Re: [PATCH]: scheduler complex macros fixes

From: Ingo Molnar (mingo@elte.hu)
Date: Sat Jul 20 2002 - 12:43:38 EST


On Fri, 19 Jul 2002, Linus Torvalds wrote:

> So I'd rather have the non-batch stuff done first and independently.

sure - all the non-batch bits are attached, against 2.5.26-vanilla. It
compiles & boots just fine on UP & SMP as well.

        Ingo

--- linux/include/linux/sched.h.orig Fri Jul 19 19:31:31 2002
+++ linux/include/linux/sched.h Fri Jul 19 19:38:48 2002
@@ -116,10 +116,11 @@
 /*
  * Scheduling policies
  */
-#define SCHED_OTHER 0
+#define SCHED_NORMAL 0
 #define SCHED_FIFO 1
 #define SCHED_RR 2
 
+
 struct sched_param {
         int sched_priority;
 };
@@ -207,7 +209,7 @@
 
 /*
  * Priority of a process goes from 0..MAX_PRIO-1, valid RT
- * priority is 0..MAX_RT_PRIO-1, and SCHED_OTHER tasks are
+ * priority is 0..MAX_RT_PRIO-1, and SCHED_NORMAL tasks are
  * in the range MAX_RT_PRIO..MAX_PRIO-1. Priority values
  * are inverted: lower p->prio value means higher priority.
  *
@@ -264,7 +266,7 @@
 
         unsigned long policy;
         unsigned long cpus_allowed;
- unsigned int time_slice;
+ unsigned int time_slice, first_time_slice;
 
         struct list_head tasks;
 
@@ -359,6 +361,8 @@
            u32 self_exec_id;
 /* Protection of (de-)allocation: mm, files, fs, tty */
         spinlock_t alloc_lock;
+/* context-switch lock */
+ spinlock_t switch_lock;
 
 /* journalling filesystem info */
         void *journal_info;
@@ -391,6 +395,7 @@
 #define PF_IOTHREAD 0x00020000 /* this thread is needed for doing I/O to swap */
 #define PF_FROZEN 0x00040000 /* frozen for system suspend */
 #define PF_INVALIDATE 0x00080000 /* debug: unmounting an fs. killme. */
+
 /*
  * Ptrace flags
  */
--- linux/include/linux/init_task.h.orig Sun Jun 9 07:27:21 2002
+++ linux/include/linux/init_task.h Fri Jul 19 19:38:48 2002
@@ -47,7 +47,7 @@
     lock_depth: -1, \
     prio: MAX_PRIO-20, \
     static_prio: MAX_PRIO-20, \
- policy: SCHED_OTHER, \
+ policy: SCHED_NORMAL, \
     cpus_allowed: -1, \
     mm: NULL, \
     active_mm: &init_mm, \
@@ -78,6 +78,7 @@
     pending: { NULL, &tsk.pending.head, {{0}}}, \
     blocked: {{0}}, \
     alloc_lock: SPIN_LOCK_UNLOCKED, \
+ switch_lock: SPIN_LOCK_UNLOCKED, \
     journal_info: NULL, \
 }
 
--- linux/include/asm-x86_64/system.h.orig Fri Jul 19 19:31:28 2002
+++ linux/include/asm-x86_64/system.h Fri Jul 19 19:38:48 2002
@@ -13,11 +13,6 @@
 #define LOCK_PREFIX ""
 #endif
 
-#define prepare_arch_schedule(prev) do { } while(0)
-#define finish_arch_schedule(prev) do { } while(0)
-#define prepare_arch_switch(rq) do { } while(0)
-#define finish_arch_switch(rq) spin_unlock_irq(&(rq)->lock)
-
 #define __STR(x) #x
 #define STR(x) __STR(x)
 
--- linux/include/asm-ppc/system.h.orig Fri Jul 19 19:31:30 2002
+++ linux/include/asm-ppc/system.h Fri Jul 19 19:38:48 2002
@@ -83,11 +83,6 @@
 struct device_node;
 extern void note_scsi_host(struct device_node *, void *);
 
-#define prepare_arch_schedule(prev) do { } while(0)
-#define finish_arch_schedule(prev) do { } while(0)
-#define prepare_arch_switch(rq) do { } while(0)
-#define finish_arch_switch(rq) spin_unlock_irq(&(rq)->lock)
-
 struct task_struct;
 extern void __switch_to(struct task_struct *, struct task_struct *);
 #define switch_to(prev, next, last) __switch_to((prev), (next))
--- linux/include/asm-s390x/system.h.orig Fri Jul 19 19:31:28 2002
+++ linux/include/asm-s390x/system.h Fri Jul 19 19:38:48 2002
@@ -18,11 +18,6 @@
 #endif
 #include <linux/kernel.h>
 
-#define prepare_arch_schedule(prev) do { } while (0)
-#define finish_arch_schedule(prev) do { } while (0)
-#define prepare_arch_switch(rq) do { } while (0)
-#define finish_arch_switch(rq) spin_unlock_irq(&(rq)->lock)
-
 #define switch_to(prev,next),last do { \
         if (prev == next) \
                 break; \
--- linux/include/asm-s390/system.h.orig Fri Jul 19 19:31:28 2002
+++ linux/include/asm-s390/system.h Fri Jul 19 19:38:48 2002
@@ -18,11 +18,6 @@
 #endif
 #include <linux/kernel.h>
 
-#define prepare_arch_schedule(prev) do { } while (0)
-#define finish_arch_schedule(prev) do { } while (0)
-#define prepare_arch_switch(rq) do { } while (0)
-#define finish_arch_switch(rq) spin_unlock_irq(&(rq)->lock)
-
 #define switch_to(prev,next,last) do { \
         if (prev == next) \
                 break; \
--- linux/include/asm-sparc64/system.h.orig Fri Jul 19 19:31:28 2002
+++ linux/include/asm-sparc64/system.h Fri Jul 19 19:38:48 2002
@@ -144,13 +144,15 @@
 #define flush_user_windows flushw_user
 #define flush_register_windows flushw_all
 
-#define prepare_arch_schedule(prev) task_lock(prev)
-#define finish_arch_schedule(prev) task_unlock(prev)
-#define prepare_arch_switch(rq) \
-do { spin_unlock(&(rq)->lock); \
- flushw_all(); \
+#define prepare_arch_switch(rq, next) \
+do { spin_lock(&(next)->switch_lock); \
+ spin_unlock(&(rq)->lock); \
+ flushw_all(); \
+} while (0)
+
+#define finish_arch_switch(rq, prev) \
+do { spin_unlock_irq(&(prev)->switch_lock); \
 } while (0)
-#define finish_arch_switch(rq) __sti()
 
 #ifndef CONFIG_DEBUG_SPINLOCK
 #define CHECK_LOCKS(PREV) do { } while(0)
--- linux/include/asm-i386/system.h.orig Fri Jul 19 19:31:27 2002
+++ linux/include/asm-i386/system.h Fri Jul 19 19:38:48 2002
@@ -11,11 +11,6 @@
 struct task_struct; /* one of the stranger aspects of C forward declarations.. */
 extern void FASTCALL(__switch_to(struct task_struct *prev, struct task_struct *next));
 
-#define prepare_arch_schedule(prev) do { } while(0)
-#define finish_arch_schedule(prev) do { } while(0)
-#define prepare_arch_switch(rq) do { } while(0)
-#define finish_arch_switch(rq) spin_unlock_irq(&(rq)->lock)
-
 #define switch_to(prev,next,last) do { \
         asm volatile("pushl %%esi\n\t" \
                      "pushl %%edi\n\t" \
--- linux/kernel/timer.c.orig Fri Jul 19 19:31:30 2002
+++ linux/kernel/timer.c Fri Jul 19 19:38:48 2002
@@ -888,7 +888,7 @@
 
 
         if (t.tv_sec == 0 && t.tv_nsec <= 2000000L &&
- current->policy != SCHED_OTHER)
+ current->policy != SCHED_NORMAL)
         {
                 /*
                  * Short delay requests up to 2 ms will be handled with
--- linux/kernel/fork.c.orig Fri Jul 19 19:31:30 2002
+++ linux/kernel/fork.c Fri Jul 19 19:38:48 2002
@@ -615,7 +615,6 @@
                             unsigned long stack_size)
 {
         int retval;
- unsigned long flags;
         struct task_struct *p = NULL;
         struct completion vfork;
 
@@ -675,6 +674,7 @@
                 init_completion(&vfork);
         }
         spin_lock_init(&p->alloc_lock);
+ spin_lock_init(&p->switch_lock);
 
         clear_tsk_thread_flag(p,TIF_SIGPENDING);
         init_sigpending(&p->pending);
@@ -737,9 +737,13 @@
          * total amount of pending timeslices in the system doesnt change,
          * resulting in more scheduling fairness.
          */
- __save_flags(flags);
         __cli();
         p->time_slice = (current->time_slice + 1) >> 1;
+ /*
+ * The remainder of the first timeslice might be recovered by
+ * the parent if the child exits early enough.
+ */
+ p->first_time_slice = 1;
         current->time_slice >>= 1;
         if (!current->time_slice) {
                 /*
@@ -751,7 +755,7 @@
                 scheduler_tick(0, 0);
         }
         p->sleep_timestamp = jiffies;
- __restore_flags(flags);
+ __sti();
 
         /*
          * Ok, add it to the run-queues and make it
--- linux/kernel/sched.c.orig Fri Jul 19 19:31:31 2002
+++ linux/kernel/sched.c Fri Jul 19 19:38:48 2002
@@ -101,7 +101,7 @@
         ((p)->prio <= (p)->static_prio - DELTA(p))
 
 /*
- * TASK_TIMESLICE scales user-nice values [ -20 ... 19 ]
+ * BASE_TIMESLICE scales user-nice values [ -20 ... 19 ]
  * to time slice values.
  *
  * The higher a process's priority, the bigger timeslices
@@ -109,8 +109,13 @@
  * priority process gets MIN_TIMESLICE worth of execution time.
  */
 
-#define TASK_TIMESLICE(p) (MIN_TIMESLICE + \
- ((MAX_TIMESLICE - MIN_TIMESLICE) * (MAX_PRIO-1-(p)->static_prio)/39))
+#define BASE_TIMESLICE(p) (MIN_TIMESLICE + \
+ ((MAX_TIMESLICE - MIN_TIMESLICE) * (MAX_PRIO-1-(p)->static_prio)/(MAX_USER_PRIO - 1)))
+
+static inline unsigned int task_timeslice(task_t *p)
+{
+ return BASE_TIMESLICE(p);
+}
 
 /*
  * These are the runqueue data structures:
@@ -135,13 +140,15 @@
  */
 struct runqueue {
         spinlock_t lock;
- unsigned long nr_running, nr_switches, expired_timestamp;
- signed long nr_uninterruptible;
+ unsigned long nr_running, nr_switches, expired_timestamp,
+ nr_uninterruptible;
         task_t *curr, *idle;
         prio_array_t *active, *expired, arrays[2];
         int prev_nr_running[NR_CPUS];
+
         task_t *migration_thread;
         list_t migration_queue;
+
 } ____cacheline_aligned;
 
 static struct runqueue runqueues[NR_CPUS] __cacheline_aligned;
@@ -153,6 +160,15 @@
 #define rt_task(p) ((p)->prio < MAX_RT_PRIO)
 
 /*
+ * Default context-switch locking:
+ */
+#ifndef prepare_arch_switch
+# define prepare_arch_switch(rq, next) do { } while(0)
+# define finish_arch_switch(rq, next) spin_unlock_irq(&(rq)->lock)
+# define task_running(rq, p) ((rq)->curr == (p))
+#endif
+
+/*
  * task_rq_lock - lock the runqueue a given task resides on and disable
  * interrupts. Note the ordering: we can safely lookup the task_rq without
  * explicitly disabling preemption.
@@ -306,7 +322,7 @@
 repeat:
         preempt_disable();
         rq = task_rq(p);
- if (unlikely(rq->curr == p)) {
+ if (unlikely(task_running(rq, p))) {
                 cpu_relax();
                 /*
                  * enable/disable preemption just to make this
@@ -317,7 +333,7 @@
                 goto repeat;
         }
         rq = task_rq_lock(p, &flags);
- if (unlikely(rq->curr == p)) {
+ if (unlikely(task_running(rq, p))) {
                 task_rq_unlock(rq, &flags);
                 preempt_enable();
                 goto repeat;
@@ -325,6 +341,7 @@
         task_rq_unlock(rq, &flags);
         preempt_enable();
 }
+#endif
 
 /*
  * Kick the remote CPU if the task is running currently,
@@ -337,10 +354,9 @@
  */
 void kick_if_running(task_t * p)
 {
- if (p == task_rq(p)->curr)
+ if ((task_running(task_rq(p), p)) && (p->thread_info->cpu != smp_processor_id()))
                 resched_task(p);
 }
-#endif
 
 /*
  * Wake up a process. Put it on the run-queue if it's not
@@ -349,6 +365,8 @@
  * progress), and as such you're allowed to do the simpler
  * "current->state = TASK_RUNNING" to mark yourself runnable
  * without the overhead of this.
+ *
+ * returns failure only if the task is already active.
  */
 static int try_to_wake_up(task_t * p, int sync)
 {
@@ -365,7 +383,7 @@
                  * Fast-migrate the task if it's not running or runnable
                  * currently. Do not violate hard affinity.
                  */
- if (unlikely(sync && (rq->curr != p) &&
+ if (unlikely(sync && !task_running(rq, p) &&
                         (task_cpu(p) != smp_processor_id()) &&
                         (p->cpus_allowed & (1UL << smp_processor_id())))) {
 
@@ -376,9 +394,7 @@
                 if (old_state == TASK_UNINTERRUPTIBLE)
                         rq->nr_uninterruptible--;
                 activate_task(p, rq);
- /*
- * If sync is set, a resched_task() is a NOOP
- */
+
                 if (p->prio < rq->curr->prio)
                         resched_task(rq->curr);
                 success = 1;
@@ -427,9 +443,11 @@
 void sched_exit(task_t * p)
 {
         __cli();
- current->time_slice += p->time_slice;
- if (unlikely(current->time_slice > MAX_TIMESLICE))
- current->time_slice = MAX_TIMESLICE;
+ if (p->first_time_slice) {
+ current->time_slice += p->time_slice;
+ if (unlikely(current->time_slice > MAX_TIMESLICE))
+ current->time_slice = MAX_TIMESLICE;
+ }
         __sti();
         /*
          * If the child was a (relative-) CPU hog then decrease
@@ -443,8 +461,7 @@
 #if CONFIG_SMP || CONFIG_PREEMPT
 asmlinkage void schedule_tail(task_t *prev)
 {
- finish_arch_switch(this_rq());
- finish_arch_schedule(prev);
+ finish_arch_switch(this_rq(), prev);
 }
 #endif
 
@@ -501,7 +518,42 @@
         return sum;
 }
 
+/*
+ * double_rq_lock - safely lock two runqueues
+ *
+ * Note this does not disable interrupts like task_rq_lock,
+ * you need to do so manually before calling.
+ */
+static inline void double_rq_lock(runqueue_t *rq1, runqueue_t *rq2)
+{
+ if (rq1 == rq2)
+ spin_lock(&rq1->lock);
+ else {
+ if (rq1 < rq2) {
+ spin_lock(&rq1->lock);
+ spin_lock(&rq2->lock);
+ } else {
+ spin_lock(&rq2->lock);
+ spin_lock(&rq1->lock);
+ }
+ }
+}
+
+/*
+ * double_rq_unlock - safely unlock two runqueues
+ *
+ * Note this does not restore interrupts like task_rq_unlock,
+ * you need to do so manually after calling.
+ */
+static inline void double_rq_unlock(runqueue_t *rq1, runqueue_t *rq2)
+{
+ spin_unlock(&rq1->lock);
+ if (rq1 != rq2)
+ spin_unlock(&rq2->lock);
+}
+
 #if CONFIG_SMP
+
 /*
  * Lock the busiest runqueue as well, this_rq is locked already.
  * Recalculate nr_running if we have to drop the runqueue lock.
@@ -525,22 +577,10 @@
         return nr_running;
 }
 
-/*
- * Current runqueue is empty, or rebalance tick: if there is an
- * inbalance (current runqueue is too short) then pull from
- * busiest runqueue(s).
- *
- * We call this with the current runqueue locked,
- * irqs disabled.
- */
-static void load_balance(runqueue_t *this_rq, int idle)
+static inline runqueue_t *find_busiest_queue(runqueue_t *this_rq, int this_cpu, int idle, int *imbalance)
 {
- int imbalance, nr_running, load, max_load,
- idx, i, this_cpu = smp_processor_id();
- task_t *next = this_rq->idle, *tmp;
+ int nr_running, load, max_load, i;
         runqueue_t *busiest, *rq_src;
- prio_array_t *array;
- list_t *head, *curr;
 
         /*
          * We search all runqueues to find the most busy one.
@@ -589,21 +629,67 @@
         }
 
         if (likely(!busiest))
- return;
+ goto out;
 
- imbalance = (max_load - nr_running) / 2;
+ *imbalance = (max_load - nr_running) / 2;
 
         /* It needs an at least ~25% imbalance to trigger balancing. */
- if (!idle && (imbalance < (max_load + 3)/4))
- return;
+ if (!idle && (*imbalance < (max_load + 3)/4)) {
+ busiest = NULL;
+ goto out;
+ }
 
         nr_running = double_lock_balance(this_rq, busiest, this_cpu, idle, nr_running);
         /*
          * Make sure nothing changed since we checked the
          * runqueue length.
          */
- if (busiest->nr_running <= nr_running + 1)
- goto out_unlock;
+ if (busiest->nr_running <= nr_running + 1) {
+ spin_unlock(&busiest->lock);
+ busiest = NULL;
+ }
+out:
+ return busiest;
+}
+
+/*
+ * Move a task from a remote runqueue to the local runqueue.
+ * Both runqueues must be locked.
+ */
+static inline void pull_task(runqueue_t *src_rq, prio_array_t *src_array, task_t *p, runqueue_t *this_rq, int this_cpu)
+{
+ dequeue_task(p, src_array);
+ src_rq->nr_running--;
+ set_task_cpu(p, this_cpu);
+ this_rq->nr_running++;
+ enqueue_task(p, this_rq->active);
+ /*
+ * Note that idle threads have a prio of MAX_PRIO, for this test
+ * to be always true for them.
+ */
+ if (p->prio < this_rq->curr->prio)
+ set_need_resched();
+}
+
+/*
+ * Current runqueue is empty, or rebalance tick: if there is an
+ * inbalance (current runqueue is too short) then pull from
+ * busiest runqueue(s).
+ *
+ * We call this with the current runqueue locked,
+ * irqs disabled.
+ */
+static void load_balance(runqueue_t *this_rq, int idle)
+{
+ int imbalance, idx, this_cpu = smp_processor_id();
+ runqueue_t *busiest;
+ prio_array_t *array;
+ list_t *head, *curr;
+ task_t *tmp;
+
+ busiest = find_busiest_queue(this_rq, this_cpu, idle, &imbalance);
+ if (!busiest)
+ goto out;
 
         /*
          * We first consider expired tasks. Those will likely not be
@@ -646,36 +732,27 @@
 
 #define CAN_MIGRATE_TASK(p,rq,this_cpu) \
         ((jiffies - (p)->sleep_timestamp > cache_decay_ticks) && \
- ((p) != (rq)->curr) && \
+ !task_running(rq, p) && \
                         ((p)->cpus_allowed & (1UL << (this_cpu))))
 
+ curr = curr->prev;
+
         if (!CAN_MIGRATE_TASK(tmp, busiest, this_cpu)) {
- curr = curr->next;
                 if (curr != head)
                         goto skip_queue;
                 idx++;
                 goto skip_bitmap;
         }
- next = tmp;
- /*
- * take the task out of the other runqueue and
- * put it into this one:
- */
- dequeue_task(next, array);
- busiest->nr_running--;
- set_task_cpu(next, this_cpu);
- this_rq->nr_running++;
- enqueue_task(next, this_rq->active);
- if (next->prio < current->prio)
- set_need_resched();
+ pull_task(busiest, array, tmp, this_rq, this_cpu);
         if (!idle && --imbalance) {
- if (array == busiest->expired) {
- array = busiest->active;
- goto new_array;
- }
+ if (curr != head)
+ goto skip_queue;
+ idx++;
+ goto skip_bitmap;
         }
 out_unlock:
         spin_unlock(&busiest->lock);
+out:
 }
 
 /*
@@ -690,13 +767,13 @@
 #define BUSY_REBALANCE_TICK (HZ/4 ?: 1)
 #define IDLE_REBALANCE_TICK (HZ/1000 ?: 1)
 
-static inline void idle_tick(void)
+static inline void idle_tick(runqueue_t *rq)
 {
         if (jiffies % IDLE_REBALANCE_TICK)
                 return;
- spin_lock(&this_rq()->lock);
- load_balance(this_rq(), 1);
- spin_unlock(&this_rq()->lock);
+ spin_lock(&rq->lock);
+ load_balance(rq, 1);
+ spin_unlock(&rq->lock);
 }
 
 #endif
@@ -719,7 +796,7 @@
  * This function gets called by the timer code, with HZ frequency.
  * We call it with interrupts disabled.
  */
-void scheduler_tick(int user_tick, int system)
+void scheduler_tick(int user_ticks, int sys_ticks)
 {
         int cpu = smp_processor_id();
         runqueue_t *rq = this_rq();
@@ -727,17 +804,17 @@
 
         if (p == rq->idle) {
                 if (local_bh_count(cpu) || local_irq_count(cpu) > 1)
- kstat.per_cpu_system[cpu] += system;
+ kstat.per_cpu_system[cpu] += sys_ticks;
 #if CONFIG_SMP
- idle_tick();
+ idle_tick(rq);
 #endif
                 return;
         }
         if (TASK_NICE(p) > 0)
- kstat.per_cpu_nice[cpu] += user_tick;
+ kstat.per_cpu_nice[cpu] += user_ticks;
         else
- kstat.per_cpu_user[cpu] += user_tick;
- kstat.per_cpu_system[cpu] += system;
+ kstat.per_cpu_user[cpu] += user_ticks;
+ kstat.per_cpu_system[cpu] += sys_ticks;
 
         /* Task might have expired already, but not scheduled off yet */
         if (p->array != rq->active) {
@@ -751,7 +828,8 @@
                  * FIFO tasks have no timeslices.
                  */
                 if ((p->policy == SCHED_RR) && !--p->time_slice) {
- p->time_slice = TASK_TIMESLICE(p);
+ p->time_slice = task_timeslice(p);
+ p->first_time_slice = 0;
                         set_tsk_need_resched(p);
 
                         /* put it at the end of the queue: */
@@ -774,7 +852,8 @@
                 dequeue_task(p, rq->active);
                 set_tsk_need_resched(p);
                 p->prio = effective_prio(p);
- p->time_slice = TASK_TIMESLICE(p);
+ p->time_slice = task_timeslice(p);
+ p->first_time_slice = 0;
 
                 if (!TASK_INTERACTIVE(p) || EXPIRED_STARVING(rq)) {
                         if (!rq->expired_timestamp)
@@ -816,7 +895,6 @@
         rq = this_rq();
 
         release_kernel_lock(prev, smp_processor_id());
- prepare_arch_schedule(prev);
         prev->sleep_timestamp = jiffies;
         spin_lock_irq(&rq->lock);
 
@@ -873,14 +951,13 @@
                 rq->nr_switches++;
                 rq->curr = next;
         
- prepare_arch_switch(rq);
+ prepare_arch_switch(rq, next);
                 prev = context_switch(prev, next);
                 barrier();
                 rq = this_rq();
- finish_arch_switch(rq);
+ finish_arch_switch(rq, prev);
         } else
                 spin_unlock_irq(&rq->lock);
- finish_arch_schedule(prev);
 
         reacquire_kernel_lock(current);
         preempt_enable_no_resched();
@@ -1106,7 +1183,8 @@
                  * If the task is running and lowered its priority,
                  * or increased its priority then reschedule its CPU:
                  */
- if ((NICE_TO_PRIO(nice) < p->static_prio) || (p == rq->curr))
+ if ((NICE_TO_PRIO(nice) < p->static_prio) ||
+ task_running(rq, p))
                         resched_task(rq->curr);
         }
 out_unlock:
@@ -1214,18 +1292,18 @@
         else {
                 retval = -EINVAL;
                 if (policy != SCHED_FIFO && policy != SCHED_RR &&
- policy != SCHED_OTHER)
+ policy != SCHED_NORMAL)
                         goto out_unlock;
         }
 
         /*
          * Valid priorities for SCHED_FIFO and SCHED_RR are
- * 1..MAX_USER_RT_PRIO-1, valid priority for SCHED_OTHER is 0.
+ * 1..MAX_USER_RT_PRIO-1, valid priority for SCHED_NORMAL is 0.
          */
         retval = -EINVAL;
         if (lp.sched_priority < 0 || lp.sched_priority > MAX_USER_RT_PRIO-1)
                 goto out_unlock;
- if ((policy == SCHED_OTHER) != (lp.sched_priority == 0))
+ if ((policy == SCHED_NORMAL) != (lp.sched_priority == 0))
                 goto out_unlock;
 
         retval = -EPERM;
@@ -1242,7 +1320,7 @@
         retval = 0;
         p->policy = policy;
         p->rt_priority = lp.sched_priority;
- if (policy != SCHED_OTHER)
+ if (policy != SCHED_NORMAL)
                 p->prio = MAX_USER_RT_PRIO-1 - p->rt_priority;
         else
                 p->prio = p->static_prio;
@@ -1413,39 +1491,18 @@
         prio_array_t *array = current->array;
 
         /*
- * There are three levels of how a yielding task will give up
- * the current CPU:
+ * We implement yielding by moving the task into the expired
+ * queue.
          *
- * #1 - it decreases its priority by one. This priority loss is
- * temporary, it's recovered once the current timeslice
- * expires.
- *
- * #2 - once it has reached the lowest priority level,
- * it will give up timeslices one by one. (We do not
- * want to give them up all at once, it's gradual,
- * to protect the casual yield()er.)
- *
- * #3 - once all timeslices are gone we put the process into
- * the expired array.
- *
- * (special rule: RT tasks do not lose any priority, they just
- * roundrobin on their current priority level.)
+ * (special rule: RT tasks will just roundrobin in the active
+ * array.)
          */
- if (likely(current->prio == MAX_PRIO-1)) {
- if (current->time_slice <= 1) {
- dequeue_task(current, rq->active);
- enqueue_task(current, rq->expired);
- } else
- current->time_slice--;
- } else if (unlikely(rt_task(current))) {
- list_move_tail(&current->run_list, array->queue + current->prio);
+ if (likely(!rt_task(current))) {
+ dequeue_task(current, array);
+ enqueue_task(current, rq->expired);
         } else {
                 list_del(&current->run_list);
- if (list_empty(array->queue + current->prio))
- __clear_bit(current->prio, array->bitmap);
- current->prio++;
                 list_add_tail(&current->run_list, array->queue + current->prio);
- __set_bit(current->prio, array->bitmap);
         }
         spin_unlock_no_resched(&rq->lock);
 
@@ -1475,7 +1532,7 @@
         case SCHED_RR:
                 ret = MAX_USER_RT_PRIO-1;
                 break;
- case SCHED_OTHER:
+ case SCHED_NORMAL:
                 ret = 0;
                 break;
         }
@@ -1491,7 +1548,7 @@
         case SCHED_RR:
                 ret = 1;
                 break;
- case SCHED_OTHER:
+ case SCHED_NORMAL:
                 ret = 0;
         }
         return ret;
@@ -1511,7 +1568,7 @@
         p = find_process_by_pid(pid);
         if (p)
                 jiffies_to_timespec(p->policy & SCHED_FIFO ?
- 0 : TASK_TIMESLICE(p), &t);
+ 0 : task_timeslice(p), &t);
         read_unlock(&tasklist_lock);
         if (p)
                 retval = copy_to_user(interval, &t, sizeof(t)) ? -EFAULT : 0;
@@ -1613,40 +1670,6 @@
         read_unlock(&tasklist_lock);
 }
 
-/*
- * double_rq_lock - safely lock two runqueues
- *
- * Note this does not disable interrupts like task_rq_lock,
- * you need to do so manually before calling.
- */
-static inline void double_rq_lock(runqueue_t *rq1, runqueue_t *rq2)
-{
- if (rq1 == rq2)
- spin_lock(&rq1->lock);
- else {
- if (rq1 < rq2) {
- spin_lock(&rq1->lock);
- spin_lock(&rq2->lock);
- } else {
- spin_lock(&rq2->lock);
- spin_lock(&rq1->lock);
- }
- }
-}
-
-/*
- * double_rq_unlock - safely unlock two runqueues
- *
- * Note this does not restore interrupts like task_rq_unlock,
- * you need to do so manually after calling.
- */
-static inline void double_rq_unlock(runqueue_t *rq1, runqueue_t *rq2)
-{
- spin_unlock(&rq1->lock);
- if (rq1 != rq2)
- spin_unlock(&rq2->lock);
-}
-
 void __init init_idle(task_t *idle, int cpu)
 {
         runqueue_t *idle_rq = cpu_rq(cpu), *rq = cpu_rq(task_cpu(idle));
@@ -1670,57 +1693,6 @@
         idle->thread_info->preempt_count = (idle->lock_depth >= 0);
 }
 
-extern void init_timervecs(void);
-extern void timer_bh(void);
-extern void tqueue_bh(void);
-extern void immediate_bh(void);
-
-void __init sched_init(void)
-{
- runqueue_t *rq;
- int i, j, k;
-
- for (i = 0; i < NR_CPUS; i++) {
- prio_array_t *array;
-
- rq = cpu_rq(i);
- rq->active = rq->arrays;
- rq->expired = rq->arrays + 1;
- spin_lock_init(&rq->lock);
- INIT_LIST_HEAD(&rq->migration_queue);
-
- for (j = 0; j < 2; j++) {
- array = rq->arrays + j;
- for (k = 0; k < MAX_PRIO; k++) {
- INIT_LIST_HEAD(array->queue + k);
- __clear_bit(k, array->bitmap);
- }
- // delimiter for bitsearch
- __set_bit(MAX_PRIO, array->bitmap);
- }
- }
- /*
- * We have to do a little magic to get the first
- * process right in SMP mode.
- */
- rq = this_rq();
- rq->curr = current;
- rq->idle = current;
- set_task_cpu(current, smp_processor_id());
- wake_up_process(current);
-
- init_timervecs();
- init_bh(TIMER_BH, timer_bh);
- init_bh(TQUEUE_BH, tqueue_bh);
- init_bh(IMMEDIATE_BH, immediate_bh);
-
- /*
- * The boot idle thread does lazy MMU switching as well:
- */
- atomic_inc(&init_mm.mm_count);
- enter_lazy_tlb(&init_mm, current, smp_processor_id());
-}
-
 #if CONFIG_SMP
 
 /*
@@ -1779,7 +1751,7 @@
          * If the task is not on a runqueue (and not running), then
          * it is sufficient to simply update the task's cpu field.
          */
- if (!p->array && (p != rq->curr)) {
+ if (!p->array && !task_running(rq, p)) {
                 set_task_cpu(p, __ffs(p->cpus_allowed));
                 task_rq_unlock(rq, &flags);
                 goto out;
@@ -1897,3 +1869,55 @@
         }
 }
 #endif
+
+extern void init_timervecs(void);
+extern void timer_bh(void);
+extern void tqueue_bh(void);
+extern void immediate_bh(void);
+
+void __init sched_init(void)
+{
+ runqueue_t *rq;
+ int i, j, k;
+
+ for (i = 0; i < NR_CPUS; i++) {
+ prio_array_t *array;
+
+ rq = cpu_rq(i);
+ rq->active = rq->arrays;
+ rq->expired = rq->arrays + 1;
+ spin_lock_init(&rq->lock);
+ INIT_LIST_HEAD(&rq->migration_queue);
+
+ for (j = 0; j < 2; j++) {
+ array = rq->arrays + j;
+ for (k = 0; k < MAX_PRIO; k++) {
+ INIT_LIST_HEAD(array->queue + k);
+ __clear_bit(k, array->bitmap);
+ }
+ // delimiter for bitsearch
+ __set_bit(MAX_PRIO, array->bitmap);
+ }
+ }
+ /*
+ * We have to do a little magic to get the first
+ * process right in SMP mode.
+ */
+ rq = this_rq();
+ rq->curr = current;
+ rq->idle = current;
+ set_task_cpu(current, smp_processor_id());
+ wake_up_process(current);
+
+ init_timervecs();
+ init_bh(TIMER_BH, timer_bh);
+ init_bh(TQUEUE_BH, tqueue_bh);
+ init_bh(IMMEDIATE_BH, immediate_bh);
+
+ /*
+ * The boot idle thread does lazy MMU switching as well:
+ */
+ atomic_inc(&init_mm.mm_count);
+ enter_lazy_tlb(&init_mm, current, smp_processor_id());
+}
+
--- linux/kernel/signal.c.orig Fri Jul 19 19:31:30 2002
+++ linux/kernel/signal.c Fri Jul 19 19:38:48 2002
@@ -500,7 +500,6 @@
 {
         set_tsk_thread_flag(t,TIF_SIGPENDING);
 
-#ifdef CONFIG_SMP
         /*
          * If the task is running on a different CPU
          * force a reschedule on the other CPU to make
@@ -511,9 +510,8 @@
          * process of changing - but no harm is done by that
          * other than doing an extra (lightweight) IPI interrupt.
          */
- if ((t->state == TASK_RUNNING) && (t->thread_info->cpu != smp_processor_id()))
+ if (t->state == TASK_RUNNING)
                 kick_if_running(t);
-#endif
         if (t->state & TASK_INTERRUPTIBLE) {
                 wake_up_process(t);
                 return;
--- linux/kernel/exit.c.orig Fri Jul 19 19:31:30 2002
+++ linux/kernel/exit.c Fri Jul 19 19:38:48 2002
@@ -182,7 +182,7 @@
         current->exit_signal = SIGCHLD;
 
         current->ptrace = 0;
- if ((current->policy == SCHED_OTHER) && (task_nice(current) < 0))
+ if ((current->policy == SCHED_NORMAL) && (task_nice(current) < 0))
                 set_user_nice(current, 0);
         /* cpus_allowed? */
         /* rt_priority? */
 

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Tue Jul 23 2002 - 22:00:31 EST