It looks like a fresh bug was recently introduced. Every other boot
my NUMA-Q testboxen deadlock just after a serial console printk() about
speed change or something on that order. It occurs nondeterministically
after userspace has run for a short while, during init scripts.
My current set of NUMA-Q workarounds follows as a combined diff (yes,
Martin, I know they're not what you'd like to merge but they should be
equivalent in functionality so far as fixing bootup problems goes).
rmk, I've cc:'d you in the hopes that some unmerged serial fix will
magically materialize.
Cheers,
Bill
===== arch/i386/config.in 1.42 vs edited =====
--- 1.42/arch/i386/config.in Fri Jul 19 16:00:55 2002
+++ edited/arch/i386/config.in Mon Jul 22 22:44:41 2002
@@ -165,7 +165,9 @@
define_bool CONFIG_X86_IO_APIC y
fi
else
- bool 'Multiquad NUMA system' CONFIG_MULTIQUAD
+ if [ "$CONFIG_PREEMPT" != "y" ]; then
+ bool 'Multiquad NUMA system' CONFIG_MULTIQUAD
+ fi
fi
bool 'Machine Check Exception' CONFIG_X86_MCE
===== arch/i386/vmlinux.lds 1.9 vs edited =====
--- 1.9/arch/i386/vmlinux.lds Sun May 19 12:03:14 2002
+++ edited/arch/i386/vmlinux.lds Mon Jul 22 22:49:39 2002
@@ -84,11 +84,13 @@
_end = . ;
/* Sections to be discarded */
+ /*
/DISCARD/ : {
*(.text.exit)
*(.data.exit)
*(.exitcall.exit)
}
+ */
/* Stabs debugging sections. */
.stab 0 : { *(.stab) }
===== arch/i386/kernel/io_apic.c 1.23 vs edited =====
--- 1.23/arch/i386/kernel/io_apic.c Sun Jul 21 09:09:17 2002
+++ edited/arch/i386/kernel/io_apic.c Mon Jul 22 22:44:41 2002
@@ -219,7 +219,7 @@
#define IRQ_ALLOWED(cpu,allowed_mask) \
((1 << cpu) & (allowed_mask))
-#if CONFIG_SMP
+#if CONFIG_SMP && !CONFIG_MULTIQUAD
static unsigned long move(int curr_cpu, unsigned long allowed_mask, unsigned long now, int direction)
{
int search_idle = 1;
===== arch/i386/kernel/smp.c 1.18 vs edited =====
--- 1.18/arch/i386/kernel/smp.c Mon Jul 15 10:03:02 2002
+++ edited/arch/i386/kernel/smp.c Mon Jul 22 22:44:41 2002
@@ -569,7 +569,7 @@
struct call_data_struct data;
int cpus = num_online_cpus()-1;
- if (!cpus)
+ if (cpus <= 0)
return 0;
data.func = func;
===== arch/i386/kernel/cpu/common.c 1.2 vs edited =====
--- 1.2/arch/i386/kernel/cpu/common.c Mon Jul 15 10:03:21 2002
+++ edited/arch/i386/kernel/cpu/common.c Mon Jul 22 22:44:41 2002
@@ -444,6 +444,8 @@
__asm__ __volatile__("lgdt %0": "=m" (gdt_descr));
__asm__ __volatile__("lidt %0": "=m" (idt_descr));
+ printk(KERN_INFO "Loading GDT/IDT for CPU#%d\n", nr);
+
/*
* Delete NT
*/
@@ -464,6 +466,8 @@
load_TR(nr);
load_LDT(&init_mm.context);
+ printk(KERN_INFO "Loaded per-cpu LDT/TSS for CPU#%d\n", nr);
+
/* Clear %fs and %gs. */
asm volatile ("xorl %eax, %eax; movl %eax, %fs; movl %eax, %gs");
@@ -481,4 +485,6 @@
clear_thread_flag(TIF_USEDFPU);
current->used_math = 0;
stts();
+
+ printk(KERN_INFO "Cleaned up FPU and debug regs for CPU#%d\n", nr);
}
===== drivers/net/tulip/de2104x.c 1.5 vs edited =====
--- 1.5/drivers/net/tulip/de2104x.c Thu Mar 7 01:42:39 2002
+++ edited/drivers/net/tulip/de2104x.c Mon Jul 22 22:47:20 2002
@@ -1455,7 +1455,7 @@
/* Update the error counts. */
__de_get_stats(de);
- synchronize_irq();
+ synchronize_irq(dev->irq);
de_clean_rings(de);
de_init_hw(de);
===== drivers/scsi/qlogicisp.c 1.11 vs edited =====
--- 1.11/drivers/scsi/qlogicisp.c Sun Jul 21 01:55:49 2002
+++ edited/drivers/scsi/qlogicisp.c Mon Jul 22 22:49:12 2002
@@ -84,14 +84,13 @@
{ \
unsigned long flags; \
\
- save_flags(flags); \
- cli(); \
+ local_irq_save(flags); \
trace.buf[trace.next].name = (w); \
trace.buf[trace.next].time = jiffies; \
trace.buf[trace.next].index = (i); \
trace.buf[trace.next].addr = (long) (a); \
trace.next = (trace.next + 1) & (TRACE_BUF_LEN - 1); \
- restore_flags(flags); \
+ local_irq_restore(flags); \
}
#else
@@ -1704,8 +1703,7 @@
ENTER("isp1020_load_parameters");
- save_flags(flags);
- cli();
+ local_irq_save(flags);
hwrev = isp_inw(host, ISP_CFG0) & ISP_CFG0_HWMSK;
isp_cfg1 = ISP_CFG1_F64 | ISP_CFG1_BENAB;
@@ -1724,7 +1722,7 @@
isp1020_mbox_command(host, param);
if (param[0] != MBOX_COMMAND_COMPLETE) {
- restore_flags(flags);
+ local_irq_restore(flags);
printk("qlogicisp : set initiator id failure\n");
return 1;
}
@@ -1736,7 +1734,7 @@
isp1020_mbox_command(host, param);
if (param[0] != MBOX_COMMAND_COMPLETE) {
- restore_flags(flags);
+ local_irq_restore(flags);
printk("qlogicisp : set retry count failure\n");
return 1;
}
@@ -1747,7 +1745,7 @@
isp1020_mbox_command(host, param);
if (param[0] != MBOX_COMMAND_COMPLETE) {
- restore_flags(flags);
+ local_irq_restore(flags);
printk("qlogicisp : async data setup time failure\n");
return 1;
}
@@ -1759,7 +1757,7 @@
isp1020_mbox_command(host, param);
if (param[0] != MBOX_COMMAND_COMPLETE) {
- restore_flags(flags);
+ local_irq_restore(flags);
printk("qlogicisp : set active negation state failure\n");
return 1;
}
@@ -1771,7 +1769,7 @@
isp1020_mbox_command(host, param);
if (param[0] != MBOX_COMMAND_COMPLETE) {
- restore_flags(flags);
+ local_irq_restore(flags);
printk("qlogicisp : set pci control parameter failure\n");
return 1;
}
@@ -1782,7 +1780,7 @@
isp1020_mbox_command(host, param);
if (param[0] != MBOX_COMMAND_COMPLETE) {
- restore_flags(flags);
+ local_irq_restore(flags);
printk("qlogicisp : set tag age limit failure\n");
return 1;
}
@@ -1793,7 +1791,7 @@
isp1020_mbox_command(host, param);
if (param[0] != MBOX_COMMAND_COMPLETE) {
- restore_flags(flags);
+ local_irq_restore(flags);
printk("qlogicisp : set selection timeout failure\n");
return 1;
}
@@ -1812,7 +1810,7 @@
isp1020_mbox_command(host, param);
if (param[0] != MBOX_COMMAND_COMPLETE) {
- restore_flags(flags);
+ local_irq_restore(flags);
printk("qlogicisp : set target parameter failure\n");
return 1;
}
@@ -1827,7 +1825,7 @@
isp1020_mbox_command(host, param);
if (param[0] != MBOX_COMMAND_COMPLETE) {
- restore_flags(flags);
+ local_irq_restore(flags);
printk("qlogicisp : set device queue "
"parameter failure\n");
return 1;
@@ -1854,7 +1852,7 @@
isp1020_mbox_command(host, param);
if (param[0] != MBOX_COMMAND_COMPLETE) {
- restore_flags(flags);
+ local_irq_restore(flags);
printk("qlogicisp : set response queue failure\n");
return 1;
}
@@ -1879,12 +1877,12 @@
isp1020_mbox_command(host, param);
if (param[0] != MBOX_COMMAND_COMPLETE) {
- restore_flags(flags);
+ local_irq_restore(flags);
printk("qlogicisp : set request queue failure\n");
return 1;
}
- restore_flags(flags);
+ local_irq_restore(flags);
LEAVE("isp1020_load_parameters");
===== fs/mpage.c 1.11 vs edited =====
--- 1.11/fs/mpage.c Tue Jul 16 14:47:15 2002
+++ edited/fs/mpage.c Mon Jul 22 22:44:41 2002
@@ -24,7 +24,7 @@
* The largest-sized BIO which this code will assemble, in bytes. Set this
* to PAGE_CACHE_SIZE if your drivers are broken.
*/
-#define MPAGE_BIO_MAX_SIZE BIO_MAX_SIZE
+#define MPAGE_BIO_MAX_SIZE PAGE_CACHE_SIZE
/*
* I/O completion handler for multipage BIOs.
===== include/asm-i386/apicdef.h 1.3 vs edited =====
--- 1.3/include/asm-i386/apicdef.h Wed Mar 27 16:05:30 2002
+++ edited/include/asm-i386/apicdef.h Mon Jul 22 22:44:41 2002
@@ -108,7 +108,11 @@
#define APIC_BASE (fix_to_virt(FIX_APIC_BASE))
+#ifndef CONFIG_MULTIQUAD
#define MAX_IO_APICS 8
+#else
+#define MAX_IO_APICS 1024
+#endif /* CONFIG_MULTIQUAD */
/*
* the local APIC register structure, memory mapped. Not terribly well
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Tue Jul 23 2002 - 22:00:41 EST