Linux version 2.4.18 (root@shannara) (gcc version 2.95.4 20011002 (Debian prerelease)) #2 Wed Aug 14 20:36:10 CEST 2002 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001ffeb000 (usable) BIOS-e820: 000000001ffeb000 - 000000001ffef000 (ACPI data) BIOS-e820: 000000001ffef000 - 000000001ffff000 (reserved) BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) On node 0 totalpages: 131051 zone(0): 4096 pages. zone(1): 126955 pages. zone(2): 0 pages. Kernel command line: BOOT_IMAGE=Linux ro root=305 reboot=warm parport=auto hdd=ide-scsi ide_setup: hdd=ide-scsi Initializing CPU#0 Detected 1005.049 MHz processor. Console: colour VGA+ 132x43 Calibrating delay loop... 2005.40 BogoMIPS Memory: 513796k/524204k available (1084k kernel code, 10020k reserved, 290k data, 216k init, 0k highmem) Dentry-cache hash table entries: 65536 (order: 7, 524288 bytes) Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) CPU: Before vendor init, caps: 0383f9ff 00000000 00000000, vendor = 0 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K CPU: After vendor init, caps: 0383f9ff 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0383f9ff 00000000 00000000 00000000 CPU: Common caps: 0383f9ff 00000000 00000000 00000000 CPU: Intel Pentium III (Coppermine) stepping 06 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel PCI: PCI BIOS revision 2.10 entry at 0xf0d90, last bus=2 PCI: Using configuration type 1 PCI: Probing PCI hardware Unknown bridge resource 0: assuming transparent PCI: Using IRQ router PIIX [8086/2440] at 00:1f.0 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16) Starting kswapd VFS: Diskquotas version dquot_6.4.0 initialized devfs: v1.10 (20020120) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP] pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A lp0: using parport0 (interrupt-driven). Real Time Clock Driver v1.10e block: 128 slots per queue, batch=32 Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller on PCI bus 00 dev f9 PIIX4: chipset revision 2 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xb800-0xb807, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xb808-0xb80f, BIOS settings: hdc:DMA, hdd:DMA hda: IBM-DTLA-307045, ATA DISK drive hdc: Pioneer DVD-ROM ATAPIModel DVD-105S 012, ATAPI CD/DVD-ROM drive hdd: PCRW804, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: 90069840 sectors (46116 MB) w/1916KiB Cache, CHS=5606/255/63 hdc: ATAPI 40X DVD-ROM drive, 512kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.12 Partition check: /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 > Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 PCI: Found IRQ 9 for device 02:0d.0 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html 02:0d.0: 3Com PCI 3c905C Tornado at 0xd000. Vers LK1.1.16 Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 439M agpgart: Detected Intel i815 chipset agpgart: AGP aperture is 64M @ 0xf8000000 SCSI subsystem driver Revision: 1.00 ppa: Version 2.07 (for Linux 2.4.x) ppa: Found device at ID 6, Attempting to use EPP 32 bit ppa: Communication established with ID 6 using EPP 32 bit scsi0 : Iomega VPI0 (ppa) interface Vendor: IOMEGA Model: ZIP 100 Rev: L.01 Type: Direct-Access ANSI SCSI revision: 02 Attached scsi removable disk sda at scsi0, channel 0, id 6, lun 0 sda : READ CAPACITY failed. sda : status = 1, message = 00, host = 0, driver = 08 Current sd00:00: sns = 70 2 ASC=3a ASCQ= 0 Raw sense data:0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x11 0x00 0x00 0x00 0x00 0x3a 0x00 0x00 0x00 0x00 0x00 0xff 0xfe 0x01 0x00 0x00 0x00 0x00 sda : block size assumed to be 512 bytes, disk size 1GB. /dev/scsi/host0/bus0/target6/lun0: I/O error: dev 08:00, sector 0 I/O error: dev 08:00, sector 0 unable to read partition table NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 32768) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (ext2 filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 216k freed Device not ready. Make sure there is a disc in the drive. VFS: Disk change detected on device 08:00 sda : READ CAPACITY failed. sda : status = 1, message = 00, host = 0, driver = 08 Current sd00:00: sns = 70 2 ASC=3a ASCQ= 0 Raw sense data:0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x11 0x00 0x00 0x00 0x00 0x3a 0x00 0x00 0x00 0x00 0x00 0xff 0xfe 0x01 0x00 0x00 0x00 0x00 sda : block size assumed to be 512 bytes, disk size 1GB. /dev/scsi/host0/bus0/target6/lun0: I/O error: dev 08:00, sector 0 I/O error: dev 08:00, sector 0 Adding Swap: 498004k swap-space (priority -1) nvidia: loading NVIDIA NVdriver Kernel Module 1.0-2960 Tue May 14 07:41:42 PDT 2002 Device not ready. Make sure there is a disc in the drive. VFS: Disk change detected on device 08:00 sda : READ CAPACITY failed. sda : status = 1, message = 00, host = 0, driver = 08 Current sd00:00: sns = 70 2 ASC=3a ASCQ= 0 Raw sense data:0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x11 0x00 0x00 0x00 0x00 0x3a 0x00 0x00 0x00 0x00 0x00 0xff 0xfe 0x01 0x00 0x00 0x00 0x00 sda : block size assumed to be 512 bytes, disk size 1GB. /dev/scsi/host0/bus0/target6/lun0: I/O error: dev 08:00, sector 0 I/O error: dev 08:00, sector 0 reiserfs: checking transaction log (device 03:08) ... Using r5 hash to sort names ReiserFS version 3.6.25 reiserfs: checking transaction log (device 03:09) ... Using r5 hash to sort names ReiserFS version 3.6.25 PCI: Found IRQ 9 for device 02:0b.0 PCI: Sharing IRQ 9 with 00:1f.4 Device not ready. Make sure there is a disc in the drive. VFS: Disk change detected on device 08:00 sda : READ CAPACITY failed. sda : status = 1, message = 00, host = 0, driver = 08 Current sd00:00: sns = 70 2 ASC=3a ASCQ= 0 Raw sense data:0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x11 0x00 0x00 0x00 0x00 0x3a 0x00 0x00 0x00 0x00 0x00 0xff 0xfe 0x01 0x00 0x00 0x00 0x00 sda : block size assumed to be 512 bytes, disk size 1GB. /dev/scsi/host0/bus0/target6/lun0: I/O error: dev 08:00, sector 0 I/O error: dev 08:00, sector 0 lp0: compatibility mode NVRM: AGPGART: Intel i815 chipset NVRM: AGPGART: aperture: 64M @ 0xf8000000 NVRM: AGPGART: aperture mapped from 0xf8000000 to 0xe1ba8000 NVRM: AGPGART: mode 4x NVRM: AGPGART: allocated 16 pages Device not ready. Make sure there is a disc in the drive. VFS: Disk change detected on device 08:00 sda : READ CAPACITY failed. sda : status = 1, message = 00, host = 0, driver = 08 Current sd00:00: sns = 70 2 ASC=3a ASCQ= 0 Raw sense data:0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x11 0x00 0x00 0x00 0x00 0x3a 0x00 0x00 0x00 0x00 0x00 0xff 0xfe 0x01 0x00 0x00 0x00 0x00 sda : block size assumed to be 512 bytes, disk size 1GB. /dev/scsi/host0/bus0/target6/lun0: I/O error: dev 08:00, sector 0 I/O error: dev 08:00, sector 0 lp0: compatibility mode lp0: compatibility mode