Cajoline writes:
> I recently setup a box with the following components:
> Intel Celeron 1300 MHz
> ASUS TUSL2-C motherboard
> 2 x Promise Ultra100 TX2 controllers
I have a CUSL2-C board, P3-800 Coppermine and a Ultra133TX2 controller.
> Any 2.4 kernel I have tried on this machine displays this strange
> a
> behavior: any drives attached to the PDC controllers only work at udma
> mode 2 (UDMA33).
I have the same problem. This is a known problem in the vanilla kernels
(still in 2.4.20-pre11). You can force the right UDMA setting by giving
a "ideX=ata66" kernel boot parameter, where the "X" is your interface
number. This is fixed in recent -ac kernels (I tested with
2.4.20-pre10-ac2).
> What's even funnier is that if I try to copy files from a
> filesystem on
> a
>
> drive attached to a PDC20268 and a drive attached to the motherboard
> controller (PIIX4 chipset), the system eventually locks up
> (after about
> 3
> GB).
> What I mean by this is that there are no errors whatsoever, from the
> kernel ide driver, from the filesystem, nothing at all. It just stops
> responding to anything: login at the console, shell commands, network
> daemons, everything stops working. You can't even reboot it - a hard
> reset
> is required.
This is nasty, I experience this too. This is different from the problem
you describe earlier. I already checked different recent kernels, BIOS
versions, NICs, memory, processors, and still it hangs. I suspect it's a
unknown bug in the driver or a hardware bug in the controller. The
problem is that it hangs completely dead, giving no information to start
debugging. :(
> So I have come to the conclusion there must be some rather bizarre
>
> incompatibility between the PDCs and this motherboard.
> Let me note that the PDC controllers do work just fine with
> other older
> motherboards.
Like you, I also have other boxes with Promise Ultra66/100/133
controllers, with _different_ motherboards, which indeed don't have such
problem, so the combination of motherboard <-> controller looks
important here.
> And another thing, during boot-up, the PDCs do show the
> drives attached to it, detected at the right udma mode.
Ditto.
> I was wondering if anyone has come across this specific problem. I
> browsed
>
> thoroughly through the list archives, but I didn't find any mention of
> the
> specific motherboard, or even the PIIX4 chipset and these controllers.
> I know there is probably no way I can get this hardware to work
> together,
> yet I'm curious to know if this has occurred to someone else as well.
Well, it has. And I'm still hoping to solve this one. I an open to any
suggestions, patches or tests.
Regards,
- Robbert Kouprie
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Thu Oct 31 2002 - 22:00:30 EST