[BENCHMARK] 2.5.41 contest results

From: Con Kolivas (conman@kolivas.net)
Date: Tue Oct 08 2002 - 15:59:12 EST


The original posting of this disappeared into the ether so here is another copy
for lkml.

Here follow the contest (http://contest.kolivas.net) benchmark results up to and
including 2.5.41

noload:
Kernel [runs] Time CPU% Loads LCPU% Ratio
2.4.19 [3] 67.7 98 0 0 1.01
2.5.38 [3] 72.0 93 0 0 1.07
2.5.39 [2] 72.2 93 0 0 1.07
2.5.40 [1] 72.5 93 0 0 1.08
2.5.40-mm2 [1] 72.2 93 0 0 1.07
2.5.41 [1] 73.8 93 0 0 1.10

process_load:
Kernel [runs] Time CPU% Loads LCPU% Ratio
2.4.19 [3] 106.5 59 112 43 1.59
2.5.38 [3] 89.5 74 34 28 1.33
2.5.39 [2] 91.2 73 36 28 1.36
2.5.40 [2] 82.8 80 25 23 1.23
2.5.40-mm2 [1] 98.0 69 45 33 1.46
2.5.41 [1] 91.1 73 38 30 1.36

Proportional change here. Time longer than .40 but load also achieving more in
that time; not a real performance penalty.

io_load:
Kernel [runs] Time CPU% Loads LCPU% Ratio
2.4.19 [3] 492.6 14 38 10 7.33
2.5.38 [1] 4000.0 1 500 1 59.55
2.5.39 [2] 423.9 18 30 11 6.31
2.5.40 [1] 315.7 25 22 10 4.70
2.5.40-mm2 [2] 208.0 38 12 10 3.10
2.5.41 [2] 607.5 13 47 12 9.04

Something happened here. Under heavy writing load it started choking again.
Noticeably detrimental.

mem_load:
Kernel [runs] Time CPU% Loads LCPU% Ratio
2.4.19 [3] 100.0 72 33 3 1.49
2.5.38 [3] 107.3 70 34 3 1.60
2.5.39 [2] 103.1 72 31 3 1.53
2.5.40 [2] 102.5 72 31 3 1.53
2.5.40-mm2 [2] 165.1 44 38 2 2.46
2.5.41 [1] 101.6 73 30 3 1.51

read_load:
Kernel [runs] Time CPU% Loads LCPU% Ratio
2.4.19 [2] 134.1 54 14 5 2.00
2.5.38 [2] 100.5 76 9 5 1.50
2.5.39 [2] 101.3 74 14 6 1.51
2.5.40 [1] 101.5 73 13 5 1.51
2.5.40-mm2 [1] 102.7 75 7 4 1.53
2.5.41 [1] 101.1 75 7 4 1.51

Basically very similar results except for write loads being allowed to do more
to the detriment of other tasks.

Below are also the experimental loads not included in the stable release of contest:

tarx_load:
Kernel [runs] Time CPU% Loads LCPU% Ratio
2.4.19 [1] 132.4 55 2 9 1.97
2.5.38 [1] 120.5 63 2 8 1.79
2.5.39 [1] 108.3 69 1 6 1.61
2.5.40 [1] 110.7 68 1 6 1.65
2.5.40-mm2 [1] 188.1 39 3 7 2.80
2.5.41 [2] 138.8 53 2 8 2.07

Tar extract load seems to be doing proportionately more work than .40

tarc_load:
Kernel [runs] Time CPU% Loads LCPU% Ratio
2.4.19 [2] 106.5 70 1 8 1.59
2.5.38 [1] 97.2 79 1 6 1.45
2.5.39 [1] 91.8 83 1 6 1.37
2.5.40 [1] 96.9 80 1 6 1.44
2.5.40-mm2 [1] 91.9 82 1 6 1.37
2.5.41 [1] 93.3 81 1 6 1.39

lslr_load:
Kernel [runs] Time CPU% Loads LCPU% Ratio
2.4.19 [1] 89.8 77 1 20 1.34
2.5.38 [1] 99.1 71 1 20 1.48
2.5.39 [1] 101.3 70 2 24 1.51
2.5.40 [1] 97.0 72 1 21 1.44
2.5.40-mm2 [1] 94.3 75 1 21 1.40
2.5.41 [1] 93.6 75 1 18 1.39

Con
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Tue Oct 15 2002 - 22:00:27 EST