RE: Update on e1000 troubles (over-heating!)

From: Feldman, Scott (scott.feldman@intel.com)
Date: Mon Oct 14 2002 - 21:20:04 EST


> Here is the lspci information, both -x and -vv. This is with
> two of the e1000 single-port NICS side-by-side. I have also
> strapped a P-IV CPU fan on top of the two cards to blow some
> air over them....running tests now to see if that actually
> helps anything. If it does, I'll be sure to send you a picture :)

Ben, I checked the datasheet for the part shown in the lspci dump, and it
shows an operating temperature of 0-55 degrees C. You said you measured 50
degrees C, so you're within the safe range. Did the fans help?

Here's the datasheet:
http://www.intel.com/network/connectivity/resources/doc_library/data_sheets/
pro1000mt_sa.pdf

-scott
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Tue Oct 15 2002 - 22:00:53 EST