2.4.20-pre7-ac3 aic7xxx broken?

From: Konstantin Kletschke (konsti@ludenkalle.de)
Date: Mon Sep 23 2002 - 13:00:18 EST


I wonder if my

Bus 0, device 9, function 0:
      SCSI storage controller: Adaptec AHA-7850 (rev 3).
        IRQ 11.
        Master Capable. Latency=32. Min Gnt=4.Max Lat=4.
        I/O at 0xa000 [0xa0ff].
        Non-prefetchable 32 bit memory at 0xe7001000 [0xe7001fff].

is broken or the aic7xxx driver in linux-2.4.20-pre7-ac3?

The modul loads fine, the cdrom seems to work properly, though,
but this messages appears in my

==> /var/log/syslog <==
Sep 23 19:32:23 sexmachine kernel: scsi1: PCI error Interrupt at seqaddr
= 0x9
Sep 23 19:32:23 sexmachine kernel: scsi1: Data Parity Error Detected
during address or write data phase

several times a minute. The aic7xxx_old produces no errorr messages...


Kletschke & Uhlig GbR: 
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

This archive was generated by hypermail 2b29 : Mon Sep 23 2002 - 22:00:39 EST