> > Talking about dumping oopsen, would there be any usefulness in outputting
> > crash data to the PC speaker, using a slow, (~300 bps) modulation that
> > would survive being captured on a cassette using a walkman with a
> > microphone, then decoded using a userspace program from a sampled .au file?
> This is easier and less error-prone than copying the oops down by hand?
Well, it is easy to make a mistake writing it down...
> I remember using 300 bps. On a closed electrical circuit without acoustic
> couplers, you still got line noise. Acoustic couplers put the speaker and
> microphone right on top of each other and surrounded them with a muffler to
> try to minimize ambient noise from the room...
WHAT? I have captured 1200/75 'prestel' style modem communications on tape, and played them back through a speaker, in to a phone handset, and had them faithfully reproduced on a terminal. Having said that, trying to use a 300 bps accustic coupler with a GSM phone wasn't successful, because you get some kind of inductive interference from the phone.
> > Just thought it might be easily implementable, as it doesn't have any
> > pre-requisits, (other than having a PC speaker, which *almost* everybody
> > has).
> Not everybody has a tape recorder, though.
> And the -ac branch already does output in morse code. Try taping that and
> writing a user mode interpreter for it, if you like...
Hmmm, that might be worth doing, because it gives you a way to automatically recover the data, rather than typing it in again, (which is prone to errors).
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to email@example.com
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Mon Sep 23 2002 - 22:00:16 EST