This patch adds SMP support for PC-9800.
diffstat:
arch/i386/kernel/apic.c | 16 +++++++++++++---
arch/i386/kernel/io_apic.c | 25 +++++++++++++++++++++++--
arch/i386/kernel/mpparse.c | 35 ++++++++++++++++++++++++++++++++++-
arch/i386/kernel/smpboot.c | 14 ++++++++++++++
include/asm-i386/mpspec.h | 4 +++-
include/asm-i386/smpboot.h | 9 +++++++++
6 files changed, 96 insertions(+), 7 deletions(-)
-- Osamu Tomita
diff -urN linux/arch/i386/kernel/apic.c linux98/arch/i386/kernel/apic.c --- linux/arch/i386/kernel/apic.c Wed Oct 16 13:20:29 2002 +++ linux98/arch/i386/kernel/apic.c Wed Oct 16 15:40:20 2002 @@ -33,6 +33,8 @@ #include <asm/arch_hooks.h> #include "mach_apic.h" +#include "io_ports.h" + void __init apic_intr_init(void) { #ifdef CONFIG_SMP @@ -135,9 +137,13 @@ * PIC mode, enable APIC mode in the IMCR, i.e. * connect BSP's local APIC to INT and NMI lines. */ +#ifndef CONFIG_PC9800 printk("leaving PIC mode, enabling APIC mode.\n"); outb(0x70, 0x22); outb(0x01, 0x23); +#else + printk("On NEC98, Changing mode from PIC to APIC isNOT supported yet.\n"); +#endif } } @@ -150,9 +156,13 @@ * interrupts, including IPIs, won't work beyond * this point! The only exception are INIT IPIs. */ +#ifndef CONFIG_PC9800 printk("disabling APIC mode, entering PIC mode.\n"); outb(0x70, 0x22); outb(0x00, 0x23); +#else + printk("On NEC98, Changing mode from APIC to PIC isNOT supported yet.\n"); +#endif } } @@ -759,9 +769,9 @@ spin_lock_irqsave(&i8253_lock, flags); - outb_p(0x00, 0x43); - count = inb_p(0x40); - count |= inb_p(0x40) << 8; + outb_p(0x00, PIT_MODE); + count = inb_p(PIT_CH0); + count |= inb_p(PIT_CH0) << 8; spin_unlock_irqrestore(&i8253_lock, flags); diff -urN linux/arch/i386/kernel/io_apic.c linux98/arch/i386/kernel/io_apic.c --- linux/arch/i386/kernel/io_apic.c Sat Oct 19 13:01:22 2002 +++ linux98/arch/i386/kernel/io_apic.c Sat Oct 19 16:22:51 2002 @@ -37,6 +37,8 @@ #include <asm/desc.h> #include "mach_apic.h" +#include "io_ports.h" + #undef APIC_LOCKUP_DEBUG #define APIC_LOCKUP_DEBUG @@ -354,7 +356,9 @@ if ((mp_bus_id_to_type[lbus] == MP_BUS_ISA || mp_bus_id_to_type[lbus] == MP_BUS_EISA || - mp_bus_id_to_type[lbus] == MP_BUS_MCA) && + mp_bus_id_to_type[lbus] == MP_BUS_MCA || + mp_bus_id_to_type[lbus] == MP_BUS_NEC98 + ) && (mp_irqs[i].mpc_irqtype == type) && (mp_irqs[i].mpc_srcbusirq == irq)) @@ -448,6 +452,12 @@ #define default_MCA_trigger(idx) (1) #define default_MCA_polarity(idx) (0) +/* NEC98 interrupts are always polarity zero edge triggered, + * when listed as conforming in the MP table. */ + +#define default_NEC98_trigger(idx) (0) +#define default_NEC98_polarity(idx) (0) + static int __init MPBIOS_polarity(int idx) { int bus = mp_irqs[idx].mpc_srcbus; @@ -482,6 +492,11 @@ polarity = default_MCA_polarity(idx); break; } + case MP_BUS_NEC98: /* NEC 98 pin */ + { + polarity = default_NEC98_polarity(idx); + break; + } default: { printk(KERN_WARNING "broken BIOS!!\n"); @@ -551,6 +566,11 @@ trigger = default_MCA_trigger(idx); break; } + case MP_BUS_NEC98: /* NEC 98 pin */ + { + trigger = default_NEC98_trigger(idx); + break; + } default: { printk(KERN_WARNING "broken BIOS!!\n"); @@ -612,6 +632,7 @@ case MP_BUS_ISA: /* ISA pin */ case MP_BUS_EISA: case MP_BUS_MCA: + case MP_BUS_NEC98: { irq = mp_irqs[idx].mpc_srcbusirq; break; @@ -1718,7 +1739,7 @@ * Additionally, something is definitely wrong with irq9 * on PIIX4 boards. */ -#define PIC_IRQS (1<<2) +#define PIC_IRQS (1 << PIC_CASCADE_IR) void __init setup_IO_APIC(void) { diff -urN linux/arch/i386/kernel/mpparse.c linux98/arch/i386/kernel/mpparse.c --- linux/arch/i386/kernel/mpparse.c Wed Oct 16 13:20:29 2002 +++ linux98/arch/i386/kernel/mpparse.c Wed Oct 16 15:40:20 2002 @@ -236,6 +236,8 @@ mp_current_pci_id++; } else if (strncmp(str, BUSTYPE_MCA, sizeof(BUSTYPE_MCA)-1) == 0) { mp_bus_id_to_type[m->mpc_busid] = MP_BUS_MCA; + } else if (strncmp(str, BUSTYPE_NEC98, sizeof(BUSTYPE_NEC98)-1) == 0) { + mp_bus_id_to_type[m->mpc_busid] = MP_BUS_NEC98; } else { printk("Unknown bustype %s - ignoring\n", str); } @@ -681,7 +683,12 @@ * Read the physical hardware table. Anything here will * override the defaults. */ - if (!smp_read_mpc((void *)mpf->mpf_physptr)) { +#ifndef CONFIG_PC9800 + if (!smp_read_mpc((void *)mpf->mpf_physptr)) +#else + if (!smp_read_mpc(phys_to_virt(mpf->mpf_physptr))) +#endif + { smp_found_config = 0; printk(KERN_ERR "BIOS bug, MP table errors detected!...\n"); printk(KERN_ERR "... disabling SMP support. (tell your hw vendor)\n"); @@ -735,8 +742,30 @@ printk("found SMP MP-table at %08lx\n", virt_to_phys(mpf)); reserve_bootmem(virt_to_phys(mpf), PAGE_SIZE); +#ifndef CONFIG_PC9800 if (mpf->mpf_physptr) reserve_bootmem(mpf->mpf_physptr, PAGE_SIZE); +#else + /* + * PC-9800's MPC table places on the very last of + * physical memory; so that simply reserving PAGE_SIZE + * from mpg->mpf_physptr yields BUG() in + * reserve_bootmem. + */ + if (mpf->mpf_physptr) { + /* + * We cannot access to MPC table to compute + * table size yet, as only few megabytes from + * the bottom is mapped now. + */ + unsigned long size = PAGE_SIZE; + unsigned long end = max_low_pfn * PAGE_SIZE; + if (mpf->mpf_physptr + size > end) + size = end - mpf->mpf_physptr; + reserve_bootmem(mpf->mpf_physptr, size); + } +#endif + mpf_found = mpf; return 1; } @@ -748,7 +777,9 @@ void __init find_smp_config (void) { +#ifndef CONFIG_PC9800 unsigned int address; +#endif /* * FIXME: Linux assumes you have 640K of base ram.. @@ -762,6 +793,7 @@ smp_scan_config(639*0x400,0x400) || smp_scan_config(0xF0000,0x10000)) return; +#ifndef CONFIG_PC9800 /* PC-9800 has no EBDA area? */ /* * If it is an SMP machine we should know now, unless the * configuration is in an EISA/MCA bus machine with an @@ -784,6 +816,7 @@ smp_scan_config(address, 0x400); if (smp_found_config) printk(KERN_WARNING "WARNING: MP table in the EBDA can be UNSAFE, contact linux-smp@vger.kernel.org if you experience SMP problems!\n"); +#endif } diff -urN linux/arch/i386/kernel/smpboot.c linux98/arch/i386/kernel/smpboot.c --- linux/arch/i386/kernel/smpboot.c Tue Nov 5 10:16:18 2002 +++ linux98/arch/i386/kernel/smpboot.c Wed Nov 6 11:00:03 2002 @@ -856,13 +856,27 @@ nmi_low = *((volatile unsigned short *) TRAMPOLINE_LOW); } +#ifndef CONFIG_PC9800 CMOS_WRITE(0xa, 0xf); +#else + /* reset code is stored in 8255 on PC-9800. */ + outb(0x0e, 0x37); /* SHUT0 = 0 */ +#endif local_flush_tlb(); Dprintk("1.\n"); *((volatile unsigned short *) TRAMPOLINE_HIGH) = start_eip >> 4; Dprintk("2.\n"); *((volatile unsigned short *) TRAMPOLINE_LOW) = start_eip & 0xf; Dprintk("3.\n"); +#ifdef CONFIG_PC9800 + /* + * On PC-9800, continuation on warm reset is done by loading + * %ss:%sp from 0x0000:0404 and executing 'lret', so: + */ + /* 0x3f0 is on unused interrupt vector and should be safe... */ + *((volatile unsigned long *) phys_to_virt(0x404)) = 0x000003f0; + Dprintk("4.\n"); +#endif /* * Be paranoid about clearing APIC errors. diff -urN linux/include/asm-i386/mpspec.h linux98/include/asm-i386/mpspec.h --- linux/include/asm-i386/mpspec.h Fri Apr 12 13:58:13 2002 +++ linux98/include/asm-i386/mpspec.h Fri Apr 12 14:02:42 2002 @@ -105,6 +105,7 @@ #define BUSTYPE_TC "TC" #define BUSTYPE_VME "VME" #define BUSTYPE_XPRESS "XPRESS" +#define BUSTYPE_NEC98 "NEC98" struct mpc_config_ioapic { @@ -195,7 +196,8 @@ MP_BUS_ISA = 1, MP_BUS_EISA, MP_BUS_PCI, - MP_BUS_MCA + MP_BUS_MCA, + MP_BUS_NEC98 }; extern int mp_bus_id_to_type [MAX_MP_BUSSES]; extern int mp_bus_id_to_node [MAX_MP_BUSSES]; diff -urN linux/include/asm-i386/smpboot.h linux98/include/asm-i386/smpboot.h --- linux/include/asm-i386/smpboot.h Sat Oct 12 13:22:19 2002 +++ linux98/include/asm-i386/smpboot.h Sat Oct 12 19:33:46 2002 @@ -13,8 +13,17 @@ #define TRAMPOLINE_LOW phys_to_virt(0x8) #define TRAMPOLINE_HIGH phys_to_virt(0xa) #else /* !CONFIG_CLUSTERED_APIC */ + #ifndef CONFIG_PC9800 #define TRAMPOLINE_LOW phys_to_virt(0x467) #define TRAMPOLINE_HIGH phys_to_virt(0x469) + #else /* CONFIG_PC9800 */ + /* + * On PC-9800, continuation on warm reset is done by loading + * %ss:%sp from 0x0000:0404 and executing 'lret', so: + */ + #define TRAMPOLINE_LOW phys_to_virt(0x4fa) + #define TRAMPOLINE_HIGH phys_to_virt(0x4fc) + #endif /* !CONFIG_PC9800 */ #endif /* CONFIG_CLUSTERED_APIC */ #ifdef CONFIG_CLUSTERED_APIC
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Thu Nov 07 2002 - 22:00:45 EST