Broadcom Gigabit 5703 and Bridging

From: Paul Schulz (pschulz@foursticks.com)
Date: Wed Jan 01 2003 - 20:50:29 EST


Greetings,

I'm seeing 'TCP Checksum' Errors after packets pass through a host
bridging TCP packets with:

 - Kernel 2.4.20
 - Bridge code
 - tg3 (Broadcom Gigabit 5703)

   eth0: Tigon3 [partno(BCM95703A30) rev 1002 PHY(5703)]
    (PCIX:100MHz:64-bit) 10/100/1000BaseT
  (eth1 is similar)
  
Pings (ICMP) pass through the bridge just fine.

The hardware is IBM's xSeries 305.

Paul

--
                Paul Schulz - Software Engineer [codito, ergo sum]
        Foursticks Pty Ltd - 2/259 Glen Osmond Road, Frewville, SA 5063
    Phone: +61 8 8338 5500   Fax: +61 8 8338 5511   Mobile: +61 401 981 301
       Email: pschulz@foursticks.com           Web: www.foursticks.com
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Tue Jan 07 2003 - 22:00:16 EST