patch 7 of 10
The whole set can be grabbed via anonymous cvs (empty password):
cvs -d:pserver:anonymous@cvs.cciss.sourceforge.net:/cvsroot/cciss login
cvs -z3 -d:pserver:anonymous@cvs.cciss.sourceforge.net:/cvsroot/cciss co 2.5.44
DESC
Factor out duplicated read capacity code into common routine
drivers/block/cciss.c | 96 ++++++++++++++++----------------------------------
1 files changed, 31 insertions, 65 deletions
--- linux-2.5.44/drivers/block/cciss.c~factor_duped_code Mon Oct 21 12:06:02 2002
+++ linux-2.5.44-root/drivers/block/cciss.c Mon Oct 21 12:06:02 2002
@@ -113,6 +113,9 @@ static void cciss_getgeometry(int cntl_n
static inline void addQ(CommandList_struct **Qptr, CommandList_struct *c);
static void start_io( ctlr_info_t *h);
+static int sendcmd( __u8 cmd, int ctlr, void *buff, size_t size,
+ unsigned int use_unit_num, unsigned int log_unit, __u8 page_code,
+ unsigned char *scsi3addr);
#ifdef CONFIG_PROC_FS
static int cciss_proc_get_info(char *buffer, char **start, off_t offset,
@@ -1002,6 +1005,30 @@ case CMD_HARDWARE_ERR:
return(return_status);
}
+static void
+cciss_read_capacity(int ctlr, int logvol, ReadCapdata_struct *buf,
+ int withirq, unsigned int *total_size, unsigned int *block_size)
+{
+ int return_code;
+ memset(buf, 0, sizeof(*buf));
+ if (withirq)
+ return_code = sendcmd_withirq(CCISS_READ_CAPACITY,
+ ctlr, buf, sizeof(*buf), 1, logvol, 0 );
+ else
+ return_code = sendcmd(CCISS_READ_CAPACITY,
+ ctlr, buf, sizeof(*buf), 1, logvol, 0, NULL );
+ if (return_code == IO_OK) {
+ *total_size = be32_to_cpu(*((__u32 *) &buf->total_size[0]))+1;
+ *block_size = be32_to_cpu(*((__u32 *) &buf->block_size[0]));
+ } else { /* read capacity command failed */
+ printk(KERN_WARNING "cciss: read capacity failed\n");
+ *total_size = 0;
+ *block_size = BLOCK_SIZE;
+ }
+ printk(KERN_INFO " blocks= %d block_size= %d\n",
+ *total_size, *block_size);
+ return;
+}
static int register_new_disk(int ctlr)
{
struct gendisk *disk;
@@ -1148,38 +1175,8 @@ static int register_new_disk(int ctlr)
/* there could be gaps in lun numbers, track hightest */
if(hba[ctlr]->highest_lun < lunid)
hba[ctlr]->highest_lun = logvol;
-
- memset(size_buff, 0, sizeof(ReadCapdata_struct));
- return_code = sendcmd_withirq(CCISS_READ_CAPACITY, ctlr, size_buff,
- sizeof( ReadCapdata_struct), 1, logvol, 0 );
- if (return_code == IO_OK)
- {
- total_size = (0xff &
- (unsigned int)(size_buff->total_size[0])) << 24;
- total_size |= (0xff &
- (unsigned int)(size_buff->total_size[1])) << 16;
- total_size |= (0xff &
- (unsigned int)(size_buff->total_size[2])) << 8;
- total_size |= (0xff & (unsigned int)
- (size_buff->total_size[3]));
- total_size++; // command returns highest block address
-
- block_size = (0xff &
- (unsigned int)(size_buff->block_size[0])) << 24;
- block_size |= (0xff &
- (unsigned int)(size_buff->block_size[1])) << 16;
- block_size |= (0xff &
- (unsigned int)(size_buff->block_size[2])) << 8;
- block_size |= (0xff &
- (unsigned int)(size_buff->block_size[3]));
- } else /* read capacity command failed */
- {
- printk(KERN_WARNING "cciss: read capacity failed\n");
- total_size = 0;
- block_size = BLOCK_SIZE;
- }
- printk(KERN_INFO " blocks= %u block_size= %d\n",
- total_size, block_size);
+ cciss_read_capacity(ctlr, logvol, size_buff, 1,
+ &total_size, &block_size);
/* Execute the command to read the disk geometry */
memset(inq_buff, 0, sizeof(InquiryData_struct));
return_code = sendcmd_withirq(CISS_INQUIRY, ctlr, inq_buff,
@@ -2175,39 +2172,8 @@ static void cciss_getgeometry(int cntl_n
ld_buff->LUN[i][0], ld_buff->LUN[i][1],ld_buff->LUN[i][2],
ld_buff->LUN[i][3], hba[cntl_num]->drv[i].LunID);
#endif /* CCISS_DEBUG */
-
- memset(size_buff, 0, sizeof(ReadCapdata_struct));
- return_code = sendcmd(CCISS_READ_CAPACITY, cntl_num, size_buff,
- sizeof( ReadCapdata_struct), 1, i, 0, NULL );
- if (return_code == IO_OK)
- {
- total_size = (0xff &
- (unsigned int)(size_buff->total_size[0])) << 24;
- total_size |= (0xff &
- (unsigned int)(size_buff->total_size[1])) << 16;
- total_size |= (0xff &
- (unsigned int)(size_buff->total_size[2])) << 8;
- total_size |= (0xff & (unsigned int)
- (size_buff->total_size[3]));
- total_size++; // command returns highest block address
-
- block_size = (0xff &
- (unsigned int)(size_buff->block_size[0])) << 24;
- block_size |= (0xff &
- (unsigned int)(size_buff->block_size[1])) << 16;
- block_size |= (0xff &
- (unsigned int)(size_buff->block_size[2])) << 8;
- block_size |= (0xff &
- (unsigned int)(size_buff->block_size[3]));
- } else /* read capacity command failed */
- {
- printk(KERN_WARNING "cciss: read capacity failed\n");
- total_size = 0;
- block_size = BLOCK_SIZE;
- }
- printk(KERN_INFO " blocks= %d block_size= %d\n",
- total_size, block_size);
-
+ cciss_read_capacity(cntl_num, i, size_buff, 0,
+ &total_size, &block_size);
/* Execute the command to read the disk geometry */
memset(inq_buff, 0, sizeof(InquiryData_struct));
return_code = sendcmd(CISS_INQUIRY, cntl_num, inq_buff,
.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Wed Oct 23 2002 - 22:01:04 EST