[2.4] Serial updates

From: Russell King (rmk@arm.linux.org.uk)
Date: Sat Oct 05 2002 - 18:47:37 EST


I've just asked Linus to integrate the following into his tree. This
patch has appeared on lkml in the past (but this version fixes the
includes correctly.)

There are a couple of issues outstanding:

 - reduced performance (maybe)
 - OX16950 detection causing Oxford 950 port to be non-functional

 drivers/serial/8250.c | 54 ++++++++++++++++++++++++++------------------
 drivers/serial/8250.h | 5 +++-
 include/linux/serial_core.h | 2 +
 3 files changed, 39 insertions, 22 deletions

# This is a BitKeeper generated patch for the following project:
# Project Name: Linux kernel tree
# This patch format is intended for GNU patch command version 2.5 or higher.
# This patch includes the following deltas:
# ChangeSet 1.737 -> 1.739
# drivers/serial/8250.h 1.4 -> 1.5
# drivers/serial/8250.c 1.11 -> 1.13
# include/linux/serial_core.h 1.2 -> 1.3
#
# The following is the BitKeeper ChangeSet Log
# --------------------------------------------
# 02/10/05 rmk@flint.arm.linux.org.uk 1.738
# [SERIAL] Allow PCMCIA serial cards to work again.
# The PCMCIA layer claims the IO or memory regions for all cards. This
# means that any port registered via 8250_cs must not cause the 8250
# code to claim the resources itself.
#
# We also add support for iomem-based ports at initialisation time for
# PPC.
# --------------------------------------------
# 02/10/06 rmk@flint.arm.linux.org.uk 1.739
# [SERIAL] Fix serial includes for modversions/modules.
# This fixes the build error that occurs if you have a certain selection
# of module/modversions settings.
# --------------------------------------------
#
diff -Nru a/drivers/serial/8250.c b/drivers/serial/8250.c
--- a/drivers/serial/8250.c Sun Oct 6 00:22:07 2002
+++ b/drivers/serial/8250.c Sun Oct 6 00:22:07 2002
@@ -32,6 +32,7 @@
 #include <linux/sysrq.h>
 #include <linux/serial_reg.h>
 #include <linux/serialP.h>
+#include <linux/serial.h>
 #include <linux/delay.h>
 
 #include <asm/io.h>
@@ -1560,21 +1561,22 @@
 {
         struct uart_8250_port *up = (struct uart_8250_port *)port;
         struct resource *res = NULL, *res_rsa = NULL;
- int ret = -EBUSY;
+ int ret = 0;
 
- if (up->port.type == PORT_RSA) {
- ret = serial8250_request_rsa_resource(up, &res_rsa);
- if (ret)
- return ret;
- }
+ if (up->port.flags & UPF_RESOURCES) {
+ if (up->port.type == PORT_RSA) {
+ ret = serial8250_request_rsa_resource(up, &res_rsa);
+ if (ret)
+ return ret;
+ }
 
- ret = serial8250_request_std_resource(up, &res);
+ ret = serial8250_request_std_resource(up, &res);
+ }
 
         /*
          * If we have a mapbase, then request that as well.
          */
- if (res != NULL && up->port.iotype == SERIAL_IO_MEM &&
- up->port.mapbase) {
+ if (ret == 0 && up->port.flags & UPF_IOREMAP) {
                 int size = res->end - res->start + 1;
 
                 up->port.membase = ioremap(up->port.mapbase, size);
@@ -1610,13 +1612,17 @@
          * Find the region that we can probe for. This in turn
          * tells us whether we can probe for the type of port.
          */
- ret = serial8250_request_std_resource(up, &res_std);
- if (ret)
- return;
+ if (up->port.flags & UPF_RESOURCES) {
+ ret = serial8250_request_std_resource(up, &res_std);
+ if (ret)
+ return;
 
- ret = serial8250_request_rsa_resource(up, &res_rsa);
- if (ret)
+ ret = serial8250_request_rsa_resource(up, &res_rsa);
+ if (ret)
+ probeflags &= ~PROBE_RSA;
+ } else {
                 probeflags &= ~PROBE_RSA;
+ }
 
         if (flags & UART_CONFIG_TYPE)
                 autoconfig(up, probeflags);
@@ -1678,6 +1684,7 @@
 
 static void __init serial8250_isa_init_ports(void)
 {
+ struct uart_8250_port *up;
         static int first = 1;
         int i;
 
@@ -1685,13 +1692,18 @@
                 return;
         first = 0;
 
- for (i = 0; i < ARRAY_SIZE(old_serial_port); i++) {
- serial8250_ports[i].port.iobase = old_serial_port[i].port;
- serial8250_ports[i].port.irq = irq_cannonicalize(old_serial_port[i].irq);
- serial8250_ports[i].port.uartclk = old_serial_port[i].base_baud * 16;
- serial8250_ports[i].port.flags = old_serial_port[i].flags;
- serial8250_ports[i].port.hub6 = old_serial_port[i].hub6;
- serial8250_ports[i].port.ops = &serial8250_pops;
+ for (i = 0, up = serial8250_ports; i < ARRAY_SIZE(old_serial_port);
+ i++, up++) {
+ up->port.iobase = old_serial_port[i].port;
+ up->port.irq = irq_cannonicalize(old_serial_port[i].irq);
+ up->port.uartclk = old_serial_port[i].baud_base * 16;
+ up->port.flags = old_serial_port[i].flags |
+ UPF_RESOURCES;
+ up->port.hub6 = old_serial_port[i].hub6;
+ up->port.membase = old_serial_port[i].iomem_base;
+ up->port.iotype = old_serial_port[i].io_type;
+ up->port.regshift = old_serial_port[i].iomem_reg_shift;
+ up->port.ops = &serial8250_pops;
         }
 }
 
diff -Nru a/drivers/serial/8250.h b/drivers/serial/8250.h
--- a/drivers/serial/8250.h Sun Oct 6 00:22:07 2002
+++ b/drivers/serial/8250.h Sun Oct 6 00:22:07 2002
@@ -30,11 +30,14 @@
 
 struct old_serial_port {
         unsigned int uart;
- unsigned int base_baud;
+ unsigned int baud_base;
         unsigned int port;
         unsigned int irq;
         unsigned int flags;
         unsigned char hub6;
+ unsigned char io_type;
+ unsigned char *iomem_base;
+ unsigned short iomem_reg_shift;
 };
 
 #undef SERIAL_DEBUG_PCI
diff -Nru a/include/linux/serial_core.h b/include/linux/serial_core.h
--- a/include/linux/serial_core.h Sun Oct 6 00:22:07 2002
+++ b/include/linux/serial_core.h Sun Oct 6 00:22:07 2002
@@ -168,6 +168,8 @@
 #define UPF_BUGGY_UART (1 << 14)
 #define UPF_AUTOPROBE (1 << 15)
 #define UPF_BOOT_AUTOCONF (1 << 28)
+#define UPF_RESOURCES (1 << 30)
+#define UPF_IOREMAP (1 << 31)
 
 #define UPF_FLAGS (0x7fff)
 #define UPF_USR_MASK (UPF_SPD_MASK|UPF_LOW_LATENCY)

-- 
Russell King (rmk@arm.linux.org.uk)                The developer of ARM Linux
             http://www.arm.linux.org.uk/personal/aboutme.html

- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Mon Oct 07 2002 - 22:00:52 EST