Mark is off climbing Mt. Hood, so he asked me to post the data on the fsync
patch.
It appears from these results that there is no appreciable improvement using
the
fsync patch - there is a slight loss of top end on 4 adapters 1 drive.
It's worthnoting that these numbers are a definite improvement over
generic 2.4.18.
Something has been done right in 2.4.19rc1. I included an excerpt of the
data that Mark
posted for 2.4.18 at the end of this email.
As to scaling - well it scales in reverse. Two adapters from one to three
drives
is scaling in the right direction. From then on it's in decline.
Here's the data.
The system is a dual PCI/66 box with 4 good SCSI cards with up to 6
15KRPM ST318452LC drives per card. (dual 1.2Ghz Pentium 3 with 2 Gig RAM
running kernels high mem support == OFF )
http://www.intel.com/design/servers/scb2/index.htm?iid=ipp_browse+motherbd_s
cb2&
http://www.adaptec.com/worldwide/product/proddetail.html?sess=no&prodkey=ASC
-39160&cat=Products
The benchmark we are using is bonnie++ version 1.02
http://www.coker.com.au/bonnie++
Running on 2.4.19rc1 base 8KB writes to a 1GB file on an
ext2 filesystem:
2 adapters (on separate PCI buses)
Drives per card Total system throughput EXT2
1 105983 KB/sec
2 179214 KB/sec
3 180237 KB/sec
4 178795 KB/sec
5 175484 KB/sec
6 172903 KB/sec
4 adapters
Drives per card Total system throughput EXT2
1 184150 KB/sec
2 165774 KB/sec
3 160775 KB/sec
4 158326 KB/sec
5 157291 KB/sec
6 155901 KB/sec
=== === === === === ===
Running on 2.4.19rc1 with the fsync patch:
2 adapters (on separate PCI buses)
Drives per card Total system throughput EXT2
1 107940 KB/sec
2 176749 KB/sec
3 181073 KB/sec
4 177064 KB/sec
5 175080 KB/sec
6 173583 KB/sec
4 adapters
Drives per card Total system throughput EXT2
1 176876 KB/sec
2 164800 KB/sec
3 161371 KB/sec
4 158792 KB/sec
5 156509 KB/sec
6 155913 KB/sec
----------------------------------------------------------------------------
----------------------------------------
Mark's original data on 2.4.18:
> Running on 2.4.18 base, 8KB writes to 300MB files I get the following data
> when run on the ext 2 file system.
>
> 2 adapters (on separate PCI buses)
> Drives per card Total system throughput EXT2 EXT3
> 1 73357 KB/sec 92095
KB/sec
> 2 115953 KB/sec 110956
KB/sec
> 3 132176 KB/sec
> 4 139578 KB/sec
> 5 139085 KB/sec
> 6 140033 KB/sec 106883
KB/sec
>
> 4 adapters
> Drives per card Total system throughput EXT2 EXT3
> 1 125282 KB/sec 121125
KB/sec
> 2 146632 KB/sec 117575
KB/sec
> 3 146622 KB/sec
> 4 142472 KB/sec
> 5 142560 KB/sec
> 6 138835 KB/sec 116570
KB/sec
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Mon Jul 15 2002 - 22:00:24 EST