more aic7xxx boot failure

From: Hanna Linder (hannal@us.ibm.com)
Date: Thu Oct 24 2002 - 17:25:19 EST

> 2.5 Kernel Problem Reports as of 22 Oct
> Status Discussion Problem Title
>
> open 04 Oct 2002 AIC7XXX boot failure
> 1. http://marc.theaimsgroup.com/?l=linux-kernel&m=103356254615324&w=2
>

This may be a different problem but it is related to the aic7xxx
driver. My system is a 2-way PIII 500MHz 2.5GB RAM box. It boots
if I remove the aic7xxx driver. This is on 2.5.44 btw. Works fine
on 2.4.x.

Here is the output from lspci -v -v:

00:06.0 SCSI storage controller: Adaptec AHA-2940U/UW / AHA-39xx / AIC-7895 (rev 04)
        Subsystem: Adaptec AHA-2940U/2940UW Dual AHA-394xAU/AUW/AUWD AIC-7895B
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 80 (2000ns min, 2000ns max)
        Interrupt: pin A routed to IRQ 15
        Region 0: I/O ports at 2200 [disabled] [size=256]
        Region 1: Memory at febfe000 (32-bit, non-prefetchable) [size=4K]
        Expansion ROM at <unassigned> [disabled] [size=64K]
        Capabilities: [dc] Power Management version 1
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:06.1 SCSI storage controller: Adaptec AHA-2940U/UW / AHA-39xx / AIC-7895 (rev 04)
        Subsystem: Adaptec AHA-2940U/2940UW Dual AHA-394xAU/AUW/AUWD AIC-7895B
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 80 (2000ns min, 2000ns max)
        Interrupt: pin B routed to IRQ 10
        Region 0: I/O ports at 2300 [disabled] [size=256]
        Region 1: Memory at febfd000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [dc] Power Management version 1
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

This archive was generated by hypermail 2b29 : Thu Oct 31 2002 - 22:00:25 EST