EXPORT_SYMBOL(ata_do_udma);
EXPORT_SYMBOL(ide_dma_intr);
EXPORT_SYMBOL(udma_pci_enable);
EXPORT_SYMBOL(udma_pci_start);
EXPORT_SYMBOL(udma_pci_stop);
-EXPORT_SYMBOL(udma_pci_read);
-EXPORT_SYMBOL(udma_pci_write);
+EXPORT_SYMBOL(udma_pci_init);
EXPORT_SYMBOL(udma_pci_irq_status);
EXPORT_SYMBOL(udma_pci_timeout);
EXPORT_SYMBOL(udma_pci_irq_lost);
diff -urN linux-2.5.19/drivers/ide/pdc202xx.c linux/drivers/ide/pdc202xx.c
--- linux-2.5.19/drivers/ide/pdc202xx.c 2002-06-01 23:17:28.000000000 +0200
+++ linux/drivers/ide/pdc202xx.c 2002-06-02 11:51:21.000000000 +0200
@@ -563,7 +563,7 @@
return !(hwif->speedproc(drive, mode));
}
-static int config_drive_xfer_rate(struct ata_device *drive)
+static int pdc202xx_udma_setup(struct ata_device *drive)
{
struct hd_driveid *id = drive->id;
struct ata_channel *hwif = drive->channel;
@@ -670,7 +670,7 @@
return (dma_stat & 4) == 4; /* return 1 if INTR asserted */
}
-static void pdc202xx_bug (struct ata_device *drive)
+static void pdc202xx_bug(struct ata_device *drive)
{
if (!drive->channel->resetproc)
return;
@@ -678,10 +678,6 @@
drive->channel->resetproc(drive);
}
-static int pdc202xx_dmaproc(struct ata_device *drive)
-{
- return config_drive_xfer_rate(drive);
-}
#endif
void pdc202xx_new_reset(struct ata_device *drive)
@@ -838,7 +834,7 @@
if (hwif->dma_base) {
hwif->udma_irq_lost = pdc202xx_bug;
hwif->udma_timeout = pdc202xx_bug;
- hwif->XXX_udma = pdc202xx_dmaproc;
+ hwif->udma_setup = pdc202xx_udma_setup;
hwif->highmem = 1;
if (!noautodma)
hwif->autodma = 1;
diff -urN linux-2.5.19/drivers/ide/pdc4030.c linux/drivers/ide/pdc4030.c
--- linux-2.5.19/drivers/ide/pdc4030.c 2002-06-02 09:41:16.000000000 +0200
+++ linux/drivers/ide/pdc4030.c 2002-06-02 10:21:42.000000000 +0200
@@ -619,16 +619,11 @@
return ide_stopped;
}
- ata_irq_enable(drive, 1); /* clear nIEN */
+ ata_irq_enable(drive, 1);
ata_mask(drive);
- outb(taskfile->feature, IDE_FEATURE_REG);
- outb(taskfile->sector_count, IDE_NSECTOR_REG);
- /* refers to number of sectors to transfer */
- outb(taskfile->sector_number, IDE_SECTOR_REG);
- /* refers to sector offset or start sector */
- outb(taskfile->low_cylinder, IDE_LCYL_REG);
- outb(taskfile->high_cylinder, IDE_HCYL_REG);
+ ata_out_regfile(drive, taskfile);
+
outb(taskfile->device_head, IDE_SELECT_REG);
outb(args->cmd, IDE_COMMAND_REG);
@@ -708,14 +703,9 @@
args.taskfile.low_cylinder = (block>>=8);
args.taskfile.high_cylinder = (block>>=8);
args.taskfile.device_head = ((block>>8)&0x0f)|drive->select.all;
- args.cmd = (rq_data_dir(rq)==READ)?PROMISE_READ:PROMISE_WRITE;
-
- /* We can't call ide_cmd_type_parser here, since it won't understand
- our command, but that doesn't matter, since we don't use the
- generic interrupt handlers either. Setup the bits of args that we
- will need. */
- args.handler = NULL;
- rq->special = &args;
+ args.cmd = (rq_data_dir(rq) == READ) ? PROMISE_READ : PROMISE_WRITE;
+ args.handler = NULL;
+ rq->special = &args;
return do_pdc4030_io(drive, &args, rq);
}
diff -urN linux-2.5.19/drivers/ide/piix.c linux/drivers/ide/piix.c
--- linux-2.5.19/drivers/ide/piix.c 2002-06-01 18:53:02.000000000 +0200
+++ linux/drivers/ide/piix.c 2002-06-02 11:46:11.000000000 +0200
@@ -253,7 +253,7 @@
#ifdef CONFIG_BLK_DEV_IDEDMA
-int piix_dmaproc(struct ata_device *drive)
+static int piix_udma_setup(struct ata_device *drive)
{
short w80 = drive->channel->udma_four;
@@ -399,7 +399,7 @@
#ifdef CONFIG_BLK_DEV_IDEDMA
if (hwif->dma_base) {
hwif->highmem = 1;
- hwif->XXX_udma = piix_dmaproc;
+ hwif->udma_setup = piix_udma_setup;
# ifdef CONFIG_IDEDMA_AUTO
if (!noautodma)
hwif->autodma = 1;
diff -urN linux-2.5.19/drivers/ide/serverworks.c linux/drivers/ide/serverworks.c
--- linux-2.5.19/drivers/ide/serverworks.c 2002-06-01 18:53:02.000000000 +0200
+++ linux/drivers/ide/serverworks.c 2002-06-02 12:14:42.000000000 +0200
@@ -290,7 +290,7 @@
return !svwks_tune_chipset(drive, mode);
}
-static int config_drive_xfer_rate(struct ata_device *drive)
+static int svwks_udma_setup(struct ata_device *drive)
{
struct hd_driveid *id = drive->id;
int on = 1;
@@ -387,11 +387,6 @@
return (dma_stat & 7) != 4 ? (0x10 | dma_stat) : 0; /* verify good DMA status */
}
-
-static int svwks_dmaproc(struct ata_device *drive)
-{
- return config_drive_xfer_rate(drive);
-}
#endif
static unsigned int __init svwks_init_chipset(struct pci_dev *dev)
@@ -506,7 +501,7 @@
hwif->autodma = 1;
#endif
hwif->udma_stop = svwks_udma_stop;
- hwif->XXX_udma = svwks_dmaproc;
+ hwif->udma_setup = svwks_udma_setup;
hwif->highmem = 1;
} else {
hwif->autodma = 0;
diff -urN linux-2.5.19/drivers/ide/sis5513.c linux/drivers/ide/sis5513.c
--- linux-2.5.19/drivers/ide/sis5513.c 2002-06-01 18:53:02.000000000 +0200
+++ linux/drivers/ide/sis5513.c 2002-06-02 12:23:59.000000000 +0200
@@ -466,12 +466,14 @@
return !sis5513_tune_chipset(drive, mode);
}
-static int config_drive_xfer_rate(struct ata_device *drive)
+static int sis5513_udma_setup(struct ata_device *drive)
{
struct hd_driveid *id = drive->id;
int on = 0;
int verbose = 1;
+ config_drive_art_rwp(drive);
+ config_art_rwp_pio(drive, 5);
config_chipset_for_pio(drive, 5);
if (id && (id->capability & 1) && drive->channel->autodma) {
@@ -520,14 +522,6 @@
return 0;
}
-
-static int sis5513_dmaproc(struct ata_device *drive)
-{
- config_drive_art_rwp(drive);
- config_art_rwp_pio(drive, 5);
-
- return config_drive_xfer_rate(drive);
-}
#endif
/* Chip detection and general config */
@@ -633,7 +627,7 @@
if (chipset_family > ATA_16) {
hwif->autodma = noautodma ? 0 : 1;
hwif->highmem = 1;
- hwif->XXX_udma = sis5513_dmaproc;
+ hwif->udma_setup = sis5513_udma_setup;
} else {
#endif
hwif->autodma = 0;
diff -urN linux-2.5.19/drivers/ide/sl82c105.c linux/drivers/ide/sl82c105.c
--- linux-2.5.19/drivers/ide/sl82c105.c 2002-05-29 20:42:50.000000000 +0200
+++ linux/drivers/ide/sl82c105.c 2002-06-02 12:04:05.000000000 +0200
@@ -130,7 +130,7 @@
* Check to see if the drive and
* chipset is capable of DMA mode
*/
-static int sl82c105_check_drive(struct ata_device *drive)
+static int sl82c105_dma_setup(struct ata_device *drive)
{
int on = 0;
@@ -173,15 +173,6 @@
}
/*
- * Our very own dmaproc. We need to intercept various calls
- * to fix up the SL82C105 specific behaviour.
- */
-static int sl82c105_dmaproc(struct ata_device *drive)
-{
- return sl82c105_check_drive(drive);
-}
-
-/*
* The SL82C105 holds off all IDE interrupts while in DMA mode until
* all DMA activity is completed. Sometimes this causes problems (eg,
* when the drive wants to report an error condition).
@@ -215,16 +206,10 @@
* The generic IDE core will have disabled the BMEN bit before this
* function is called.
*/
-static int sl82c105_dma_read(struct ata_device *drive, struct request *rq)
-{
- sl82c105_reset_host(drive->channel->pci_dev);
- return udma_pci_read(drive, rq);
-}
-
-static int sl82c105_dma_write(struct ata_device *drive, struct request *rq)
+static int sl82c105_dma_init(struct ata_device *drive, struct request *rq)
{
sl82c105_reset_host(drive->channel->pci_dev);
- return udma_pci_write(drive, rq);
+ return udma_pci_init(drive, rq);
}
static void sl82c105_timeout(struct ata_device *drive)
@@ -354,12 +339,11 @@
ata_init_dma(ch, dma_base);
if (bridge_rev <= 5)
- ch->XXX_udma = NULL;
+ ch->udma_setup = NULL;
else {
- ch->XXX_udma = sl82c105_dmaproc;
+ ch->udma_setup = sl82c105_dma_setup;
ch->udma_enable = sl82c105_dma_enable;
- ch->udma_read = sl82c105_dma_read;
- ch->udma_write = sl82c105_dma_write;
+ ch->udma_init = sl82c105_dma_init;
ch->udma_timeout = sl82c105_timeout;
ch->udma_irq_lost = sl82c105_lostirq;
}
diff -urN linux-2.5.19/drivers/ide/trm290.c linux/drivers/ide/trm290.c
--- linux-2.5.19/drivers/ide/trm290.c 2002-06-01 23:17:28.000000000 +0200
+++ linux/drivers/ide/trm290.c 2002-06-02 12:08:38.000000000 +0200
@@ -191,10 +191,18 @@
return (inw(ch->dma_base + 2) != 0x00ff);
}
-static int do_udma(unsigned int reading, struct ata_device *drive, struct request *rq)
+static int trm290_udma_init(struct ata_device *drive, struct request *rq)
{
struct ata_channel *ch = drive->channel;
- unsigned int count, writing;
+ unsigned int count;
+ int writing;
+ int reading;
+
+
+ if (rq_data_dir(rq) == READ)
+ reading = 1;
+ else
+ reading = 0;
if (!reading) {
reading = 0;
@@ -228,24 +236,14 @@
return 0;
}
-static int trm290_udma_read(struct ata_device *drive, struct request *rq)
-{
- return do_udma(1, drive, rq);
-}
-
-static int trm290_udma_write(struct ata_device *drive, struct request *rq)
-{
- return do_udma(0, drive, rq);
-}
-
static int trm290_udma_irq_status(struct ata_device *drive)
{
return (inw(drive->channel->dma_base + 2) == 0x00ff);
}
-static int trm290_dmaproc(struct ata_device *drive)
+static int trm290_udma_setup(struct ata_device *drive)
{
- return XXX_ide_dmaproc(drive);
+ return udma_pci_setup(drive);
}
#endif
@@ -301,10 +299,9 @@
#ifdef CONFIG_BLK_DEV_IDEDMA
hwif->udma_start = trm290_udma_start;
hwif->udma_stop = trm290_udma_stop;
- hwif->udma_read = trm290_udma_read;
- hwif->udma_write = trm290_udma_write;
+ hwif->udma_init = trm290_udma_init;
hwif->udma_irq_status = trm290_udma_irq_status;
- hwif->XXX_udma = trm290_dmaproc;
+ hwif->udma_setup = trm290_udma_setup;
#endif
hwif->selectproc = &trm290_selectproc;
diff -urN linux-2.5.19/drivers/ide/via82cxxx.c linux/drivers/ide/via82cxxx.c
--- linux-2.5.19/drivers/ide/via82cxxx.c 2002-06-01 18:53:02.000000000 +0200
+++ linux/drivers/ide/via82cxxx.c 2002-06-02 11:42:53.000000000 +0200
@@ -223,7 +223,7 @@
}
#ifdef CONFIG_BLK_DEV_IDEDMA
-static int via82cxxx_dmaproc(struct ata_device *drive)
+static int via82cxxx_udma_setup(struct ata_device *drive)
{
short w80 = drive->channel->udma_four;
@@ -368,7 +368,7 @@
#ifdef CONFIG_BLK_DEV_IDEDMA
if (hwif->dma_base) {
hwif->highmem = 1;
- hwif->XXX_udma = &via82cxxx_dmaproc;
+ hwif->udma_setup = via82cxxx_udma_setup;
# ifdef CONFIG_IDEDMA_AUTO
if (!noautodma)
hwif->autodma = 1;
diff -urN linux-2.5.19/drivers/scsi/ide-scsi.c linux/drivers/scsi/ide-scsi.c
--- linux-2.5.19/drivers/scsi/ide-scsi.c 2002-06-02 09:41:16.000000000 +0200
+++ linux/drivers/scsi/ide-scsi.c 2002-06-02 11:53:22.000000000 +0200
@@ -407,12 +407,8 @@
pc->current_position=pc->buffer;
bcount = min(pc->request_transfer, 63 * 1024); /* Request to transfer the entire buffer at once */
- if (drive->using_dma && rq->bio) {
- if (test_bit (PC_WRITING, &pc->flags))
- dma_ok = !udma_write(drive, rq);
- else
- dma_ok = !udma_read(drive, rq);
- }
+ if (drive->using_dma && rq->bio)
+ dma_ok = !udma_init(drive, rq);
ata_select(drive, 10);
ata_irq_enable(drive, 1);
diff -urN linux-2.5.19/include/linux/ide.h linux/include/linux/ide.h
--- linux-2.5.19/include/linux/ide.h 2002-06-02 09:41:16.000000000 +0200
+++ linux/include/linux/ide.h 2002-06-02 12:33:06.000000000 +0200
@@ -425,7 +425,7 @@
* mode itself.
*/
- /* setup disk on a channel for a particular transfer mode */
+ /* setup disk on a channel for a particular PIO transfer mode */
void (*tuneproc) (struct ata_device *, byte pio);
/* setup the chipset timing for a particular transfer mode */
@@ -455,18 +455,13 @@
void (*atapi_read)(struct ata_device *, void *, unsigned int);
void (*atapi_write)(struct ata_device *, void *, unsigned int);
- int (*XXX_udma)(struct ata_device *);
+ int (*udma_setup)(struct ata_device *);
void (*udma_enable)(struct ata_device *, int, int);
-
int (*udma_start) (struct ata_device *, struct request *rq);
int (*udma_stop) (struct ata_device *);
-
- int (*udma_read) (struct ata_device *, struct request *rq);
- int (*udma_write) (struct ata_device *, struct request *rq);
-
+ int (*udma_init) (struct ata_device *, struct request *rq);
int (*udma_irq_status) (struct ata_device *);
-
void (*udma_timeout) (struct ata_device *);
void (*udma_irq_lost) (struct ata_device *);
@@ -770,14 +765,12 @@
return drive->channel->udma_stop(drive);
}
-static inline int udma_read(struct ata_device *drive, struct request *rq)
-{
- return drive->channel->udma_read(drive, rq);
-}
-
-static inline int udma_write(struct ata_device *drive, struct request *rq)
+/*
+ * Initiate actual DMA data transfer. The direction is encoded in the request.
+ */
+static inline int udma_init(struct ata_device *drive, struct request *rq)
{
- return drive->channel->udma_write(drive, rq);
+ return drive->channel->udma_init(drive, rq);
}
static inline int udma_irq_status(struct ata_device *drive)
@@ -797,14 +790,14 @@
#ifdef CONFIG_BLK_DEV_IDEDMA
-void udma_pci_enable(struct ata_device *drive, int on, int verbose);
-int udma_pci_start(struct ata_device *drive, struct request *rq);
-int udma_pci_stop(struct ata_device *drive);
-int udma_pci_read(struct ata_device *drive, struct request *rq);
-int udma_pci_write(struct ata_device *drive, struct request *rq);
-int udma_pci_irq_status(struct ata_device *drive);
-void udma_pci_timeout(struct ata_device *drive);
-void udma_pci_irq_lost(struct ata_device *);
+extern void udma_pci_enable(struct ata_device *drive, int on, int verbose);
+extern int udma_pci_start(struct ata_device *drive, struct request *rq);
+extern int udma_pci_stop(struct ata_device *drive);
+extern int udma_pci_init(struct ata_device *drive, struct request *rq);
+extern int udma_pci_irq_status(struct ata_device *drive);
+extern void udma_pci_timeout(struct ata_device *drive);
+extern void udma_pci_irq_lost(struct ata_device *);
+extern int udma_pci_setup(struct ata_device *);
extern int udma_new_table(struct ata_channel *, struct request *);
extern void udma_destroy_table(struct ata_channel *);
@@ -813,14 +806,11 @@
extern int udma_black_list(struct ata_device *);
extern int udma_white_list(struct ata_device *);
-extern int ata_do_udma(unsigned int reading, struct ata_device *drive, struct request *rq);
-
extern ide_startstop_t udma_tcq_taskfile(struct ata_device *, struct request *);
extern int udma_tcq_enable(struct ata_device *, int);
extern ide_startstop_t ide_dma_intr(struct ata_device *, struct request *);
extern int check_drive_lists(struct ata_device *, int good_bad);
-extern int XXX_ide_dmaproc(struct ata_device *);
extern void ide_release_dma(struct ata_channel *);
extern int ata_start_dma(struct ata_device *, struct request *rq);
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Fri Jun 07 2002 - 22:00:13 EST