Rogier Wolff wrote:
> On Tue, Sep 17, 2002 at 10:13:13PM +0100, Mark C wrote:
> When dd is told to skip a certain number of input blocks it doesn't
> seek past them, but reads them and then discards them. Thus if you're
> not supposed to read sectors 1-100 then this will not work.
Fair enough. I, and the others though it did a seek.
> Try the following program:
> with the command:
> dd if=/dev/sda of=firstpart
> (Get the partition table)
> (seek 0x100000;dd of=secondpart) < /dev/sda
> Get everything beyond 1Mb. If this works, then we have to figure out
> how low we can make the "0x100000" number to get all of the data.
> Hypothesis: The partition table specifies that the data starts
> on sector 200, and they didn't implement sectors 1-199.....
Where did the sector 200 come from?
Something in the dmesg output from before?
(I don't really grok SCSI or USB at that level :( )
> Cheap basterds.
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to firstname.lastname@example.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Mon Sep 23 2002 - 22:00:20 EST