Hi Linus,
find attached a patch (against 2.5.23-dj2) to the SCSI subsystem which
adds a file /proc/scsi/map, which provides a listing of SCSI devices,
enumerated by the CBTU/HCIL tuple and the high-level devices attached to
them.
This information is useful for
* the user who wants to find out to what high-level interfaces the SCSI
devices in /proc/scsi/scsi list
* userspace tools that want to collect information about the SCSI devices
in order to provide persistent device naming and need to use the
corresponding sg devices for this.
In case the admin ensures the stability of the CBTU nexus, the included
script is even enough to provide persistent naming.
* allowing boot=/dev/scsi/sdcXbXtXuXpX parameter (even without devfs),
extra patch required, will be send by separate mail
* reporting major:minor pairs to userspace for dynamic device allocation
that's needed to support > 128 disks.
garloff@pckurt:~ $ cat /proc/scsi/map
0,0,00,00 0x05 1 sg0 c:15:00 sr0 b:0b:00
1,0,01,00 0x05 1 sg1 c:15:01 sr1 b:0b:01
1,0,02,00 0x01 1 sg2 c:15:02 osst0 c:ce:00
1,0,03,00 0x05 1 sg3 c:15:03 sr2 b:0b:02
1,0,05,00 0x00 1 sg4 c:15:04 sda b:08:00
1,0,09,00 0x00 1 sg5 c:15:05 sdb b:08:10
2,0,01,00 0x05 1 sg6 c:15:06 sr3 b:0b:03
2,0,02,00 0x01 1 sg7 c:15:07 osst1 c:ce:01
2,0,03,00 0x05 1 sg8 c:15:08 sr4 b:0b:04
2,0,05,00 0x00 1 sg9 c:15:09 sdc b:08:20
2,0,09,00 0x00 1 sg10 c:15:0a sdd b:08:30
3,0,10,00 0x00 1 sg11 c:15:0b sde b:08:40
3,0,12,00 0x00 1 sg12 c:15:0c sdf b:08:50
Compared to the patch against 2.4.19-pre10, which has been discussed on
LKML, I removed the header line from the map file and added a text file
documenting the format of /proc/scsi/map.
The patch has been ported to 2.5 by Andries Brouwer. I have removed most
of his formatting cleanups (to unrelated code in the same files) that he
has done. Doug Gilbert has given a lot of useful feedback. Thx!
Please apply!
diff -uNr linux-2.5.23-dj2/Documentation/scsi-devs.sh linux-2.5.23-dj2-scsimap/Documentation/scsi-devs.sh
--- linux-2.5.23-dj2/Documentation/scsi-devs.sh Thu Jan 1 01:00:00 1970
+++ linux-2.5.23-dj2-scsimap/Documentation/scsi-devs.sh Fri Jun 14 22:37:11 2002
@@ -0,0 +1,154 @@
+#!/bin/bash
+# Script to create SCSI device nodes according to their physical
+# address (host controller no,bus/channel,target SCSI ID,unit SCSI LUN)
+# using the /proc/scsi/map introduced in Linux 2.4.20pre/2.5.2x
+# (c) Kurt Garloff <garloff@suse.de>, 2002-06-13
+# License: GNU GPL v2
+
+# Settings
+
+# Target directory for device nodes/links
+TDIR=/dev/scsi
+
+# Make symbolic links or create fresh nodes in $TDIR
+# For link mode, the dev nodes will still be made if needed
+MODE=
+
+# In link mode, where is the real /dev dir ?
+DEVDIR=..
+
+# Ownership and permissions of newly created device nodes
+OWNER="root.disk"
+PERM="0660"
+SDIRPERM="0755"
+
+# Make scsi disk partitions (0 = off)
+SDPART=15
+
+# End of settings
+
+# Options
+# -f: Remove all old devs
+if test "$1" = "-f"; then
+ rm -f $TDIR/*
+ shift
+fi
+# -l: Make links
+if test "$1" = "-l"; then
+ MODE=LINK
+ shift
+fi
+
+# Sanitize environment
+export LANG=posix
+unset IFS
+#umask `printf %o $[0777-$PERM]`
+PATH=/bin:/usr/bin:/sbin:/usr/sbin
+
+# Functions
+function exit_fail
+{
+ echo $1
+ exit $2
+}
+
+# Build new scsi name based on oldname (prefix) and
+# append host,channel,id,lun numbers that are unique
+# and persistent identifiers for the device.
+function builddevnm
+{
+ if test "${5:0:2}" = "sd"; then
+ NM="sdc$1b$2t${3#0}u${4#0}"
+ else
+ NM="${5%%[0-9]*}c$1b$2t${3#0}u${4#0}"
+ fi
+}
+
+# Make device node
+# Parameters filename type maj(hex) min(hex) minadd(dec)
+function mk_nod
+{
+ rm -f $1
+ mknod -m $PERM $1 $2 $[0x$3] $[0x$4+$5]
+ chown $OWNER $1
+}
+
+# Make device by creating node or symlinking
+# Parameters oldname device(tp:maj:min) newname minadd
+function mk_dev
+{
+ IFS=":"
+ if test "$MODE" = "LINK"; then
+ if test ! -e $TDIR/$DEVDIR/$1; then
+ mk_nod $TDIR/$DEVDIR/$1 $2 $4
+ fi
+ ln -sf $DEVDIR/$1 $TDIR/$3
+ else
+ mk_nod $TDIR/$3 $2 $4
+ fi
+ unset IFS
+}
+
+# Make multiple devices in case we do have sd partitions
+# Parameters oldname device(tp:maj:min) newname
+function mk_devs
+{
+ mk_dev $1 $2 $3 0
+ # Handle partitions
+ if test "${1:0:2}" = "sd" -a "$SDPART" != "0"; then
+ #unset IFS
+ for no in `seq 1 $SDPART`; do
+ mk_dev $1$no $2 $3p$no $no
+ done
+ fi
+ # Handle nst/nosst
+ if test "${1:0:2}" = "st" -o "${1:0:4}" = "osst"; then
+ mk_dev n$1 $2 n$3 128
+ fi
+}
+
+# Main() Script
+if ! test -e /proc/scsi/map; then
+ exit_fail "/proc/scsi/map does not exist" 1
+fi
+if ! test -d $TDIR; then
+ mkdir -m $SDIRMODE $TDIR || exit_fail "Failed to create $TDIR" 2
+ chown $OWNER $TDIR
+fi
+
+# We might have been called by some sort of hotplug event
+# and are only support to add a single device
+# Syntax for this is [-l] add host channel id lun
+if test "$1" = "add"; then
+ CMPAGAINST="$2,$3,`printf %02i $4`,`printf %02i $5`"
+else
+ unset CMPAGAINST
+fi
+# The main processing loop
+while read cbtu tp onl sgnm sgdev othnm othdev oothnm oothdev rest; do
+ # Skip comment line(s)
+ if test "${cbtu:0:1}" = "#"; then continue; fi
+ # If we're just dealing with one device, do skip the others
+ if test ! -z "$CMPAGAINST" -a "$CMPAGAINST" != "$cbtu"; then continue; fi
+ # now parse line
+ IFS=","
+ # Test for validity of sg device
+ if test "$sgnm" != "sg?"; then
+ builddevnm $cbtu $sgnm
+ mk_dev $sgnm $sgdev $NM 0
+ fi
+ # There is possibly a second device
+ if test ! -z "$othnm" -a ! "$othnm" = "none"; then
+ IFS=","
+ builddevnm $cbtu $othnm
+ mk_devs $othnm $othdev $NM
+ # Maybe even a third one
+ if test ! -z "$oothnm" -a ! "$oothnm" = "none"; then
+ IFS=","
+ builddevnm $cbtu $oothnm
+ mk_devs $oothnm $oothdev $NM
+ fi
+ fi
+ unset IFS
+done < /proc/scsi/map
+
diff -uNr linux-2.5.23-dj2/Documentation/scsi-map.txt linux-2.5.23-dj2-scsimap/Documentation/scsi-map.txt
--- linux-2.5.23-dj2/Documentation/scsi-map.txt Thu Jan 1 01:00:00 1970
+++ linux-2.5.23-dj2-scsimap/Documentation/scsi-map.txt Wed Jun 19 18:58:30 2002
@@ -0,0 +1,61 @@
+/proc/scsi/map file format
+==========================
+The file /proc/scsi/map reports the mapping of SCSI devices to high-level
+drivers (sg,sr,sd,st,osst) in Linux. The SCSI devices are identified by
+Controller/host number, bus/channel number, SCSI Target ID and SCSI Unit/LUN
+number.
+
+The output looks as following:
+
+garloff@pckurt:/raid5/Kernel $ head -18 /proc/scsi/map
+0,0,00,00 0x05 1 sg0 c:15:00 sr0 b:0b:00
+1,0,01,00 0x05 1 sg1 c:15:01 sr1 b:0b:01
+1,0,02,00 0x01 1 sg2 c:15:02 osst0 c:ce:00
+1,0,03,00 0x05 1 sg3 c:15:03 sr2 b:0b:02
+1,0,05,00 0x00 1 sg4 c:15:04 sda b:08:00
+1,0,09,00 0x00 1 sg5 c:15:05 sdb b:08:10
+2,0,01,00 0x05 1 sg6 c:15:06 sr3 b:0b:03
+2,0,02,00 0x01 1 sg7 c:15:07 osst1 c:ce:01
+2,0,03,00 0x05 1 sg8 c:15:08 sr4 b:0b:04
+2,0,05,00 0x00 1 sg9 c:15:09 sdc b:08:20
+2,0,09,00 0x00 1 sg10 c:15:0a sdd b:08:30
+3,0,10,00 0x00 1 sg11 c:15:0b sde b:08:40
+3,0,12,00 0x00 1 sg12 c:15:0c sdf b:08:50
+
+The format contains a variable number of columns, separated by a TAB '\t'
+character.
+
+1st column: The Controller, Bus, Target, Unit (or call it Host, Channel, ID,
+ LUN) tuple that identifies a SCSI device. The numbers are all
+ in decimal format and separated by commas.
+2nd column: Device type as reported in the peripheral device type field
+ as reported by SCSI INQUIRY. Hexadecimal.
+3rd column: Flag whether the device is online.
+
+These columns are followed by pairs of columns, depending on how many
+high-level drivers are attached to the device:
+
+Nth column: Driver name with an index attached. This coïncides with the old
+ style device naming used on SCSI distributions and documented
+ in devices.txt. For disks, therefore the index is composed of
+ characters to produce the names sda ... sdz, sdaa ... sdaz,
+ sdba ... etc.
+(N+1)th c.: Device node that belongs to this device. First character is
+ identifying whether we deal with a character device (c) or a
+ block device(b). The major and minor numbers follow in hexa-
+ decimal formast, separated with colons (:).
+
+The sg devices are reported first.
+If there is no sg device, sg? c:NN:NN will be reported.
+For the other devices the columns are just left empty.
+
+The reason for this special ahndling of sg is that sg is special in
+that it can drive all devices and can be used by userspace tools
+to inquire extra information (by sending SCSI commands or doing ioctls)
+in order to provide persistent device naming.
+
+Note that only loaded drivers (modules) can attach to the devices, so
+you e.g. won't see "sr" output, unless you have the sr driver compiled
+into your kernel or loaded as module.
+
+ Kurt Garloff <garloff@suse.de>, 2002-06-19
diff -uNr linux-2.5.23-dj2/drivers/scsi/hosts.h linux-2.5.23-dj2-scsimap/drivers/scsi/hosts.h
--- linux-2.5.23-dj2/drivers/scsi/hosts.h Thu Jun 20 01:44:47 2002
+++ linux-2.5.23-dj2-scsimap/drivers/scsi/hosts.h Thu Jun 20 02:03:21 2002
@@ -486,6 +486,7 @@
void (*detach)(Scsi_Device *);
int (*init_command)(Scsi_Cmnd *); /* Used by new queueing code.
Selects command for blkdevs */
+ int (*find_kdev)(Scsi_Device *, char*, kdev_t*); /* find back dev. */
};
void scsi_initialize_queue(Scsi_Device * SDpnt, struct Scsi_Host * SHpnt);
diff -uNr linux-2.5.23-dj2/drivers/scsi/osst.c linux-2.5.23-dj2-scsimap/drivers/scsi/osst.c
--- linux-2.5.23-dj2/drivers/scsi/osst.c Wed Jun 19 04:11:54 2002
+++ linux-2.5.23-dj2-scsimap/drivers/scsi/osst.c Thu Jun 20 02:03:21 2002
@@ -155,6 +155,7 @@
static int osst_attach(Scsi_Device *);
static int osst_detect(Scsi_Device *);
static void osst_detach(Scsi_Device *);
+static int osst_find_kdev(Scsi_Device *, char*, kdev_t*);
struct Scsi_Device_Template osst_template =
{
@@ -166,7 +167,8 @@
detect: osst_detect,
init: osst_init,
attach: osst_attach,
- detach: osst_detach
+ detach: osst_detach,
+ find_kdev: osst_find_kdev,
};
static int osst_int_ioctl(OS_Scsi_Tape *STp, Scsi_Request ** aSRpnt, unsigned int cmd_in,unsigned long arg);
@@ -5417,6 +5419,24 @@
return 0;
}
+static int osst_find_kdev(Scsi_Device *sdp, char* nm, kdev_t *dev)
+{
+ int i;
+ OS_Scsi_Tape *ostp;
+
+ if (sdp && sdp->type == TYPE_TAPE && osst_supports(sdp)) {
+ for (ostp = os_scsi_tapes[i = 0]; i < osst_template.dev_max;
+ ostp = os_scsi_tapes[++i]) {
+ if (ostp && ostp->device == sdp) {
+ sprintf (nm, "osst%i", i);
+ *dev = mk_kdev(OSST_MAJOR, i);
+ return 0;
+ }
+ }
+ }
+ return 1;
+}
+
static int osst_attach(Scsi_Device * SDp)
{
OS_Scsi_Tape * tpnt;
diff -uNr linux-2.5.23-dj2/drivers/scsi/scsi.c linux-2.5.23-dj2-scsimap/drivers/scsi/scsi.c
--- linux-2.5.23-dj2/drivers/scsi/scsi.c Wed Jun 19 04:11:55 2002
+++ linux-2.5.23-dj2-scsimap/drivers/scsi/scsi.c Thu Jun 20 02:06:34 2002
@@ -78,6 +78,7 @@
#ifdef CONFIG_PROC_FS
static int scsi_proc_info(char *buffer, char **start, off_t offset, int length);
+static int scsi_proc_map (char *buffer, char **start, off_t offset, int length);
static void scsi_dump_status(int level);
#endif
@@ -1545,6 +1546,71 @@
}
#ifdef CONFIG_PROC_FS
+/*
+ * Output the mapping of physical devices (contorller,channel.id,lun)
+ * to devices (sg and other highlevel drivers) to /proc/scsi/map.
+ * Caveat: No locking is done, so if your scsi config changes during
+ * reading this file, you may read garbled data. KG, 2002-06-14
+ */
+static int scsi_proc_map(char *buffer, char **start, off_t offset, int length)
+{
+ Scsi_Device *scd;
+ struct Scsi_Host *HBA_ptr;
+ int size = 0, len = 0;
+ off_t begin = 0;
+ off_t pos = 0;
+#ifdef CONFIG_KMOD
+ int repeat = 0;
+#endif
+
+ struct Scsi_Device_Template *sg_t;
+ do {
+ sg_t = scsi_devicelist;
+ while (sg_t && !(sg_t->tag && !strcmp(sg_t->tag, "sg")))
+ sg_t = sg_t->next;
+#ifdef CONFIG_KMOD
+ if (!repeat && !sg_t)
+ request_module("sg");
+ } while (!repeat++);
+#else
+ } while (0);
+#endif
+ /*
+ * First, see if there are any attached devices or not.
+ */
+ for (HBA_ptr = scsi_hostlist; HBA_ptr; HBA_ptr = HBA_ptr->next) {
+ if (HBA_ptr->host_queue != NULL) {
+ break;
+ }
+ }
+ if (!HBA_ptr)
+ goto stop_map_output;
+
+ pos = begin;
+
+ for (HBA_ptr = scsi_hostlist; HBA_ptr; HBA_ptr = HBA_ptr->next) {
+ for (scd = HBA_ptr->host_queue; scd; scd = scd->next) {
+ proc_print_scsimap(scd, buffer, &size, len, sg_t);
+ len += size;
+ pos = begin + len;
+
+ if (pos < offset) {
+ len = 0;
+ begin = pos;
+ }
+ if (pos > offset + length)
+ goto stop_map_output;
+ }
+ }
+
+ stop_map_output:
+ *start = buffer + (offset - begin); /* Start of wanted data */
+ len -= (offset - begin); /* Start slop */
+ if (len > length)
+ len = length; /* Ending slop */
+ return (len);
+}
+
static int scsi_proc_info(char *buffer, char **start, off_t offset, int length)
{
Scsi_Device *scd;
@@ -2505,6 +2571,7 @@
static int __init init_scsi(void)
{
struct proc_dir_entry *generic;
+ struct proc_dir_entry *map;
int i;
printk(KERN_INFO "SCSI subsystem driver " REVISION "\n");
@@ -2541,6 +2608,13 @@
return -ENOMEM;
}
generic->write_proc = proc_scsi_gen_write;
+
+ map = create_proc_info_entry ("scsi/map", 0, 0, scsi_proc_map);
+ if (!map) {
+ printk (KERN_ERR "cannot init /proc/scsi/map\n");
+ remove_proc_entry("scsi", 0);
+ return -ENOMEM;
+ }
#endif
scsi_devfs_handle = devfs_mk_dir (NULL, "scsi", NULL);
@@ -2571,6 +2645,7 @@
#ifdef CONFIG_PROC_FS
/* No, we're not here anymore. Don't show the /proc/scsi files. */
+ remove_proc_entry ("scsi/map", 0);
remove_proc_entry ("scsi/scsi", 0);
remove_proc_entry ("scsi", 0);
#endif
diff -uNr linux-2.5.23-dj2/drivers/scsi/scsi.h linux-2.5.23-dj2-scsimap/drivers/scsi/scsi.h
--- linux-2.5.23-dj2/drivers/scsi/scsi.h Thu Jun 20 01:44:48 2002
+++ linux-2.5.23-dj2-scsimap/drivers/scsi/scsi.h Thu Jun 20 02:03:21 2002
@@ -523,6 +523,8 @@
* Prototypes for functions in scsi_proc.c
*/
extern void proc_print_scsidevice(Scsi_Device *, char *, int *, int);
+extern void proc_print_scsimap(Scsi_Device *, char *, int *, int,
+ struct Scsi_Device_Template *);
extern struct proc_dir_entry *proc_scsi;
/*
diff -uNr linux-2.5.23-dj2/drivers/scsi/scsi_proc.c linux-2.5.23-dj2-scsimap/drivers/scsi/scsi_proc.c
--- linux-2.5.23-dj2/drivers/scsi/scsi_proc.c Wed Jun 19 04:11:47 2002
+++ linux-2.5.23-dj2-scsimap/drivers/scsi/scsi_proc.c Thu Jun 20 02:03:21 2002
@@ -300,29 +301,54 @@
return;
}
+
+void proc_print_scsimap(Scsi_Device *scd, char *buffer, int *size, int len,
+ struct Scsi_Device_Template *sg_t)
+{
+ int y, err;
+ char nm[16];
+ kdev_t kdev;
+ int att = scd->attached;
+ struct Scsi_Device_Template *sd_t = scsi_devicelist;
+
+ y = sprintf(buffer + len,
+ "%i,%i,%02i,%02i\t0x%02x\t%i",
+ scd->host->host_no, scd->channel, scd->id, scd->lun,
+ scd->type, scd->online);
+ if (sg_t && sg_t->find_kdev && !(sg_t->find_kdev(scd, nm, &kdev))) {
+ y += sprintf(buffer + len + y,
+ "\t%s\tc:%02x:%02x",
+ nm, major(kdev), minor(kdev));
+ --att;
+ } else {
+ y += sprintf(buffer + len + y,
+ "\tsg?\tc:NN:NN");
+ }
+ while (att && sd_t) {
+ if (sd_t->scsi_type != 0xff && sd_t->find_kdev) {
+ err = sd_t->find_kdev(scd, nm, &kdev);
+ if (!err) {
+ y += sprintf(buffer + len + y,
+ "\t%s\t%c:%02x:%02x",
+ nm, (sd_t->blk? 'b': 'c'),
+ major(kdev), minor(kdev));
+ --att;
+ }
+ }
+ sd_t = sd_t->next;
+ }
+
+ y += sprintf(buffer + len + y, "\n");
+ *size = y;
+}
+
#else /* if !CONFIG_PROC_FS */
void proc_print_scsidevice(Scsi_Device * scd, char *buffer, int *size, int len)
{
}
+void proc_print_scsimap(Scsi_Device *scd, char *buffer, int *size, int len)
+{
+}
#endif /* CONFIG_PROC_FS */
-
-/*
- * Overrides for Emacs so that we get a uniform tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-indent-level: 4
- * c-brace-imaginary-offset: 0
- * c-brace-offset: -4
- * c-argdecl-indent: 4
- * c-label-offset: -4
- * c-continued-statement-offset: 4
- * c-continued-brace-offset: 0
- * indent-tabs-mode: nil
- * tab-width: 8
- * End:
- */
diff -uNr linux-2.5.23-dj2/drivers/scsi/sd.c linux-2.5.23-dj2-scsimap/drivers/scsi/sd.c
--- linux-2.5.23-dj2/drivers/scsi/sd.c Thu Jun 20 01:44:48 2002
+++ linux-2.5.23-dj2-scsimap/drivers/scsi/sd.c Thu Jun 20 02:03:21 2002
@@ -103,6 +103,7 @@
static int sd_detect(Scsi_Device *);
static void sd_detach(Scsi_Device *);
static int sd_init_command(Scsi_Cmnd *);
+static int sd_find_kdev(Scsi_Device*, char*, kdev_t*);
static struct Scsi_Device_Template sd_template = {
module:THIS_MODULE,
@@ -122,6 +123,7 @@
attach:sd_attach,
detach:sd_detach,
init_command:sd_init_command,
+ find_kdev:sd_find_kdev,
};
static void sd_rw_intr(Scsi_Cmnd * SCpnt);
@@ -285,6 +287,24 @@
}
}
+static int sd_find_kdev(Scsi_Device *sdp, char* nm, kdev_t *dev)
+{
+ Scsi_Disk *sdkp;
+ int dsk_nr;
+
+ if (sdp && (sdp->type == TYPE_DISK || sdp->type == TYPE_MOD)) {
+ for (dsk_nr = 0; dsk_nr < sd_template.dev_max; ++dsk_nr) {
+ sdkp = sd_dsk_arr[dsk_nr];
+ if (sdkp->device == sdp) {
+ sd_dskname(dsk_nr, nm);
+ *dev = MKDEV_SD(dsk_nr);
+ return 0;
+ }
+ }
+ }
+ return 1;
+}
+
/**
* sd_find_queue - yields queue associated with device
* @dev: kernel device descriptor (kdev_t)
diff -uNr linux-2.5.23-dj2/drivers/scsi/sg.c linux-2.5.23-dj2-scsimap/drivers/scsi/sg.c
--- linux-2.5.23-dj2/drivers/scsi/sg.c Wed Jun 19 04:11:54 2002
+++ linux-2.5.23-dj2-scsimap/drivers/scsi/sg.c Thu Jun 20 02:03:21 2002
@@ -111,6 +111,7 @@
static void sg_finish(void);
static int sg_detect(Scsi_Device *);
static void sg_detach(Scsi_Device *);
+static int sg_find_kdev(Scsi_Device *, char*, kdev_t*);
static Scsi_Request * dummy_cmdp; /* only used for sizeof */
@@ -120,6 +121,7 @@
static struct Scsi_Device_Template sg_template =
{
module:THIS_MODULE,
+ name:"generic",
tag:"sg",
scsi_type:0xff,
major:SCSI_GENERIC_MAJOR,
@@ -127,7 +129,8 @@
init:sg_init,
finish:sg_finish,
attach:sg_attach,
- detach:sg_detach
+ detach:sg_detach,
+ find_kdev:sg_find_kdev
};
@@ -2632,6 +2635,37 @@
}
#ifdef CONFIG_PROC_FS
+static int sg_find_kdev(Scsi_Device* sdp, char *nm, kdev_t *dev)
+{
+ unsigned long iflags;
+ int err = 1;
+
+ if (sdp && sg_dev_arr) {
+ int k;
+ read_lock_irqsave(&sg_dev_arr_lock, iflags);
+ for (k = 0; k < sg_template.dev_max; ++k) {
+ if (sg_dev_arr[k] && sg_dev_arr[k]->device == sdp) {
+ sprintf (nm, "sg%i", k);
+ *dev = sg_dev_arr[k]->i_rdev;
+ err = 0;
+ break;
+ }
+ }
+ read_unlock_irqrestore(&sg_dev_arr_lock, iflags);
+ }
+ return err;
+}
+#else
+/* Not needed without procfs support */
+static int sg_find_kdev(Scsi_Device* sdp, char *nm, kdev_t *dev)
+{
+ *nm = 0;
+ *kdev = NODEV;
+ return 1;
+}
+#endif
+
+#ifdef CONFIG_PROC_FS
static struct proc_dir_entry * sg_proc_sgp = NULL;
diff -uNr linux-2.5.23-dj2/drivers/scsi/sr.c linux-2.5.23-dj2-scsimap/drivers/scsi/sr.c
--- linux-2.5.23-dj2/drivers/scsi/sr.c Wed Jun 19 04:11:50 2002
+++ linux-2.5.23-dj2-scsimap/drivers/scsi/sr.c Thu Jun 20 02:03:21 2002
@@ -71,6 +71,8 @@
static int sr_init_command(Scsi_Cmnd *);
+static int sr_find_kdev(Scsi_Device*, char*, kdev_t*);
+
static struct Scsi_Device_Template sr_template =
{
module:THIS_MODULE,
@@ -84,7 +86,8 @@
finish:sr_finish,
attach:sr_attach,
detach:sr_detach,
- init_command:sr_init_command
+ init_command:sr_init_command,
+ find_kdev:sr_find_kdev,
};
Scsi_CD *scsi_CDs;
@@ -471,6 +474,23 @@
return 0;
}
+static int sr_find_kdev(Scsi_Device *sdp, char* nm, kdev_t *dev)
+{
+ Scsi_CD *srp;
+ int i;
+
+ if (sdp && (sdp->type == TYPE_ROM || sdp->type == TYPE_WORM)) {
+ for (srp = scsi_CDs, i = 0; i < sr_template.dev_max;
+ ++i, ++srp) {
+ if (srp->device == sdp) {
+ sprintf(nm, "sr%i", i);
+ *dev = mk_kdev(SCSI_CDROM_MAJOR,i);
+ return 0;
+ }
+ }
+ }
+ return 1;
+}
void get_sectorsize(int i)
{
diff -uNr linux-2.5.23-dj2/drivers/scsi/st.c linux-2.5.23-dj2-scsimap/drivers/scsi/st.c
--- linux-2.5.23-dj2/drivers/scsi/st.c Wed Jun 19 04:11:56 2002
+++ linux-2.5.23-dj2-scsimap/drivers/scsi/st.c Thu Jun 20 02:03:21 2002
@@ -148,6 +148,7 @@
static int st_attach(Scsi_Device *);
static int st_detect(Scsi_Device *);
static void st_detach(Scsi_Device *);
+static int st_find_kdev(Scsi_Device*, char*, kdev_t*);
static struct Scsi_Device_Template st_template = {
module: THIS_MODULE,
@@ -157,7 +158,8 @@
major: SCSI_TAPE_MAJOR,
detect: st_detect,
attach: st_attach,
- detach: st_detach
+ detach: st_detach,
+ find_kdev: st_find_kdev
};
static int st_compression(Scsi_Tape *, int);
@@ -3760,6 +3762,24 @@
return;
}
+static int st_find_kdev(Scsi_Device * sdp, char* nm, kdev_t *dev)
+{
+ int i;
+ Scsi_Tape *stp;
+
+ if (sdp && sdp->type == TYPE_TAPE && !st_incompatible(sdp)) {
+ for (stp = scsi_tapes[0], i = 0; i < st_template.dev_max;
+ stp = scsi_tapes[++i]) {
+ if (stp && stp->device == sdp) {
+ sprintf(nm, "st%i", i);
+ *dev = mk_kdev(SCSI_TAPE_MAJOR, i);
+ return 0;
+ }
+ }
+ }
+ return 1;
+}
+
static int __init init_st(void)
{
validate_options();
-- Kurt Garloff <kurt@garloff.de> [Eindhoven, NL] Physics: Plasma simulations <K.Garloff@TUE.NL> [TU Eindhoven, NL] Linux: SCSI, Security <garloff@suse.de> [SuSE Nuernberg, DE] (See mail header or public key servers for PGP2 and GPG public keys.) - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sun Jun 23 2002 - 22:00:20 EST