Re: [vortex-bug] 3Com Cardbus 3CXFE575CT IRQ Problems

From: Dionysius Wilson Almeida (dwilson@yenveedu.com)
Date: Thu Oct 24 2002 - 15:49:14 EST


On Fri, 2002-10-25 at 02:11, Donald Becker wrote:
> On 24 Oct 2002, Dionysius Wilson Almeida wrote:
>
> > I'm running Debian Woody with kernel 2.4.19 with cardbus and hotplug
> > support. I've a 3Com 3CXFE575CT pcmcia card and I'm trying to get it to
> > work on my system. It seems that the card is unable to find a usable
> > IRQ.
>
> As you likely already know, this is a kernel / BIOS issue, not a 3Com
> driver issue. This problem will exist with any CardBus card that uses
> interrupts (almost every device).
>
> > I've disabled Plug-n-Play in the BIOS of my Sony VAIO PCG-FX140
> > Laptop but still the card is not able to get any usable IRQs. I also
> > booted with pci=biosirq but still no progress.
>
> You can also try "noapic", although that's almost never a issue on a
> laptop. (It's more likely to be an issue on a desktop with a
> PCI-CardBus adapter.)
I will try this "noapic" and see if that helps.

> > 00:00.0 Host bridge: Intel Corp. 82815 815 Chipset Host Bridge and
> > Memory Controller Hub (rev 11)
> > Subsystem: Sony Corporation: Unknown device 80df
> ...
> > 00:1e.0 PCI bridge: Intel Corp. 82801BAM/CAM PCI Bridge (rev 03)
> > (prog-if 00 [Normal decode])
> > Flags: bus master, fast devsel, latency 0
> > Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
> ...
> > 01:00.0 FireWire (IEEE 1394): Texas Instruments TSB43AA22 IEEE-1394
>
> Does the FireWire work properly? It's sitting on the same secondary PCI
> bus as the CardBus.
>
Yeah the firewire disk works fine when Plug-n-Play in the BIOS is
disabled.

> > 01:02.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 80)
> > Subsystem: Sony Corporation: Unknown device 80df
> ...
> > Bus: primary=01, secondary=02, subordinate=05, sec-latency=176
> > 01:02.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 80)
> > Subsystem: Sony Corporation: Unknown device 80df
> ..
> > 01:08.0 Ethernet controller: Intel Corp. 82801BA/BAM/CA/CAM Ethernet
> > Controller (rev 03)
> > Subsystem: Intel Corp.: Unknown device 3013
> > Flags: bus master, medium devsel, latency 66, IRQ 9
>
> Presumably this is work fine as well.
Yeah the in-built ethernet controller works fine too.

thanks for your inputs...

regards,

-Wilson

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Thu Oct 31 2002 - 22:00:25 EST