Hi!
A few minutes ago I got a Kernel OOPS on my fileserver while it
was serving 'Return of the Jedi' from a 8x80gb raid5 via samba to a
Windows 2000 client.
It's a vanilla 2.4.19 kernel.
I reported a slightly different OOPS 2 month ago, but it wasn't fixed
(at least I didn't notice). After changing one IDE Controller and the
RAM it ran ok until today.
ksymoops 2.4.6 on i686 2.4.19. Options used
-V (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.4.19/ (specified)
-m /boot/System.old (specified)
Nov 6 22:56:25 pikelot kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000003
Nov 6 22:56:25 pikelot kernel: c0195cf1
Nov 6 22:56:25 pikelot kernel: *pde = 00000000
Nov 6 22:56:25 pikelot kernel: Oops: 0002
Nov 6 22:56:25 pikelot kernel: CPU: 0
Nov 6 22:56:25 pikelot kernel: EIP: 0010:[<c0195cf1>] Not tainted
Using defaults from ksymoops -t elf32-i386 -a i386
Nov 6 22:56:25 pikelot kernel: EFLAGS: 00010086
Nov 6 22:56:25 pikelot kernel: eax: ffffffff ebx: c15b5c00 ecx: df9f6000 edx: dfe693b8
Nov 6 22:56:25 pikelot kernel: esi: df9f6000 edi: 00000000 ebp: db5204c0 esp: d2abfdd8
Nov 6 22:56:25 pikelot kernel: ds: 0018 es: 0018 ss: 0018
Nov 6 22:56:25 pikelot kernel: Process smbd (pid: 13473, stackpage=d2abf000)
Nov 6 22:56:25 pikelot kernel: Stack: c0195d40 df9f6000 c15b5c00 00000000 c0196199 c15b5c00 c15b5c00 00000000
Nov 6 22:56:25 pikelot kernel: 00000000 db5204c0 c15b5c00 00000000 d2abe000 00001000 00000048 00000080
Nov 6 22:56:25 pikelot kernel: c0198062 14c1aa48 c0198074 c15b5c00 02f71848 00001000 00000000 db5204c0
Nov 6 22:56:25 pikelot kernel: Call Trace: [<c0195d40>] [<c0196199>] [<c0198062>] [<c0198074>] [<c019b2f8>]
Nov 6 22:56:25 pikelot kernel: [<c017f19c>] [<c017f1fe>] [<c0133dc0>] [<c012cae0>] [<c0125c4c>] [<c0152ddf>]
Nov 6 22:56:25 pikelot kernel: [<c01522b0>] [<c0125cf5>] [<c0126315>] [<c0126522>] [<c0126a75>] [<c0126960>]
Nov 6 22:56:25 pikelot kernel: [<c01315c6>] [<c01086db>]
Nov 6 22:56:25 pikelot kernel: Code: 89 50 04 8b 51 04 8b 01 89 02 c7 41 04 00 00 00 00 c3 8d b6
>>EIP; c0195cf1 <remove_hash+11/30> <=====
>>ebx; c15b5c00 <_end+132b80c/20582c6c>
>>ecx; df9f6000 <_end+1f76bc0c/20582c6c>
>>edx; dfe693b8 <_end+1fbdefc4/20582c6c>
>>esi; df9f6000 <_end+1f76bc0c/20582c6c>
>>ebp; db5204c0 <_end+1b2960cc/20582c6c>
>>esp; d2abfdd8 <_end+128359e4/20582c6c>
Trace; c0195d40 <get_free_stripe+30/50>
Trace; c0196199 <get_active_stripe+259/500>
Trace; c0198062 <raid5_make_request+42/100>
Trace; c0198074 <raid5_make_request+54/100>
Trace; c019b2f8 <md_make_request+38/70>
Trace; c017f19c <generic_make_request+11c/130>
Trace; c017f1fe <submit_bh+4e/70>
Trace; c0133dc0 <block_read_full_page+200/220>
Trace; c012cae0 <__alloc_pages+40/170>
Trace; c0125c4c <add_to_page_cache_unique+6c/80>
Trace; c0152ddf <ext3_readpage+f/20>
Trace; c01522b0 <ext3_get_block+0/70>
Trace; c0125cf5 <page_cache_read+95/c0>
Trace; c0126315 <generic_file_readahead+105/140>
Trace; c0126522 <do_generic_file_read+1a2/400>
Trace; c0126a75 <generic_file_read+85/140>
Trace; c0126960 <file_read_actor+0/90>
Trace; c01315c6 <sys_read+96/f0>
Trace; c01086db <system_call+33/38>
Code; c0195cf1 <remove_hash+11/30>
00000000 <_EIP>:
Code; c0195cf1 <remove_hash+11/30> <=====
0: 89 50 04 mov %edx,0x4(%eax) <=====
Code; c0195cf4 <remove_hash+14/30>
3: 8b 51 04 mov 0x4(%ecx),%edx
Code; c0195cf7 <remove_hash+17/30>
6: 8b 01 mov (%ecx),%eax
Code; c0195cf9 <remove_hash+19/30>
8: 89 02 mov %eax,(%edx)
Code; c0195cfb <remove_hash+1b/30>
a: c7 41 04 00 00 00 00 movl $0x0,0x4(%ecx)
Code; c0195d02 <remove_hash+22/30>
11: c3 ret
Code; c0195d03 <remove_hash+23/30>
12: 8d b6 00 00 00 00 lea 0x0(%esi),%esi
Nov 6 23:06:49 pikelot kernel: <1>Unable to handle kernel NULL pointer dereference at virtual address 0000022f
Nov 6 23:06:49 pikelot kernel: c0195f20
Nov 6 23:06:49 pikelot kernel: *pde = 00000000
Nov 6 23:06:49 pikelot kernel: Oops: 0000
Nov 6 23:06:49 pikelot kernel: CPU: 0
Nov 6 23:06:49 pikelot kernel: EIP: 0010:[<c0195f20>] Not tainted
Nov 6 23:06:49 pikelot kernel: EFLAGS: 00010086
Nov 6 23:06:49 pikelot kernel: eax: ffffffff ebx: 00000008 ecx: 02fee770 edx: 00000000
Nov 6 23:06:49 pikelot kernel: esi: c15b5c00 edi: 000000ee ebp: d2cdcc40 esp: dafcfdd8
Nov 6 23:06:49 pikelot kernel: ds: 0018 es: 0018 ss: 0018
Nov 6 23:06:49 pikelot kernel: Process smbd (pid: 4406, stackpage=dafcf000)
Nov 6 23:06:49 pikelot kernel: Stack: c15b5c00 00000000 00000000 c0196179 c15b5c00 02fee770 c15b5c00 00000000
Nov 6 23:06:49 pikelot kernel: 00000000 d2cdcc40 c15b5c00 00000000 dafce000 00001000 00000070 00000080
Nov 6 23:06:49 pikelot kernel: c0198062 14f85370 c0198074 c15b5c00 02fee770 00001000 00000000 d2cdcc40
Nov 6 23:06:49 pikelot kernel: Call Trace: [<c0196179>] [<c0198062>] [<c0198074>] [<c019b2f8>] [<c017f19c>]
Nov 6 23:06:49 pikelot kernel: [<c017f1fe>] [<c0133dc0>] [<c012cae0>] [<c0125c4c>] [<c0152ddf>] [<c01522b0>]
Nov 6 23:06:49 pikelot kernel: [<c0125cf5>] [<c0126315>] [<c0126522>] [<c0126a75>] [<c0126960>] [<c01315c6>]
Nov 6 23:06:49 pikelot kernel: [<c01086db>]
Nov 6 23:06:49 pikelot kernel: Code: 39 88 30 02 00 00 74 08 8b 00 85 c0 75 f2 31 c0 5b 5e 5f c3
>>EIP; c0195f20 <__find_stripe+30/50> <=====
>>esi; c15b5c00 <_end+132b80c/20582c6c>
>>ebp; d2cdcc40 <_end+12a5284c/20582c6c>
>>esp; dafcfdd8 <_end+1ad459e4/20582c6c>
Trace; c0196179 <get_active_stripe+239/500>
Trace; c0198062 <raid5_make_request+42/100>
Trace; c0198074 <raid5_make_request+54/100>
Trace; c019b2f8 <md_make_request+38/70>
Trace; c017f19c <generic_make_request+11c/130>
Trace; c017f1fe <submit_bh+4e/70>
Trace; c0133dc0 <block_read_full_page+200/220>
Trace; c012cae0 <__alloc_pages+40/170>
Trace; c0125c4c <add_to_page_cache_unique+6c/80>
Trace; c0152ddf <ext3_readpage+f/20>
Trace; c01522b0 <ext3_get_block+0/70>
Trace; c0125cf5 <page_cache_read+95/c0>
Trace; c0126315 <generic_file_readahead+105/140>
Trace; c0126522 <do_generic_file_read+1a2/400>
Trace; c0126a75 <generic_file_read+85/140>
Trace; c0126960 <file_read_actor+0/90>
Trace; c01315c6 <sys_read+96/f0>
Trace; c01086db <system_call+33/38>
Code; c0195f20 <__find_stripe+30/50>
00000000 <_EIP>:
Code; c0195f20 <__find_stripe+30/50> <=====
0: 39 88 30 02 00 00 cmp %ecx,0x230(%eax) <=====
Code; c0195f26 <__find_stripe+36/50>
6: 74 08 je 10 <_EIP+0x10> c0195f30 <__find_stripe+40/50>
Code; c0195f28 <__find_stripe+38/50>
8: 8b 00 mov (%eax),%eax
Code; c0195f2a <__find_stripe+3a/50>
a: 85 c0 test %eax,%eax
Code; c0195f2c <__find_stripe+3c/50>
c: 75 f2 jne 0 <_EIP>
Code; c0195f2e <__find_stripe+3e/50>
e: 31 c0 xor %eax,%eax
Code; c0195f30 <__find_stripe+40/50>
10: 5b pop %ebx
Code; c0195f31 <__find_stripe+41/50>
11: 5e pop %esi
Code; c0195f32 <__find_stripe+42/50>
12: 5f pop %edi
Code; c0195f33 <__find_stripe+43/50>
13: c3 ret
-------------------------------------
/proc/version:
Linux version 2.4.19 (root@pikelot) (gcc version 2.95.4 20011002 (Debian prerelease)) #2 Fri Sep 20 23:42:34 CEST 2002
-------------------------------------
ver_linux:
Gnu C 2.95.4
Gnu make 3.79.1
util-linux 2.11n
mount 2.11n
modutils 2.4.19
e2fsprogs 1.30-WIP
PPP 2.4.1
Linux C Library 2.2.5
Dynamic linker (ldd) 2.2.5
Procps 2.0.7
Net-tools 1.60
Kbd 60:
Sh-utils 4.5.2
Modules Loaded tun 3c59x
-------------------------------------
dmesg (shortened):
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 39
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci00:07.1
ide0: BM-DMA at 0x9000-0x9007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x9008-0x900f, BIOS settings: hdc:DMA, hdd:DMA
HPT370: IDE controller on PCI bus 00 dev 88
PCI: Found IRQ 10 for device 00:11.0
HPT370: chipset revision 3
HPT370: not 100% native mode: will probe irqs later
HPT370: using 33MHz PCI clock
ide2: BM-DMA at 0xb000-0xb007, BIOS settings: hde:DMA, hdf:DMA
ide3: BM-DMA at 0xb008-0xb00f, BIOS settings: hdg:pio, hdh:pio
HPT370: IDE controller on PCI bus 00 dev 98
PCI: Found IRQ 11 for device 00:13.0
HPT370: chipset revision 3
HPT370: not 100% native mode: will probe irqs later
HPT370: using 33MHz PCI clock
ide4: BM-DMA at 0xc400-0xc407, BIOS settings: hdi:DMA, hdj:DMA
ide5: BM-DMA at 0xc408-0xc40f, BIOS settings: hdk:DMA, hdl:DMA
hda: IBM-DPTA-372050, ATA DISK drive
hdc: MAXTOR 4K080H4, ATA DISK drive
hdd: WDC WD800AB-00CBA0, ATA DISK drive
hde: MAXTOR 4K080H4, ATA DISK drive
hdf: MAXTOR 4K080H4, ATA DISK drive
hdi: MAXTOR 4K080H4, ATA DISK drive
hdj: WDC WD800AB-00CBA0, ATA DISK drive
hdk: MAXTOR 4K080H4, ATA DISK drive
hdl: WDC WD800AB-00CBA0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
ide2 at 0xa000-0xa007,0xa402 on irq 10
ide4 at 0xb400-0xb407,0xb802 on irq 11
ide5 at 0xbc00-0xbc07,0xc002 on irq 11
hda: 40088160 sectors (20525 MB) w/1961KiB Cache, CHS=2495/255/63, UDMA(33)
hdc: 156301488 sectors (80026 MB) w/2000KiB Cache, CHS=155061/16/63, UDMA(100)
hdd: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=155061/16/63, UDMA(100)
hde: 156301488 sectors (80026 MB) w/2000KiB Cache, CHS=155061/16/63, UDMA(100)
hdf: 156301488 sectors (80026 MB) w/2000KiB Cache, CHS=155061/16/63, UDMA(100)
hdi: 156301488 sectors (80026 MB) w/2000KiB Cache, CHS=155061/16/63, UDMA(100)
hdj: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=155061/16/63, UDMA(100)
hdk: 156301488 sectors (80026 MB) w/2000KiB Cache, CHS=155061/16/63, UDMA(100)
hdl: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=155061/16/63, UDMA(100)
Partition check:
hda: hda1 hda2 hda3 hda4
hdc: hdc1
hdd: hdd1
hde: hde1
hdf: hdf1
hdi: hdi1
hdj: hdj1
hdk: hdk1
hdl: hdl1
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: raid5 personality registered as nr 4
raid5: measuring checksumming speed
8regs : 1298.800 MB/sec
32regs : 1144.400 MB/sec
pII_mmx : 1985.600 MB/sec
p5_mmx : 2543.200 MB/sec
raid5: using function: p5_mmx (2543.200 MB/sec)
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
[events: 00000020]
[events: 00000020]
[events: 00000020]
[events: 00000020]
[events: 00000020]
[events: 00000020]
[events: 00000020]
[events: 00000020]
md: autorun ...
md: considering hdl1 ...
md: adding hdl1 ...
md: adding hdk1 ...
md: adding hdj1 ...
md: adding hdi1 ...
md: adding hdf1 ...
md: adding hde1 ...
md: adding hdd1 ...
md: adding hdc1 ...
md: created md0
md: bind<hdc1,1>
md: bind<hdd1,2>
md: bind<hde1,3>
md: bind<hdf1,4>
md: bind<hdi1,5>
md: bind<hdj1,6>
md: bind<hdk1,7>
md: bind<hdl1,8>
md: running: <hdl1><hdk1><hdj1><hdi1><hdf1><hde1><hdd1><hdc1>
md: hdl1's event counter: 00000020
md: hdk1's event counter: 00000020
md: hdj1's event counter: 00000020
md: hdi1's event counter: 00000020
md: hdf1's event counter: 00000020
md: hde1's event counter: 00000020
md: hdd1's event counter: 00000020
md: hdc1's event counter: 00000020
md: md0: raid array is not clean -- starting background reconstruction
md0: max total readahead window set to 1792k
md0: 7 data-disks, max readahead per data-disk: 256k
raid5: device hdl1 operational as raid disk 7
raid5: device hdk1 operational as raid disk 6
raid5: device hdj1 operational as raid disk 5
raid5: device hdi1 operational as raid disk 4
raid5: device hdf1 operational as raid disk 3
raid5: device hde1 operational as raid disk 2
raid5: device hdd1 operational as raid disk 1
raid5: device hdc1 operational as raid disk 0
raid5: allocated 8531kB for md0
raid5: raid level 5 set md0 active with 8 out of 8 devices, algorithm 2
raid5: raid set md0 not clean; reconstructing parity
RAID5 conf printout:
--- rd:8 wd:8 fd:0
disk 0, s:0, o:1, n:0 rd:0 us:1 dev:hdc1
disk 1, s:0, o:1, n:1 rd:1 us:1 dev:hdd1
disk 2, s:0, o:1, n:2 rd:2 us:1 dev:hde1
disk 3, s:0, o:1, n:3 rd:3 us:1 dev:hdf1
disk 4, s:0, o:1, n:4 rd:4 us:1 dev:hdi1
disk 5, s:0, o:1, n:5 rd:5 us:1 dev:hdj1
disk 6, s:0, o:1, n:6 rd:6 us:1 dev:hdk1
disk 7, s:0, o:1, n:7 rd:7 us:1 dev:hdl1
RAID5 conf printout:
--- rd:8 wd:8 fd:0
disk 0, s:0, o:1, n:0 rd:0 us:1 dev:hdc1
disk 1, s:0, o:1, n:1 rd:1 us:1 dev:hdd1
disk 2, s:0, o:1, n:2 rd:2 us:1 dev:hde1
disk 3, s:0, o:1, n:3 rd:3 us:1 dev:hdf1
disk 4, s:0, o:1, n:4 rd:4 us:1 dev:hdi1
disk 5, s:0, o:1, n:5 rd:5 us:1 dev:hdj1
disk 6, s:0, o:1, n:6 rd:6 us:1 dev:hdk1
disk 7, s:0, o:1, n:7 rd:7 us:1 dev:hdl1
md: updating md0 RAID superblock on device
md: hdl1 [events: 00000021]<6>(write) hdl1's sb offset: 78150592
md: syncing RAID array md0
md: minimum _guaranteed_ reconstruction speed: 100 KB/sec/disc.
md: using maximum available idle IO bandwith (but not more than 100000
KB/sec) for reconstruction.
md: using 124k window, over a total of 78150592 blocks.
md: hdk1 [events: 00000021]<6>(write) hdk1's sb offset: 78150592
spurious 8259A interrupt: IRQ7.
md: hdj1 [events: 00000021]<6>(write) hdj1's sb offset: 78150592
md: hdi1 [events: 00000021]<6>(write) hdi1's sb offset: 78150592
md: hdf1 [events: 00000021]<6>(write) hdf1's sb offset: 78150592
md: hde1 [events: 00000021]<6>(write) hde1's sb offset: 78150592
md: hdd1 [events: 00000021]<6>(write) hdd1's sb offset: 78150592
md: hdc1 [events: 00000021]<6>(write) hdc1's sb offset: 78150592
md: ... autorun DONE.
raid5: switching cache buffer size, 4096 --> 1024
raid5: switching cache buffer size, 1024 --> 4096
-------------------------------------
The full output of dmesg, lspci, /proc/(cpuinfo,modules,ioports,iomem,
mdstat), .config.
can be found here: http://www.soohrt.org/stuff/linux/panic2/index.html
Thanks in advance,
Karsten
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Thu Nov 07 2002 - 22:00:46 EST