Hanna Linder <hannal@us.ibm.com> writes:
> --On Thursday, October 24, 2002 15:46:56 -0700 Philippe Troin <phil@fifi.org> wrote:
>
> >
> > Have you tried booting with "noapic"?
>
> Just did, That solves the problem too.
>
>
> > What error do you get on boot?
>
> a kernel panic and scsi_abort error 0x2 (from what
> I remember flying by)
>
> Would have to hookup with a serial cable to get all
> the data. Here is what I can see on the screen:
>
> LASTPHASE = 0x1, SCSISIGI = 0x0, SXFRCTL0 = 0x0
> SSTAT0 = 0x0, SSTAT1 = 0x8
> STACK == 0x17, 0x0, 0x0, 0x0
> SCB count = 4
> Kernel NEXQSCB = 3
> Card NEXTQSCB = 0
> QINFIFO entries: 3 2
> a list of Waiting Queue entries
> and a list of Disconnected Queue entries.
> QUOTFIFI entries:
> Sequencer Free SCB List: 0 to 31
> Pending list: 2
> Kernel Free SCB list: 1 0
> Untagged Q(0): 2
> DevQ(0:0:0):0 waiting
> qinpos = 0, SCB index = 3
> Kernel panic: Loop 1
Had the same problem.
Booted noapic, problem solved...
Now, if the driver could be fixed, that would be nicer...
Phil.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Thu Oct 31 2002 - 22:00:25 EST