Marcelo, all,
Better late then never, here is the final patch needed to get the
summit based x440 booting w/ all CPUs. This patch (originally by James
Cleverdon)introduces config options similar to 2.5, enables
autodetection of x440 and NUMAQ hardware, and adds the last bit of
required changes (enlarged MAX_IO_APICS, etc - all wrapped in
CONFIG_X86_CLUSTERED_APIC).
Compiles and boots on:
o NUMAQ
o x440
o SMP
o UP
please consider for inclusion.
thanks
-john
diff -Nru a/Documentation/Configure.help b/Documentation/Configure.help
--- a/Documentation/Configure.help Wed Oct 16 20:38:05 2002
+++ b/Documentation/Configure.help Wed Oct 16 20:38:05 2002
@@ -246,13 +246,21 @@
If unsure, say N.
-Multiquad support for NUMA systems
-CONFIG_MULTIQUAD
+Multiquad support for NUMAQ systems
+CONFIG_X86_NUMAQ
This option is used for getting Linux to run on a (IBM/Sequent) NUMA
multiquad box. This changes the way that processors are bootstrapped,
and uses Clustered Logical APIC addressing mode instead of Flat Logical.
You will need a new lynxer.elf file to flash your firmware with - send
email to Martin.Bligh@us.ibm.com
+
+Support for IBM Summit (EXA) systems
+CONFIG_X86_SUMMIT
+ This option is needed for IBM systems that use the Summit/EXA chipset.
+ (EXA: Extendable Xseries Architecture)In particular, it is needed for
+ the x440 (even for the 4-CPU model).
+
+ If you don't have this computer, you may safely say N.
IO-APIC support on uniprocessors
CONFIG_X86_UP_IOAPIC
diff -Nru a/arch/i386/config.in b/arch/i386/config.in
--- a/arch/i386/config.in Wed Oct 16 20:38:05 2002
+++ b/arch/i386/config.in Wed Oct 16 20:38:05 2002
@@ -216,7 +216,19 @@
define_bool CONFIG_X86_IO_APIC y
fi
else
- bool 'Multiquad NUMA system' CONFIG_MULTIQUAD
+ bool 'Multi-node NUMA system support' CONFIG_X86_NUMA
+ if [ "$CONFIG_X86_NUMA" = "y" ]; then
+ #Platform Choices
+ bool ' Multiquad (IBM/Sequent) NUMAQ support' CONFIG_X86_NUMAQ
+ if [ "$CONFIG_X86_NUMAQ" = "y" ]; then
+ define_bool CONFIG_X86_CLUSTERED_APIC y
+ define_bool CONFIG_MULTIQUAD y
+ fi
+ bool ' IBM x440 (Summit/EXA) support' CONFIG_X86_SUMMIT
+ if [ "$CONFIG_X86_SUMMIT" = "y" ]; then
+ define_bool CONFIG_X86_CLUSTERED_APIC y
+ fi
+ fi
fi
bool 'Unsynced TSC support' CONFIG_X86_TSC_DISABLE
diff -Nru a/arch/i386/kernel/mpparse.c b/arch/i386/kernel/mpparse.c
--- a/arch/i386/kernel/mpparse.c Wed Oct 16 20:38:05 2002
+++ b/arch/i386/kernel/mpparse.c Wed Oct 16 20:38:05 2002
@@ -67,8 +67,11 @@
unsigned long phys_cpu_present_map;
unsigned long logical_cpu_present_map;
+#ifdef CONFIG_X86_CLUSTERED_APIC
unsigned char esr_disable = 0;
-
+unsigned char clustered_apic_mode = CLUSTERED_APIC_NONE;
+unsigned int apic_broadcast_id = APIC_BROADCAST_ID_APIC;
+#endif
unsigned char raw_phys_apicid[NR_CPUS] = { [0 ... NR_CPUS-1] = BAD_APICID };
/*
@@ -400,7 +403,7 @@
static int __init smp_read_mpc(struct mp_config_table *mpc)
{
- char str[16];
+ char oem[16], prod[14];
int count=sizeof(*mpc);
unsigned char *mpt=((unsigned char *)mpc)+count;
@@ -425,14 +428,16 @@
printk(KERN_ERR "SMP mptable: null local APIC address!\n");
return 0;
}
- memcpy(str,mpc->mpc_oem,8);
- str[8]=0;
- printk("OEM ID: %s ",str);
-
- memcpy(str,mpc->mpc_productid,12);
- str[12]=0;
- printk("Product ID: %s ",str);
+ memcpy(oem,mpc->mpc_oem,8);
+ oem[8]=0;
+ printk("OEM ID: %s ",oem);
+
+ memcpy(prod,mpc->mpc_productid,12);
+ prod[12]=0;
+ printk("Product ID: %s ",prod);
+ detect_clustered_apic(oem, prod);
+
printk("APIC at: 0x%lX\n",mpc->mpc_lapic);
/* save the local APIC address, it might be non-default,
@@ -512,9 +517,18 @@
}
if (clustered_apic_mode){
- esr_disable = 1;
phys_cpu_present_map = logical_cpu_present_map;
}
+
+
+ printk("Enabling APIC mode: ");
+ if(clustered_apic_mode == CLUSTERED_APIC_NUMAQ)
+ printk("Clustered Logical. ");
+ else if(clustered_apic_mode == CLUSTERED_APIC_XAPIC)
+ printk("Physical. ");
+ else
+ printk("Flat. ");
+ printk("Using %d I/O APICs\n",nr_ioapics);
if (!num_processors)
printk(KERN_ERR "SMP mptable: no processors registered!\n");
diff -Nru a/include/asm-i386/apicdef.h b/include/asm-i386/apicdef.h
--- a/include/asm-i386/apicdef.h Wed Oct 16 20:38:05 2002
+++ b/include/asm-i386/apicdef.h Wed Oct 16 20:38:05 2002
@@ -110,7 +110,12 @@
#define APIC_BASE (fix_to_virt(FIX_APIC_BASE))
+#ifdef CONFIG_X86_CLUSTERED_APIC
+#define MAX_IO_APICS 32
+#else
#define MAX_IO_APICS 8
+#endif
+
/*
* The broadcast ID is 0xF for old APICs and 0xFF for xAPICs. SAPICs
diff -Nru a/include/asm-i386/mpspec.h b/include/asm-i386/mpspec.h
--- a/include/asm-i386/mpspec.h Wed Oct 16 20:38:05 2002
+++ b/include/asm-i386/mpspec.h Wed Oct 16 20:38:05 2002
@@ -15,12 +15,13 @@
/*
* a maximum of 16 APICs with the current APIC ID architecture.
+ * xAPICs can have up to 256. SAPICs have 16 ID bits.
*/
-#ifdef CONFIG_MULTIQUAD
+#ifdef CONFIG_X86_CLUSTERED_APIC
#define MAX_APICS 256
-#else /* !CONFIG_MULTIQUAD */
+#else
#define MAX_APICS 16
-#endif /* CONFIG_MULTIQUAD */
+#endif
#define MAX_MPC_ENTRY 1024
diff -Nru a/include/asm-i386/smpboot.h b/include/asm-i386/smpboot.h
--- a/include/asm-i386/smpboot.h Wed Oct 16 20:38:05 2002
+++ b/include/asm-i386/smpboot.h Wed Oct 16 20:38:05 2002
@@ -8,13 +8,9 @@
CLUSTERED_APIC_NUMAQ
};
-#ifdef CONFIG_MULTIQUAD
- #define clustered_apic_mode (CLUSTERED_APIC_NUMAQ)
-#else /* !CONFIG_MULTIQUAD */
- #define clustered_apic_mode (CLUSTERED_APIC_NONE)
-#endif /* CONFIG_MULTIQUAD */
-
-#ifdef CONFIG_X86_LOCAL_APIC
+#ifdef CONFIG_X86_CLUSTERED_APIC
+extern unsigned int apic_broadcast_id;
+extern unsigned char clustered_apic_mode;
extern unsigned char esr_disable;
static inline int target_cpus(void)
{
@@ -26,22 +22,39 @@
}
return cpu_online_map;
}
-#ifdef CONFIG_X86_IO_APIC
extern unsigned char int_delivery_mode;
extern unsigned int int_dest_addr_mode;
+static inline void detect_clustered_apic(char* oem, char* prod)
+{
+ /*
+ * Can't recognize Summit xAPICs at present, so use the OEM ID.
+ */
+ if (!strncmp(oem, "IBM ENSW", 8) && !strncmp(prod, "VIGIL SMP", 9)){
+ clustered_apic_mode = CLUSTERED_APIC_XAPIC;
+ apic_broadcast_id = APIC_BROADCAST_ID_XAPIC;
+ int_dest_addr_mode = APIC_DEST_PHYSICAL;
+ int_delivery_mode = dest_Fixed;
+ esr_disable = 1;
+ }
+ else if (!strncmp(oem, "IBM NUMA", 8)){
+ clustered_apic_mode = CLUSTERED_APIC_NUMAQ;
+ apic_broadcast_id = APIC_BROADCAST_ID_APIC;
+ int_dest_addr_mode = APIC_DEST_LOGICAL;
+ int_delivery_mode = dest_LowestPrio;
+ esr_disable = 1;
+ }
+}
#define INT_DEST_ADDR_MODE (int_dest_addr_mode)
#define INT_DELIVERY_MODE (int_delivery_mode)
-#endif /* CONFIG_X86_IO_APIC */
-#else /* CONFIG_X86_LOCAL_APIC */
+#else /* CONFIG_X86_CLUSTERED_APIC */
+#define apic_broadcast_id (APIC_BROADCAST_ID_APIC)
+#define clustered_apic_mode (CLUSTERED_APIC_NONE)
#define esr_disable (0)
#define target_cpus() (0x01)
-#ifdef CONFIG_X86_IO_APIC
+#define detect_clustered_apic(x,y)
#define INT_DEST_ADDR_MODE (APIC_DEST_LOGICAL) /* logical delivery */
#define INT_DELIVERY_MODE (dest_LowestPrio)
-#endif /* CONFIG_X86_IO_APIC */
-#endif /* CONFIG_X86_LOCAL_APIC */
-
-#define apic_broadcast_id (APIC_BROADCAST_ID_APIC)
+#endif /* CONFIG_X86_CLUSTERED_APIC */
#define BAD_APICID 0xFFu
#define TRAMPOLINE_LOW phys_to_virt((clustered_apic_mode == CLUSTERED_APIC_NUMAQ)?0x8:0x467)
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Wed Oct 23 2002 - 22:00:32 EST