Re: IPSEC FIRST LIGHT! (by non-kernel developer :-))

From: bert hubert (ahu@ds9a.nl)
Date: Thu Nov 07 2002 - 10:33:42 EST


On Thu, Nov 07, 2002 at 07:18:08AM -0800, David S. Miller wrote:

> Does it require more than setkey? Or does it need pseudo devices, GRE or
> anything? Just setting up tunnel mode doesn't appear to work - nothing gets
> crypted or signed.
>
> Alexey, any ideas?

This is the setup I am using ON host 10.0.0.216 itself:

# AH
add 1.2.3.4 10.0.0.216 ah 25700 -A hmac-md5 "1234567890123456";
add 10.0.0.216 1.2.3.4 ah 34500 -A hmac-md5 "1234567890123456";

# ESP
add 1.2.3.4 10.0.0.216 esp 25701 -E 3des-cbc "123456789012123456789012";
add 10.0.0.216 1.2.3.4 esp 34501 -E 3des-cbc "123456789012123456789012";

spdadd 10.0.0.0/24 1.2.3.0/24 any -P out ipsec
           esp/tunnel/1.2.3.4-10.0.0.216/require;

If I now ping 1.2.3.4, I see the packet go out on the wire unencrypted.

If I ping from 10.0.0.11 with a route to 1.2.3.0/24 to the ipsec host
10.0.0.216, I get an ICMP redirect.

Oh, by the way, my lowly pentiumpro200 manages to crypt *6 megabits/second*
with 3des-cbc! The box does get a bit slowish over the network then though.

Regards,

bert

-- 
http://www.PowerDNS.com          Versatile DNS Software & Services
http://lartc.org           Linux Advanced Routing & Traffic Control HOWTO
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Thu Nov 07 2002 - 22:00:48 EST