This is part 11/26 of patchset for add support NEC PC-9800 architecture,
against 2.5.43.
Summary:
input modules
- add new driver for PC-9800 standard keyboard and mouse.
input.h changes are temporally hack.
I'll remove this hack using propery keycode.
To do this, I need "kbd" utility that can make keymap even if keycode > 127.
diffstat:
drivers/input/keyboard/98kbd.c | 359 +++++++++++++++++++++++++++++++++++++++
drivers/input/keyboard/Config.in | 4
drivers/input/keyboard/Makefile | 1
drivers/input/misc/pcspkr.c | 24 ++
drivers/input/mouse/Config.in | 7
drivers/input/mouse/logibm.c | 48 +++++
drivers/input/serio/Config.in | 3
drivers/input/serio/Makefile | 1
drivers/input/serio/i8042-98.c | 346 +++++++++++++++++++++++++++++++++++++
drivers/input/serio/i8042-98io.h | 74 ++++++++
drivers/input/serio/i8042.h | 2
include/linux/input.h | 21 ++
12 files changed, 890 insertions(+)
patch:
diff -urN linux/drivers/input/keyboard/Config.in linux98/drivers/input/keyboard/Config.in
--- linux/drivers/input/keyboard/Config.in Sat Oct 12 13:22:45 2002
+++ linux98/drivers/input/keyboard/Config.in Sun Oct 13 11:29:55 2002
@@ -9,6 +9,10 @@
dep_tristate ' XT Keyboard support' CONFIG_KEYBOARD_XTKBD $CONFIG_INPUT $CONFIG_INPUT_KEYBOARD $CONFIG_SERIO
dep_tristate ' Newton keyboard' CONFIG_KEYBOARD_NEWTON $CONFIG_INPUT $CONFIG_INPUT_KEYBOARD $CONFIG_SERIO
+if [ "$CONFIG_PC9800" = "y" ]; then
+ dep_tristate ' NEC PC-9801 keyboard support' CONFIG_KEYBOARD_98KBD $CONFIG_INPUT $CONFIG_INPUT_KEYBOARD $CONFIG_SERIO
+fi
+
if [ "$CONFIG_SH_DREAMCAST" = "y" ]; then
dep_tristate ' Maple bus keyboard support' CONFIG_KEYBOARD_MAPLE $CONFIG_INPUT $CONFIG_INPUT_KEYBOARD $CONFIG_MAPLE
fi
diff -urN linux/drivers/input/keyboard/Makefile linux98/drivers/input/keyboard/Makefile
--- linux/drivers/input/keyboard/Makefile Sat Oct 12 13:21:42 2002
+++ linux98/drivers/input/keyboard/Makefile Sun Oct 13 11:27:15 2002
@@ -10,6 +10,7 @@
obj-$(CONFIG_KEYBOARD_XTKBD) += xtkbd.o
obj-$(CONFIG_KEYBOARD_AMIGA) += amikbd.o
obj-$(CONFIG_KEYBOARD_NEWTON) += newtonkbd.o
+obj-$(CONFIG_KEYBOARD_98KBD) += 98kbd.o
# The global Rules.make.
diff -urN linux/drivers/input/keyboard/98kbd.c linux98/drivers/input/keyboard/98kbd.c
--- linux/drivers/input/keyboard/98kbd.c Thu Jan 1 09:00:00 1970
+++ linux98/drivers/input/keyboard/98kbd.c Sun Oct 13 12:25:32 2002
@@ -0,0 +1,359 @@
+/*
+ * NEC PC-9801/9821 keyboard driver
+ *
+ * Copyright (c) 1999-2002 Vojtech Pavlik
+ * Modify for NEC PC-9801 by Osamu Tomita <tomita@cinet.co.jp>
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/serio.h>
+#include <linux/workqueue.h>
+
+#include <asm/io.h>
+#include <asm/pc9800.h>
+
+MODULE_AUTHOR("Osamu Tomita <tomita@cinet.co.jp>");
+MODULE_DESCRIPTION("NEC PC-9801 keyboard driver");
+MODULE_LICENSE("GPL");
+
+/*
+ * Scancode to keycode tables. These are just the default setting, and
+ * are loadable via an userland utility.
+ */
+
+#if 0 /* Waiting for kbd utility support keycode > 127 */
+static unsigned char atkbd_set2_keycode[512] = {
+ 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 43, 14, 15,
+ 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 30, 31, 32,
+ 33, 34, 35, 36, 37, 38, 39, 40, 84, 44, 45, 46, 47, 48, 49, 50,
+ 51, 52, 53,181, 57,184,109,104,110,111,103,105,106,108,102,107,
+ 74, 98, 71, 72, 73, 55, 75, 76, 77, 78, 79, 80, 81,117, 82,124,
+ 83,185, 87, 88, 85, 89, 90, 0, 0, 0, 0, 0, 0, 0,102, 0,
+ 99,133, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, 0, 0, 0, 0,
+ 42, 58,190, 56, 29
+#else
+static unsigned char atkbd_set2_keycode[512] = {
+ 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15,
+ 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
+ 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47,
+ 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63,
+ 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79,
+ 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95,
+ 96, 97, 98, 99,100,101,102,103,104,105,106,107,108,109,110,111,
+ 112,113,114,115,116,117,118,119,120,121,122,123,124,125,126,127
+};
+#endif
+
+#define ATKBD_CMD_SETEXKEY 0x1095 /* Enable/Disable Windows, Appli key */
+#define ATKBD_CMD_SETRATE 0x109c /* Set typematic rate */
+#define ATKBD_CMD_SETLEDS 0x109d /* Set keyboard leds */
+#define ATKBD_CMD_GETLEDS 0x119d /* Get keyboard leds */
+#define ATKBD_CMD_GETID 0x019f
+
+#define ATKBD_RET_ACK 0xfa
+#define ATKBD_RET_NAK 0xfc /* Command NACK, send the cmd again */
+
+#define ATKBD_KEY_UNKNOWN 0
+#define ATKBD_KEY_BAT 251
+#define ATKBD_KEY_EMUL0 252
+#define ATKBD_KEY_EMUL1 253
+#define ATKBD_KEY_RELEASE 254
+#define ATKBD_KEY_NULL 255
+
+/*
+ * The atkbd control structure
+ */
+
+struct atkbd {
+ unsigned char keycode[512];
+ struct input_dev dev;
+ struct serio *serio;
+ char name[64];
+ char phys[32];
+ unsigned char cmdbuf[4];
+ unsigned char cmdcnt;
+ unsigned char set;
+ unsigned char oldset;
+ unsigned char release;
+ signed char ack;
+ unsigned char emul;
+ unsigned short id;
+ unsigned char write;
+};
+
+/*
+ * atkbd_interrupt(). Here takes place processing of data received from
+ * the keyboard into events.
+ */
+
+static void atkbd_interrupt(struct serio *serio, unsigned char data, unsigned int flags)
+{
+ struct atkbd *atkbd = serio->private;
+ int code = data;
+
+#ifdef ATKBD_DEBUG
+ printk(KERN_DEBUG "atkbd.c: Received %02x flags %02x\n", data, flags);
+#endif
+
+ switch (code) {
+ case ATKBD_RET_ACK:
+ atkbd->ack = 1;
+ return;
+ case ATKBD_RET_NAK:
+ atkbd->ack = -1;
+ return;
+ }
+
+ if (atkbd->cmdcnt) {
+ atkbd->cmdbuf[--atkbd->cmdcnt] = code;
+ return;
+ }
+
+ atkbd->release = (code & 0x80) ? 1 : 0;
+ code &= 0x7f;
+
+ switch (atkbd->keycode[code]) {
+ case ATKBD_KEY_NULL:
+ break;
+#if 0
+ case ATKBD_KEY_UNKNOWN:
+ printk(KERN_WARNING "98kbd.c: Unknown key (set %d, scancode %#x, on %s) %s.\n",
+ atkbd->set, code, serio->phys, atkbd->release ? "released" : "pressed");
+ break;
+#endif
+ default:
+ input_report_key(&atkbd->dev, atkbd->keycode[code], !atkbd->release);
+ input_sync(&atkbd->dev);
+ }
+
+ atkbd->release = 0;
+}
+
+/*
+ * atkbd_sendbyte() sends a byte to the keyboard, and waits for
+ * acknowledge. It doesn't handle resends according to the keyboard
+ * protocol specs, because if these are needed, the keyboard needs
+ * replacement anyway, and they only make a mess in the protocol.
+ */
+
+static int atkbd_sendbyte(struct atkbd *atkbd, unsigned char byte)
+{
+ int timeout = 10000; /* 100 msec */
+ atkbd->ack = 0;
+
+#ifdef ATKBD_DEBUG
+ printk(KERN_DEBUG "atkbd.c: Sent: %02x\n", byte);
+#endif
+ if (serio_write(atkbd->serio, byte))
+ return -1;
+
+ while (!atkbd->ack && timeout--) udelay(10);
+
+ return -(atkbd->ack <= 0);
+}
+
+/*
+ * atkbd_command() sends a command, and its parameters to the keyboard,
+ * then waits for the response and puts it in the param array.
+ */
+
+static int atkbd_command(struct atkbd *atkbd, unsigned char *param, int command)
+{
+ int timeout = 50000; /* 500 msec */
+ int send = (command >> 12) & 0xf;
+ int receive = (command >> 8) & 0xf;
+ int i;
+
+ atkbd->cmdcnt = receive;
+
+ if (command & 0xff)
+ if (atkbd_sendbyte(atkbd, command & 0xff))
+ return (atkbd->cmdcnt = 0) - 1;
+
+ for (i = 0; i < send; i++)
+ if (atkbd_sendbyte(atkbd, param[i]))
+ return (atkbd->cmdcnt = 0) - 1;
+
+ while (atkbd->cmdcnt && timeout--) udelay(10);
+
+ if (param)
+ for (i = 0; i < receive; i++)
+ param[i] = atkbd->cmdbuf[(receive - 1) - i];
+
+ if (atkbd->cmdcnt)
+ return (atkbd->cmdcnt = 0) - 1;
+
+ return 0;
+}
+
+/*
+ * Event callback from the input module. Events that change the state of
+ * the hardware are processed here.
+ */
+
+static int atkbd_event(struct input_dev *dev, unsigned int type, unsigned int code, int value)
+{
+ struct atkbd *atkbd = dev->private;
+ char param[2];
+
+ if (!atkbd->write)
+ return -1;
+
+ switch (type) {
+
+ case EV_LED:
+
+ if (__PC9800SCA_TEST_BIT(0x481, 3)) {
+ /* 98note with Num Lock key */
+ /* keep Num Lock status */
+ *param = 0x60;
+ if (atkbd_command(atkbd, param,
+ ATKBD_CMD_GETLEDS))
+ printk(KERN_DEBUG
+ "atkbd: Get keyboard LED"
+ " status Error\n");
+
+ *param &= 1;
+ } else {
+ /* desktop PC-9801 */
+ *param = 1; /* Allways set Num Lock */
+ }
+
+ *param |= 0x70
+ | (test_bit(LED_CAPSL, dev->led) ? 4 : 0)
+ | (test_bit(LED_KANA, dev->led) ? 8 : 0);
+ atkbd_command(atkbd, param, ATKBD_CMD_SETLEDS);
+
+ return 0;
+ }
+
+ return -1;
+}
+
+/*
+ * atkbd_cleanup() restores the keyboard state so that BIOS is happy after a
+ * reboot.
+ */
+
+static void atkbd_cleanup(struct serio *serio)
+{
+}
+
+/*
+ * atkbd_disconnect() closes and frees.
+ */
+
+static void atkbd_disconnect(struct serio *serio)
+{
+ struct atkbd *atkbd = serio->private;
+ input_unregister_device(&atkbd->dev);
+ serio_close(serio);
+ kfree(atkbd);
+}
+
+/*
+ * atkbd_connect() is called when the serio module finds and interface
+ * that isn't handled yet by an appropriate device driver. We check if
+ * there is an AT keyboard out there and if yes, we register ourselves
+ * to the input module.
+ */
+
+static void atkbd_connect(struct serio *serio, struct serio_dev *dev)
+{
+ struct atkbd *atkbd;
+ int i;
+
+ if ((serio->type & SERIO_TYPE) != SERIO_8042 &&
+ (((serio->type & SERIO_TYPE) != SERIO_RS232) || (serio->type & SERIO_PROTO) != SERIO_PS2SER))
+ return;
+
+ if (!(atkbd = kmalloc(sizeof(struct atkbd), GFP_KERNEL)))
+ return;
+
+ memset(atkbd, 0, sizeof(struct atkbd));
+
+ if ((serio->type & SERIO_TYPE) == SERIO_8042 && serio->write)
+ atkbd->write = 1;
+
+ if (atkbd->write) {
+ atkbd->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_LED) | BIT(EV_REP);
+ atkbd->dev.ledbit[0] = BIT(LED_NUML) | BIT(LED_CAPSL) | BIT(LED_SCROLLL) | BIT(LED_KANA);
+ } else atkbd->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_REP);
+
+ atkbd->serio = serio;
+
+ init_input_dev(&atkbd->dev);
+
+ atkbd->dev.keycode = atkbd->keycode;
+ atkbd->dev.keycodesize = sizeof(unsigned char);
+ atkbd->dev.keycodemax = ARRAY_SIZE(atkbd_set2_keycode);
+ atkbd->dev.event = atkbd_event;
+ atkbd->dev.private = atkbd;
+
+ serio->private = atkbd;
+
+ if (serio_open(serio, dev)) {
+ kfree(atkbd);
+ return;
+ }
+
+ atkbd->set = 2;
+ atkbd->id = 0x9800;
+ sprintf(atkbd->name, "NEC PC-9801 keyboard");
+
+ sprintf(atkbd->phys, "%s/input0", serio->phys);
+
+ memcpy(atkbd->keycode, atkbd_set2_keycode, sizeof(atkbd->keycode));
+
+ atkbd->dev.name = atkbd->name;
+ atkbd->dev.phys = atkbd->phys;
+ atkbd->dev.id.bustype = BUS_I8042;
+ atkbd->dev.id.vendor = 0x0001;
+ atkbd->dev.id.product = atkbd->set;
+ atkbd->dev.id.version = atkbd->id;
+
+ for (i = 0; i < 512; i++)
+#if 0
+ if (atkbd->keycode[i] && atkbd->keycode[i] <= 250)
+#else
+ if (atkbd->keycode[i] <= 250)
+#endif
+ set_bit(atkbd->keycode[i], atkbd->dev.keybit);
+
+ input_register_device(&atkbd->dev);
+
+ printk(KERN_INFO "input: %s on %s\n", atkbd->name, serio->phys);
+}
+
+
+static struct serio_dev atkbd_dev = {
+ .interrupt = atkbd_interrupt,
+ .connect = atkbd_connect,
+ .disconnect = atkbd_disconnect,
+ .cleanup = atkbd_cleanup,
+};
+
+int __init pc98kbd_init(void)
+{
+ serio_register_device(&atkbd_dev);
+ return 0;
+}
+
+void __exit pc98kbd_exit(void)
+{
+ serio_unregister_device(&atkbd_dev);
+}
+
+module_init(pc98kbd_init);
+module_exit(pc98kbd_exit);
diff -urN linux/drivers/input/misc/pcspkr.c linux98/drivers/input/misc/pcspkr.c
--- linux/drivers/input/misc/pcspkr.c Mon Sep 16 11:18:31 2002
+++ linux98/drivers/input/misc/pcspkr.c Mon Sep 16 16:04:05 2002
@@ -12,6 +12,7 @@
* the Free Software Foundation
*/
+#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
@@ -23,7 +24,11 @@
MODULE_LICENSE("GPL");
static char pcspkr_name[] = "PC Speaker";
+#ifndef CONFIG_PC9800
static char pcspkr_phys[] = "isa0061/input0";
+#else
+static char pcspkr_phys[] = "isa3fdb/input0";
+#endif
static struct input_dev pcspkr_dev;
spinlock_t i8253_beep_lock = SPIN_LOCK_UNLOCKED;
@@ -43,11 +48,16 @@
}
if (value > 20 && value < 32767)
+#ifndef CONFIG_PC9800
count = 1193182 / value;
+#else
+ count = CLOCK_TICK_RATE / value;
+#endif
spin_lock_irqsave(&i8253_beep_lock, flags);
if (count) {
+#ifndef CONFIG_PC9800
/* enable counter 2 */
outb_p(inb_p(0x61) | 3, 0x61);
/* set command for counter 2, 2 byte write */
@@ -55,9 +65,23 @@
/* select desired HZ */
outb_p(count & 0xff, 0x42);
outb((count >> 8) & 0xff, 0x42);
+#else /* CONFIG_PC9800 */
+ outb(0x76, 0x3fdf);
+ outb(0, 0x5f);
+ outb(count & 0xff, 0x3fdb);
+ outb(0, 0x5f);
+ outb((count >> 8) & 0xff, 0x3fdb);
+ /* beep on */
+ outb(6, 0x37);
+#endif /* !CONFIG_PC9800 */
} else {
/* disable counter 2 */
+#ifndef CONFIG_PC9800
outb(inb_p(0x61) & 0xFC, 0x61);
+#else
+ /* beep off */
+ outb(7, 0x37);
+#endif
}
spin_unlock_irqrestore(&i8253_beep_lock, flags);
diff -urN linux/drivers/input/mouse/Config.in linux98/drivers/input/mouse/Config.in
--- linux/drivers/input/mouse/Config.in Wed Jul 17 08:49:29 2002
+++ linux98/drivers/input/mouse/Config.in Fri Jul 19 14:52:11 2002
@@ -7,6 +7,12 @@
dep_tristate ' PS/2 mouse' CONFIG_MOUSE_PS2 $CONFIG_INPUT $CONFIG_INPUT_MOUSE $CONFIG_SERIO
dep_tristate ' Serial mouse' CONFIG_MOUSE_SERIAL $CONFIG_INPUT $CONFIG_INPUT_MOUSE $CONFIG_SERIO
+if [ "$CONFIG_PC9800" = "y" ]; then
+ dep_tristate ' NEC PC-9801 busmouse' CONFIG_MOUSE_LOGIBM $CONFIG_INPUT $CONFIG_INPUT_MOUSE $CONFIG_ISA
+ if [ "$CONFIG_MOUSE_LOGIBM" != "n" ]; then
+ define_bool CONFIG_LOGIBUSMOUSE_PC9800 y
+ fi
+else
dep_tristate ' InPort/MS/ATIXL busmouse' CONFIG_MOUSE_INPORT $CONFIG_INPUT $CONFIG_INPUT_MOUSE $CONFIG_ISA
if [ "$CONFIG_MOUSE_INPORT" != "n" ]; then
bool ' ATI XL variant' CONFIG_MOUSE_ATIXL
@@ -22,3 +28,4 @@
if [ "$CONFIG_ARCH_ACORN" = "y" ]; then
dep_tristate ' Acorn RiscPC mouse' CONFIG_MOUSE_ACORN $CONFIG_INPUT $CONFIG_INPUT_MOUSE
fi
+fi
diff -urN linux/drivers/input/mouse/logibm.c linux98/drivers/input/mouse/logibm.c
--- linux/drivers/input/mouse/logibm.c Sat Oct 12 13:22:08 2002
+++ linux98/drivers/input/mouse/logibm.c Sat Oct 12 17:40:15 2002
@@ -38,6 +38,7 @@
#include <asm/io.h>
#include <asm/irq.h>
+#include <linux/config.h>
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/ioport.h>
@@ -48,6 +49,7 @@
MODULE_DESCRIPTION("Logitech busmouse driver");
MODULE_LICENSE("GPL");
+#ifndef CONFIG_LOGIBUSMOUSE_PC9800
#define LOGIBM_BASE 0x23c
#define LOGIBM_EXTENT 4
@@ -55,6 +57,15 @@
#define LOGIBM_SIGNATURE_PORT LOGIBM_BASE + 1
#define LOGIBM_CONTROL_PORT LOGIBM_BASE + 2
#define LOGIBM_CONFIG_PORT LOGIBM_BASE + 3
+#else /* CONFIG_LOGIBUSMOUSE_PC9800 */
+#define LOGIBM_BASE 0x7fd9
+#define LOGIBM_DATA_PORT LOGIBM_BASE + 0
+/* LOGIBM_SIGNATURE_PORT does not exist */
+#define LOGIBM_CONTROL_PORT LOGIBM_BASE + 4
+/* LOGIBM_INTERRUPT_PORT does not exist */
+#define LOGIBM_CONFIG_PORT LOGIBM_BASE + 6
+#define LOGIBM_EXTENT (-7)
+#endif /* !CONFIG_LOGIBUSMOUSE_PC9800 */
#define LOGIBM_ENABLE_IRQ 0x00
#define LOGIBM_DISABLE_IRQ 0x10
@@ -63,11 +74,24 @@
#define LOGIBM_READ_Y_LOW 0xc0
#define LOGIBM_READ_Y_HIGH 0xe0
+#ifndef CONFIG_LOGIBUSMOUSE_PC9800
#define LOGIBM_DEFAULT_MODE 0x90
#define LOGIBM_CONFIG_BYTE 0x91
#define LOGIBM_SIGNATURE_BYTE 0xa5
+#else /* CONFIG_LOGIBUSMOUSE_PC9800 */
+#define LOGIBM_DEFAULT_MODE 0x93
+/* LOGIBM_CONFIG_BYTE is not used */
+/* LOGIBM_SIGNATURE_BYTE is not used */
+
+#define LOGIBM_TIMER_PORT 0xbfdb
+#define LOGIBM_DEFAULT_TIMER_VAL 0x00
+#endif /* !CONFIG_LOGIBUSMOUSE_PC9800 */
+#ifndef CONFIG_LOGIBUSMOUSE_PC9800
#define LOGIBM_IRQ 5
+#else
+#define LOGIBM_IRQ 13
+#endif
MODULE_PARM(logibm_irq, "i");
@@ -104,7 +128,11 @@
.open = logibm_open,
.close = logibm_close,
.name = "Logitech bus mouse",
+#ifndef CONFIG_LOGIBUSMOUSE_PC9800
.phys = "isa023c/input0",
+#else
+ .phys = "isa7fd9/input0",
+#endif
.id = {
.bustype = BUS_ISA,
.vendor = 0x0003,
@@ -157,6 +185,18 @@
return -EBUSY;
}
+#ifdef CONFIG_LOGIBUSMOUSE_PC9800
+ if (!request_region(LOGIBM_TIMER_PORT, 1, "logibm")) {
+ printk(KERN_ERR "logibm.c: Can't allocate ports at %#x\n", LOGIBM_TIMER_PORT);
+ return -EBUSY;
+ }
+#endif
+
+#ifndef CONFIG_LOGIBUSMOUSE_PC9800
+ /* For PC-9800, necessary I/O ports are already reserved by
+ arch/i386/kernel/setup.c since mouse interface ALWAYS
+ exist on PC-9800. */
+
outb(LOGIBM_CONFIG_BYTE, LOGIBM_CONFIG_PORT);
outb(LOGIBM_SIGNATURE_BYTE, LOGIBM_SIGNATURE_PORT);
udelay(100);
@@ -166,10 +206,15 @@
printk(KERN_ERR "logibm.c: Didn't find Logitech busmouse at %#x\n", LOGIBM_BASE);
return -ENODEV;
}
+#endif /* CONFIG_LOGIBUSMOUSE_PC9800 */
outb(LOGIBM_DEFAULT_MODE, LOGIBM_CONFIG_PORT);
outb(LOGIBM_DISABLE_IRQ, LOGIBM_CONTROL_PORT);
+#ifdef CONFIG_LOGIBUSMOUSE_PC9800
+ outb(LOGIBM_DEFAULT_TIMER_VAL, LOGIBM_TIMER_PORT);
+#endif
+
input_register_device(&logibm_dev);
printk(KERN_INFO "input: Logitech bus mouse at %#x irq %d\n", LOGIBM_BASE, logibm_irq);
@@ -181,6 +226,9 @@
{
input_unregister_device(&logibm_dev);
release_region(LOGIBM_BASE, LOGIBM_EXTENT);
+#ifdef CONFIG_LOGIBUSMOUSE_PC9800
+ release_region(LOGIBM_TIMER_PORT, 1);
+#endif
}
module_init(logibm_init);
diff -urN linux/drivers/input/serio/Config.in linux98/drivers/input/serio/Config.in
--- linux/drivers/input/serio/Config.in Sat Oct 12 13:22:11 2002
+++ linux98/drivers/input/serio/Config.in Sun Oct 13 12:59:05 2002
@@ -21,3 +21,6 @@
if [ "$CONFIG_SA1111" = "y" ]; then
dep_tristate ' Intel SA1111 keyboard controller' CONFIG_SERIO_SA1111 $CONFIG_SERIO
fi
+if [ "$CONFIG_PC9800" = "y" ]; then
+ dep_tristate ' NEC PC-9801 keyboard controller' CONFIG_SERIO_98KBD $CONFIG_SERIO
+fi
diff -urN linux/drivers/input/serio/Makefile linux98/drivers/input/serio/Makefile
--- linux/drivers/input/serio/Makefile Sat Oct 12 13:21:30 2002
+++ linux98/drivers/input/serio/Makefile Sun Oct 13 12:59:59 2002
@@ -17,6 +17,7 @@
obj-$(CONFIG_SERIO_SA1111) += sa1111ps2.o
obj-$(CONFIG_SERIO_AMBAKMI) += ambakmi.o
obj-$(CONFIG_SERIO_Q40KBD) += q40kbd.o
+obj-$(CONFIG_SERIO_98KBD) += i8042-98.o
# The global Rules.make.
diff -urN linux/drivers/input/serio/i8042-98.c linux98/drivers/input/serio/i8042-98.c
--- linux/drivers/input/serio/i8042-98.c Thu Jan 1 09:00:00 1970
+++ linux98/drivers/input/serio/i8042-98.c Thu Oct 17 16:54:05 2002
@@ -0,0 +1,346 @@
+/*
+ * NEC PC-9801 keyboard controller driver for Linux
+ *
+ * Copyright (c) 1999-2002 Vojtech Pavlik
+ * Modify for NEC PC-9801 by Osamu Tomita <tomita@cinet.co.jp>
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <asm/io.h>
+
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/config.h>
+#include <linux/reboot.h>
+#include <linux/init.h>
+#include <linux/serio.h>
+#include <linux/sched.h>
+
+MODULE_AUTHOR("Osamu Tomita <tomita@cinet.co.jp>");
+MODULE_DESCRIPTION("NEC PC-9801 keyboard controller driver");
+MODULE_LICENSE("GPL");
+
+#undef DEBUG
+#include "i8042.h"
+
+spinlock_t i8042_lock = SPIN_LOCK_UNLOCKED;
+
+struct i8042_values {
+ int irq;
+ unsigned char disable;
+ unsigned char irqen;
+ unsigned char exists;
+ signed char mux;
+ unsigned char *name;
+ unsigned char *phys;
+};
+
+static struct serio i8042_kbd_port;
+static unsigned char i8042_initial_ctr;
+static unsigned char i8042_ctr;
+
+extern struct pt_regs *kbd_pt_regs;
+
+static void i8042_interrupt(int irq, void *dev_id, struct pt_regs *regs);
+
+/*
+ * The i8042_wait_read() and i8042_wait_write functions wait for the i8042 to
+ * be ready for reading values from it / writing values to it.
+ */
+
+#if 0
+static int i8042_wait_read(void)
+{
+ outb_p(0x00, 0x5f);
+ outb_p(0x00, 0x5f);
+ outb_p(0x00, 0x5f);
+ outb_p(0x00, 0x5f);
+ outb_p(0x00, 0x5f);
+ outb_p(0x00, 0x5f);
+ outb_p(0x00, 0x5f);
+ return 0;
+}
+#endif
+
+static int i8042_wait_write(void)
+{
+ outb_p(0x00, 0x5f);
+ outb_p(0x00, 0x5f);
+ outb_p(0x00, 0x5f);
+ outb_p(0x00, 0x5f);
+ outb_p(0x00, 0x5f);
+ outb_p(0x00, 0x5f);
+ outb_p(0x00, 0x5f);
+ return 0;
+}
+
+/*
+ * i8042_flush() flushes all data that may be in the keyboard and mouse buffers
+ * of the i8042 down the toilet.
+ */
+
+static int i8042_flush(void)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&i8042_lock, flags);
+
+ while (i8042_read_status() & 0x02) /* RxRDY */
+ i8042_read_data();
+
+ if (i8042_read_status() & 0x38)
+ printk("i8042-98: Keyboard error!\n");
+
+ spin_unlock_irqrestore(&i8042_lock, flags);
+
+ return 0;
+}
+
+/*
+ * i8042_kbd_write() sends a byte out through the keyboard interface.
+ */
+
+static int i8042_kbd_write(struct serio *port, unsigned char c)
+{
+ unsigned long flags;
+ int retval = 0;
+
+ spin_lock_irqsave(&i8042_lock, flags);
+
+ if(!(retval = i8042_wait_write())) {
+ dbg("%02x -> i8042-98 (kbd-data)", c);
+ i8042_write_data(c);
+ }
+
+ spin_unlock_irqrestore(&i8042_lock, flags);
+
+ return retval;
+}
+
+/*
+ * i8042_open() is called when a port is open by the higher layer.
+ * It allocates the interrupt and enables in in the chip.
+ */
+
+static int i8042_open(struct serio *port)
+{
+ struct i8042_values *values = port->driver;
+
+ i8042_flush();
+
+ if (request_irq(values->irq, i8042_interrupt, 0, "i8042-98", NULL)) {
+ printk(KERN_ERR "i8042-98.c: Can't get irq %d for %s, unregistering the port.\n", values->irq, values->name);
+ values->exists = 0;
+ serio_unregister_port(port);
+ return -1;
+ }
+
+ i8042_ctr |= values->irqen;
+
+ return 0;
+}
+
+/*
+ * i8042_close() frees the interrupt, so that it can possibly be used
+ * by another driver. We never know - if the user doesn't have a mouse,
+ * the BIOS could have used the AUX interupt for PCI.
+ */
+
+static void i8042_close(struct serio *port)
+{
+ struct i8042_values *values = port->driver;
+
+ i8042_ctr &= ~values->irqen;
+
+ free_irq(values->irq, NULL);
+
+ i8042_flush();
+}
+
+/*
+ * Structures for registering the devices in the serio.c module.
+ */
+
+static struct i8042_values i8042_kbd_values = {
+ .irqen = I8042_CTR_KBDINT,
+ .disable = I8042_CTR_KBDDIS,
+ .name = "KBD",
+ .mux = -1,
+};
+
+static struct serio i8042_kbd_port =
+{
+ .type = SERIO_8042,
+ .write = i8042_kbd_write,
+ .open = i8042_open,
+ .close = i8042_close,
+ .driver = &i8042_kbd_values,
+ .name = "PC-9801 Kbd Port",
+ .phys = I8042_KBD_PHYS_DESC,
+};
+
+/*
+ * i8042_interrupt() is the most important function in this driver -
+ * it handles the interrupts from the i8042, and sends incoming bytes
+ * to the upper layers.
+ */
+
+static void i8042_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ unsigned long flags;
+ unsigned char data;
+
+#ifdef CONFIG_VT
+ kbd_pt_regs = regs;
+#endif
+
+ spin_lock_irqsave(&i8042_lock, flags);
+
+ data = i8042_read_data();
+ spin_unlock_irqrestore(&i8042_lock, flags);
+ serio_interrupt(&i8042_kbd_port, data, 0);
+
+}
+
+/*
+ * i8042_controller init initializes the i8042 controller, and,
+ * most importantly, sets it into non-xlated mode if that's
+ * desired.
+ */
+
+static int __init i8042_controller_init(void)
+{
+
+/*
+ * Test the i8042. We need to know if it thinks it's working correctly
+ * before doing anything else.
+ */
+
+ i8042_flush();
+
+ i8042_initial_ctr = i8042_ctr;
+
+/*
+ * Disable the keyboard interface and interrupt.
+ */
+
+ i8042_ctr |= I8042_CTR_KBDDIS;
+ i8042_ctr &= ~I8042_CTR_KBDINT;
+
+/*
+ * Set nontranslated mode for the kbd interface if requested by an option.
+ * After this the kbd interface becomes a simple serial in/out, like the aux
+ * interface is. We don't do this by default, since it can confuse notebook
+ * BIOSes.
+ */
+
+ i8042_ctr &= ~I8042_CTR_XLATE; /* i8042_direct = 1; */
+
+ return 0;
+}
+
+/*
+ * Here we try to reset everything back to a state in which the BIOS will be
+ * able to talk to the hardware when rebooting.
+ */
+
+void i8042_controller_cleanup(void)
+{
+ i8042_flush();
+
+/*
+ * Reset anything that is connected to the ports.
+ */
+
+ if (i8042_kbd_values.exists)
+ serio_cleanup(&i8042_kbd_port);
+
+/*
+ * Restore the original control register setting.
+ */
+
+ i8042_ctr = i8042_initial_ctr;
+
+}
+
+/*
+ * i8042_port_register() marks the device as existing,
+ * registers it, and reports to the user.
+ */
+
+static int __init i8042_port_register(struct i8042_values *values, struct serio *port)
+{
+ values->exists = 1;
+
+ i8042_ctr &= ~values->disable;
+
+ serio_register_port(port);
+
+ printk(KERN_INFO "serio: i8042-98 %s port at %#lx,%#lx irq %d\n",
+ values->name,
+ (unsigned long) I8042_DATA_REG,
+ (unsigned long) I8042_COMMAND_REG,
+ values->irq);
+
+ return 0;
+}
+
+/*
+ * We need to reset the 8042 back to original mode on system shutdown,
+ * because otherwise BIOSes will be confused.
+ */
+
+static int i8042_notify_sys(struct notifier_block *this, unsigned long code,
+ void *unused)
+{
+ if (code==SYS_DOWN || code==SYS_HALT)
+ i8042_controller_cleanup();
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block i8042_notifier=
+{
+ i8042_notify_sys,
+ NULL,
+ 0
+};
+
+int __init i8042_98init(void)
+{
+ dbg_init();
+
+ if (i8042_platform_init())
+ return -EBUSY;
+
+ i8042_kbd_values.irq = I8042_KBD_IRQ;
+
+ if (i8042_controller_init())
+ return -ENODEV;
+
+ i8042_port_register(&i8042_kbd_values, &i8042_kbd_port);
+
+ register_reboot_notifier(&i8042_notifier);
+
+ return 0;
+}
+
+void __exit i8042_98exit(void)
+{
+ unregister_reboot_notifier(&i8042_notifier);
+
+ i8042_controller_cleanup();
+
+ if (i8042_kbd_values.exists)
+ serio_unregister_port(&i8042_kbd_port);
+
+ i8042_platform_exit();
+}
+
+module_init(i8042_98init);
+module_exit(i8042_98exit);
diff -urN linux/drivers/input/serio/i8042-98io.h linux98/drivers/input/serio/i8042-98io.h
--- linux/drivers/input/serio/i8042-98io.h Thu Jan 1 09:00:00 1970
+++ linux98/drivers/input/serio/i8042-98io.h Sun Oct 13 13:21:58 2002
@@ -0,0 +1,74 @@
+#ifndef _I8042_IO_H
+#define _I8042_IO_H
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+/*
+ * Names.
+ */
+
+#define I8042_KBD_PHYS_DESC "isa0041/serio0"
+#define I8042_AUX_PHYS_DESC "isa0041/serio1"
+#define I8042_MUX_PHYS_DESC "isa0041/serio%d"
+
+/*
+ * IRQs.
+ */
+
+#define I8042_KBD_IRQ 1
+#define I8042_AUX_IRQ 0 /* nothing */
+
+/*
+ * Register numbers.
+ */
+
+#define I8042_COMMAND_REG 0x43
+#define I8042_STATUS_REG 0x43
+#define I8042_DATA_REG 0x41
+
+static inline int i8042_read_data(void)
+{
+ return inb(I8042_DATA_REG);
+}
+
+static inline int i8042_read_status(void)
+{
+ return inb(I8042_STATUS_REG);
+}
+
+static inline void i8042_write_data(int val)
+{
+ outb(0, 0x5f); /* wait */
+ outb(0x17, I8042_COMMAND_REG); /* enable send command */
+ outb(0, 0x5f); /* wait */
+ outb(val, I8042_DATA_REG);
+ outb(0, 0x5f); /* wait */
+ outb(0x16, I8042_COMMAND_REG); /* disable send command */
+ outb(0, 0x5f); /* wait */
+ return;
+}
+
+static inline void i8042_write_command(int val)
+{
+ outb(val, I8042_COMMAND_REG);
+ return;
+}
+
+static inline int i8042_platform_init(void)
+{
+/*
+ * On ix86 platforms touching the i8042 data register region can do really
+ * bad things. Because of this the region is always reserved on ix86 boxes.
+ */
+ return 0;
+}
+
+static inline void i8042_platform_exit(void)
+{
+}
+
+#endif /* _I8042_IO_H */
diff -urN linux/drivers/input/serio/i8042.h linux98/drivers/input/serio/i8042.h
--- linux/drivers/input/serio/i8042.h Sat Oct 12 13:22:17 2002
+++ linux98/drivers/input/serio/i8042.h Sun Oct 13 13:30:09 2002
@@ -17,6 +17,8 @@
#include "i8042-ppcio.h"
#elif defined(CONFIG_SPARC32) || defined(CONFIG_SPARC64)
#include "i8042-sparcio.h"
+#elif defined(CONFIG_PC9800)
+#include "i8042-98io.h"
#else
#include "i8042-io.h"
#endif
diff -urN linux/include/linux/input.h linux98/include/linux/input.h
--- linux/include/linux/input.h Sat Oct 12 13:22:06 2002
+++ linux98/include/linux/input.h Sat Oct 12 14:18:54 2002
@@ -9,6 +9,7 @@
* the Free Software Foundation.
*/
+#include <linux/config.h>
#ifdef __KERNEL__
#include <linux/time.h>
#include <linux/list.h>
@@ -134,7 +135,11 @@
#define KEY_LEFTBRACE 26
#define KEY_RIGHTBRACE 27
#define KEY_ENTER 28
+#ifndef CONFIG_PC9800
#define KEY_LEFTCTRL 29
+#else
+#define KEY_LEFTCTRL 116
+#endif
#define KEY_A 30
#define KEY_S 31
#define KEY_D 32
@@ -147,7 +152,11 @@
#define KEY_SEMICOLON 39
#define KEY_APOSTROPHE 40
#define KEY_GRAVE 41
+#ifndef CONFIG_PC9800
#define KEY_LEFTSHIFT 42
+#else
+#define KEY_LEFTSHIFT 112
+#endif
#define KEY_BACKSLASH 43
#define KEY_Z 44
#define KEY_X 45
@@ -161,9 +170,17 @@
#define KEY_SLASH 53
#define KEY_RIGHTSHIFT 54
#define KEY_KPASTERISK 55
+#ifndef CONFIG_PC9800
#define KEY_LEFTALT 56
+#else
+#define KEY_LEFTALT 115
+#endif
#define KEY_SPACE 57
+#ifndef CONFIG_PC9800
#define KEY_CAPSLOCK 58
+#else
+#define KEY_CAPSLOCK 113
+#endif
#define KEY_F1 59
#define KEY_F2 60
#define KEY_F3 61
@@ -204,7 +221,11 @@
#define KEY_KPENTER 96
#define KEY_RIGHTCTRL 97
#define KEY_KPSLASH 98
+#ifndef CONFIG_PC9800
#define KEY_SYSRQ 99
+#else
+#define KEY_SYSRQ 96
+#endif
#define KEY_RIGHTALT 100
#define KEY_LINEFEED 101
#define KEY_HOME 102
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Wed Oct 23 2002 - 22:00:34 EST