Re: 2.4.19 - Promise TX2 Ultra133 (pdc20269) sticks at UDMA33

• Next message: Abramo Bagnara: "Re: [PATCH] (1/7) entropy, take 2 - log2"
• Previous message: Benjamin Herrenschmidt: "Re: IDE-flash device and hard disk on same controller"
• Next in thread: Tomas Szepe: "Re: 2.4.19 - Promise TX2 Ultra133 (pdc20269) sticks at UDMA33"
• Reply: Tomas Szepe: "Re: 2.4.19 - Promise TX2 Ultra133 (pdc20269) sticks at UDMA33"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

barrie_spence@agilent.com writes:

> I'm running 2.4.19 with a Promise TX2 Ultra133, but even though the
> card BIOS reports UDMA mode 5/6 on the drives, they are reported as
> UDMA33 by the kernel.
>
> Trying hdparm -X69 after boot gives the message "Speed warnings UDMA
> 3/4/5 is not functional."

I was waiting for this. As I have pointed out several times before,
there needs to be added a line

    hwif->udma_four = 1;

at the appropriate place in pdc202xx.c. I don't know where it should
be, so I can't write a patch.

-- 
Måns Rullgård
mru@users.sf.net
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

• Next message: Abramo Bagnara: "Re: [PATCH] (1/7) entropy, take 2 - log2"
• Previous message: Benjamin Herrenschmidt: "Re: IDE-flash device and hard disk on same controller"
• Next in thread: Tomas Szepe: "Re: 2.4.19 - Promise TX2 Ultra133 (pdc20269) sticks at UDMA33"
• Reply: Tomas Szepe: "Re: 2.4.19 - Promise TX2 Ultra133 (pdc20269) sticks at UDMA33"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

This archive was generated by hypermail 2b29 : Sat Aug 31 2002 - 22:00:13 EST