Re: 2.5.31 boot failure on pdc20267

From: Mikael Pettersson (mikpe@csd.uu.se)
Date: Thu Aug 15 2002 - 15:13:09 EST


Petr Vandrovec writes:
> On 15 Aug 02 at 17:15, Mikael Pettersson wrote:
> > Booting 2.5.31 (non-bk) on hde5, a UDMA(66) Quantum Fireball
> > on a PDC20267 add-on card, resulted in a complete hang as init
> > came to its "mount -n -o remount,rw /" point. No visible messages
> > or anything in the log.
>
> Known bug. Apply IDE113 (Aug 06, 11:02 CEST, from Martin), or just open
> drivers/ide/pcidma.c in your favorite text editor, look for (first)
> #ifdef CONFIG_BLK_DEV_TRM290, and replace whole ifdef block with
> '*--table |= cpu_to_le32(0x80000000);'

Tested. First time 2.5.31 + the patch booted it seemed to work, but hung
later on while compiling a 2.4.19 kernel. No messages of any kind. The
hang _seemed_ to coincide with the console screen blanker kicking in.
Second boot went ok and I made sure the screen blanker wouldn't kick
in while doing the compile, and it didn't hang.

This box is the only one so far I've seen this problem on, my other
Intel chipset boxes actually seem to work fairly well with 2.5.31.

/Mikael
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Thu Aug 15 2002 - 22:00:40 EST