diff --minimal -urN -X /usr/share/dontdiff linux-2.5.52.vanilla/arch/v850/Kconfig linux-2.5.52/arch/v850/Kconfig --- linux-2.5.52.vanilla/arch/v850/Kconfig Thu Dec 19 20:02:33 2002 +++ linux-2.5.52/arch/v850/Kconfig Tue Dec 24 21:50:45 2002 @@ -23,6 +23,10 @@ bool default n +config CONFIG_GENERIC_IRQ + bool + default y + # Turn off some random 386 crap that can affect device config config ISA bool diff --minimal -urN -X /usr/share/dontdiff linux-2.5.52.vanilla/arch/v850/kernel/irq.c linux-2.5.52/arch/v850/kernel/irq.c --- linux-2.5.52.vanilla/arch/v850/kernel/irq.c Thu Nov 28 01:36:17 2002 +++ linux-2.5.52/arch/v850/kernel/irq.c Tue Dec 24 21:49:19 2002 @@ -26,50 +26,8 @@ #include -/* - * Controller mappings for all interrupt sources: - */ -irq_desc_t irq_desc[NR_IRQS] __cacheline_aligned = - { [0 ... NR_IRQS-1] = { 0, &no_irq_type, NULL, 0, SPIN_LOCK_UNLOCKED}}; - -/* - * Special irq handlers. - */ - -void no_action(int cpl, void *dev_id, struct pt_regs *regs) { } - -/* - * Generic no controller code - */ - -static void enable_none(unsigned int irq) { } -static unsigned int startup_none(unsigned int irq) { return 0; } -static void disable_none(unsigned int irq) { } -static void ack_none(unsigned int irq) -{ - /* - * 'what should we do if we get a hw irq event on an illegal vector'. - * each architecture has to answer this themselves, it doesnt deserve - * a generic callback i think. - */ - printk("received IRQ %d with unknown interrupt type\n", irq); -} - -/* startup is the same as "enable", shutdown is same as "disable" */ -#define shutdown_none disable_none -#define end_none enable_none - -struct hw_interrupt_type no_irq_type = { - "none", - startup_none, - shutdown_none, - enable_none, - disable_none, - ack_none, - end_none -}; -volatile unsigned long irq_err_count, spurious_count; +volatile unsigned long spurious_count; /* * Generic, controller-independent functions: @@ -119,119 +77,6 @@ return 0; } -/* - * This should really return information about whether - * we should do bottom half handling etc. Right now we - * end up _always_ checking the bottom half, which is a - * waste of time and is not what some drivers would - * prefer. - */ -int handle_IRQ_event(unsigned int irq, struct pt_regs * regs, struct irqaction * action) -{ - int status = 1; /* Force the "do bottom halves" bit */ - - if (!(action->flags & SA_INTERRUPT)) - local_irq_enable(); - - do { - status |= action->flags; - action->handler(irq, action->dev_id, regs); - action = action->next; - } while (action); - if (status & SA_SAMPLE_RANDOM) - add_interrupt_randomness(irq); - local_irq_disable(); - - return status; -} - -/* - * Generic enable/disable code: this just calls - * down into the PIC-specific version for the actual - * hardware disable after having gotten the irq - * controller lock. - */ - -/** - * disable_irq_nosync - disable an irq without waiting - * @irq: Interrupt to disable - * - * Disable the selected interrupt line. Disables of an interrupt - * stack. Unlike disable_irq(), this function does not ensure existing - * instances of the IRQ handler have completed before returning. - * - * This function may be called from IRQ context. - */ - -void inline disable_irq_nosync(unsigned int irq) -{ - irq_desc_t *desc = irq_desc + irq; - unsigned long flags; - - spin_lock_irqsave(&desc->lock, flags); - if (!desc->depth++) { - desc->status |= IRQ_DISABLED; - desc->handler->disable(irq); - } - spin_unlock_irqrestore(&desc->lock, flags); -} - -/** - * disable_irq - disable an irq and wait for completion - * @irq: Interrupt to disable - * - * Disable the selected interrupt line. Disables of an interrupt - * stack. That is for two disables you need two enables. This - * function waits for any pending IRQ handlers for this interrupt - * to complete before returning. If you use this function while - * holding a resource the IRQ handler may need you will deadlock. - * - * This function may be called - with care - from IRQ context. - */ - -void disable_irq(unsigned int irq) -{ - disable_irq_nosync(irq); - synchronize_irq(irq); -} - -/** - * enable_irq - enable interrupt handling on an irq - * @irq: Interrupt to enable - * - * Re-enables the processing of interrupts on this IRQ line - * providing no disable_irq calls are now in effect. - * - * This function may be called from IRQ context. - */ - -void enable_irq(unsigned int irq) -{ - irq_desc_t *desc = irq_desc + irq; - unsigned long flags; - - spin_lock_irqsave(&desc->lock, flags); - switch (desc->depth) { - case 1: { - unsigned int status = desc->status & ~IRQ_DISABLED; - desc->status = status; - if ((status & (IRQ_PENDING | IRQ_REPLAY)) == IRQ_PENDING) { - desc->status = status | IRQ_REPLAY; - hw_resend_irq(desc->handler,irq); - } - desc->handler->enable(irq); - /* fall-through */ - } - default: - desc->depth--; - break; - case 0: - printk("enable_irq(%u) unbalanced from %p\n", irq, - __builtin_return_address(0)); - } - spin_unlock_irqrestore(&desc->lock, flags); -} - /* Handle interrupt IRQ. REGS are the registers at the time of ther interrupt. */ unsigned int handle_irq (int irq, struct pt_regs *regs) @@ -448,197 +293,6 @@ spin_unlock_irqrestore(&desc->lock,flags); return; } -} - -/* - * IRQ autodetection code.. - * - * This depends on the fact that any interrupt that - * comes in on to an unassigned handler will get stuck - * with "IRQ_WAITING" cleared and the interrupt - * disabled. - */ - -static DECLARE_MUTEX(probe_sem); - -/** - * probe_irq_on - begin an interrupt autodetect - * - * Commence probing for an interrupt. The interrupts are scanned - * and a mask of potential interrupt lines is returned. - * - */ - -unsigned long probe_irq_on(void) -{ - unsigned int i; - irq_desc_t *desc; - unsigned long val; - unsigned long delay; - - down(&probe_sem); - /* - * something may have generated an irq long ago and we want to - * flush such a longstanding irq before considering it as spurious. - */ - for (i = NR_IRQS-1; i > 0; i--) { - desc = irq_desc + i; - - spin_lock_irq(&desc->lock); - if (!irq_desc[i].action) - irq_desc[i].handler->startup(i); - spin_unlock_irq(&desc->lock); - } - - /* Wait for longstanding interrupts to trigger. */ - for (delay = jiffies + HZ/50; time_after(delay, jiffies); ) - /* about 20ms delay */ barrier(); - - /* - * enable any unassigned irqs - * (we must startup again here because if a longstanding irq - * happened in the previous stage, it may have masked itself) - */ - for (i = NR_IRQS-1; i > 0; i--) { - desc = irq_desc + i; - - spin_lock_irq(&desc->lock); - if (!desc->action) { - desc->status |= IRQ_AUTODETECT | IRQ_WAITING; - if (desc->handler->startup(i)) - desc->status |= IRQ_PENDING; - } - spin_unlock_irq(&desc->lock); - } - - /* - * Wait for spurious interrupts to trigger - */ - for (delay = jiffies + HZ/10; time_after(delay, jiffies); ) - /* about 100ms delay */ barrier(); - - /* - * Now filter out any obviously spurious interrupts - */ - val = 0; - for (i = 0; i < NR_IRQS; i++) { - irq_desc_t *desc = irq_desc + i; - unsigned int status; - - spin_lock_irq(&desc->lock); - status = desc->status; - - if (status & IRQ_AUTODETECT) { - /* It triggered already - consider it spurious. */ - if (!(status & IRQ_WAITING)) { - desc->status = status & ~IRQ_AUTODETECT; - desc->handler->shutdown(i); - } else - if (i < 32) - val |= 1 << i; - } - spin_unlock_irq(&desc->lock); - } - - return val; -} - -/* - * Return a mask of triggered interrupts (this - * can handle only legacy ISA interrupts). - */ - -/** - * probe_irq_mask - scan a bitmap of interrupt lines - * @val: mask of interrupts to consider - * - * Scan the ISA bus interrupt lines and return a bitmap of - * active interrupts. The interrupt probe logic state is then - * returned to its previous value. - * - * Note: we need to scan all the irq's even though we will - * only return ISA irq numbers - just so that we reset them - * all to a known state. - */ -unsigned int probe_irq_mask(unsigned long val) -{ - int i; - unsigned int mask; - - mask = 0; - for (i = 0; i < NR_IRQS; i++) { - irq_desc_t *desc = irq_desc + i; - unsigned int status; - - spin_lock_irq(&desc->lock); - status = desc->status; - - if (status & IRQ_AUTODETECT) { - if (i < 16 && !(status & IRQ_WAITING)) - mask |= 1 << i; - - desc->status = status & ~IRQ_AUTODETECT; - desc->handler->shutdown(i); - } - spin_unlock_irq(&desc->lock); - } - up(&probe_sem); - - return mask & val; -} - -/* - * Return the one interrupt that triggered (this can - * handle any interrupt source). - */ - -/** - * probe_irq_off - end an interrupt autodetect - * @val: mask of potential interrupts (unused) - * - * Scans the unused interrupt lines and returns the line which - * appears to have triggered the interrupt. If no interrupt was - * found then zero is returned. If more than one interrupt is - * found then minus the first candidate is returned to indicate - * their is doubt. - * - * The interrupt probe logic state is returned to its previous - * value. - * - * BUGS: When used in a module (which arguably shouldnt happen) - * nothing prevents two IRQ probe callers from overlapping. The - * results of this are non-optimal. - */ - -int probe_irq_off(unsigned long val) -{ - int i, irq_found, nr_irqs; - - nr_irqs = 0; - irq_found = 0; - for (i = 0; i < NR_IRQS; i++) { - irq_desc_t *desc = irq_desc + i; - unsigned int status; - - spin_lock_irq(&desc->lock); - status = desc->status; - - if (status & IRQ_AUTODETECT) { - if (!(status & IRQ_WAITING)) { - if (!nr_irqs) - irq_found = i; - nr_irqs++; - } - desc->status = status & ~IRQ_AUTODETECT; - desc->handler->shutdown(i); - } - spin_unlock_irq(&desc->lock); - } - up(&probe_sem); - - if (nr_irqs > 1) - irq_found = -irq_found; - return irq_found; } /* this was setup_x86_irq but it seems pretty generic */ diff --minimal -urN -X /usr/share/dontdiff linux-2.5.52.vanilla/include/asm-v850/hw_irq.h linux-2.5.52/include/asm-v850/hw_irq.h --- linux-2.5.52.vanilla/include/asm-v850/hw_irq.h Tue Dec 24 21:55:02 2002 +++ linux-2.5.52/include/asm-v850/hw_irq.h Tue Dec 24 21:55:15 2002 @@ -5,4 +5,9 @@ { } +#define ack_bad_irq(irq) + +/* Return a pointer to the irq descriptor for IRQ. */ +#define irq_desc(irq) (irq_desc + (irq)) + #endif /* __V850_HW_IRQ_H__ */