# This is a BitKeeper generated patch for the following project:
# Project Name: Linux kernel tree
# This patch format is intended for GNU patch command version 2.5 or higher.
# This patch includes the following deltas:
# ChangeSet 1.975 -> 1.976
# drivers/char/agp/generic.c 1.12 -> 1.13
# drivers/char/agp/sworks-agp.c 1.15 -> 1.16
# drivers/char/agp/amd-k8-agp.c 1.18 -> 1.19
#
# The following is the BitKeeper ChangeSet Log
# --------------------------------------------
# 03/01/07 bjorn_helgaas@hp.com 1.976
# Factor out collecting status of all AGP devices.
# --------------------------------------------
#
diff -Nru a/drivers/char/agp/amd-k8-agp.c b/drivers/char/agp/amd-k8-agp.c
--- a/drivers/char/agp/amd-k8-agp.c Tue Jan 7 12:52:37 2003
+++ b/drivers/char/agp/amd-k8-agp.c Tue Jan 7 12:52:37 2003
@@ -370,61 +370,10 @@
pci_read_config_dword(agp_bridge.dev, agp_bridge.capndx+4, &command);
- /*
- * PASS2: go through all devices that claim to be
- * AGP devices and collect their data.
- */
-
- pci_for_each_dev(device) {
- cap_ptr = pci_find_capability(device, PCI_CAP_ID_AGP);
- if (cap_ptr != 0x00) {
- /*
- * Ok, here we have a AGP device. Disable impossible
- * settings, and adjust the readqueue to the minimum.
- */
- pci_read_config_dword(device, cap_ptr + 4, &scratch);
-
- /* adjust RQ depth */
- command =
- ((command & ~0xff000000) |
- min_t(u32, (mode & 0xff000000),
- min_t(u32, (command & 0xff000000),
- (scratch & 0xff000000))));
-
- /* disable SBA if it's not supported */
- if (!((command & 0x200) && (scratch & 0x200) && (mode & 0x200)))
- command &= ~0x200;
-
- /* disable FW if it's not supported */
- if (!((command & 0x10) && (scratch & 0x10) && (mode & 0x10)))
- command &= ~0x10;
-
- if (!((command & 2) && (scratch & 2) && (mode & 2)))
- command &= ~2; /* 8x */
-
- if (!((command & 1) && (scratch & 1) && (mode & 1)))
- command &= ~1; /* 4x */
- }
- }
- /*
- * PASS3: Figure out the 8X/4X setting and enable the
- * target (our motherboard chipset).
- */
-
- if (command & 2)
- command &= ~5; /* 8X */
-
- if (command & 1)
- command &= ~6; /* 4X */
-
+ command = agp_collect_device_status(mode, command);
command |= 0x100;
pci_write_config_dword(agp_bridge.dev, agp_bridge.capndx+8, command);
-
- /*
- * PASS4: Go through all AGP devices and update the
- * command registers.
- */
agp_device_command(command, 1);
}
diff -Nru a/drivers/char/agp/generic.c b/drivers/char/agp/generic.c
--- a/drivers/char/agp/generic.c Tue Jan 7 12:52:37 2003
+++ b/drivers/char/agp/generic.c Tue Jan 7 12:52:37 2003
@@ -314,6 +314,69 @@
/* Generic Agp routines - Start */
+u32 agp_collect_device_status(u32 mode, u32 command)
+{
+ struct pci_dev *device;
+ u8 agp;
+ u32 scratch;
+
+ pci_for_each_dev(device) {
+ agp = pci_find_capability(device, PCI_CAP_ID_AGP);
+ if (!agp)
+ continue;
+
+ /*
+ * Ok, here we have a AGP device. Disable impossible
+ * settings, and adjust the readqueue to the minimum.
+ */
+ pci_read_config_dword(device, agp + 4, &scratch);
+
+ /* adjust RQ depth */
+ command = ((command & ~0xff000000) |
+ min_t(u32, (mode & 0xff000000),
+ min_t(u32, (command & 0xff000000),
+ (scratch & 0xff000000))));
+
+ /* disable SBA if it's not supported */
+ if (!((command & 0x00000200) &&
+ (scratch & 0x00000200) &&
+ (mode & 0x00000200)))
+ command &= ~0x00000200;
+
+ /* disable FW if it's not supported */
+ if (!((command & 0x00000010) &&
+ (scratch & 0x00000010) &&
+ (mode & 0x00000010)))
+ command &= ~0x00000010;
+
+ if (!((command & 4) &&
+ (scratch & 4) &&
+ (mode & 4)))
+ command &= ~0x00000004;
+
+ if (!((command & 2) &&
+ (scratch & 2) &&
+ (mode & 2)))
+ command &= ~0x00000002;
+
+ if (!((command & 1) &&
+ (scratch & 1) &&
+ (mode & 1)))
+ command &= ~0x00000001;
+ }
+
+ if (command & 4)
+ command &= ~3; /* 4X */
+
+ if (command & 2)
+ command &= ~5; /* 2X (8X for AGP3.0) */
+
+ if (command & 1)
+ command &= ~6; /* 1X (4X for AGP3.0) */
+
+ return command;
+}
+
void agp_device_command(u32 command, int agp_v3)
{
struct pci_dev *device;
@@ -336,85 +399,16 @@
void agp_generic_agp_enable(u32 mode)
{
- struct pci_dev *device = NULL;
- u32 command, scratch;
- u8 cap_ptr;
+ u32 command;
pci_read_config_dword(agp_bridge.dev, agp_bridge.capndx + 4, &command);
- /*
- * PASS1: go through all devices that claim to be
- * AGP devices and collect their data.
- */
-
- pci_for_each_dev(device) {
- cap_ptr = pci_find_capability(device, PCI_CAP_ID_AGP);
- if (cap_ptr != 0x00) {
- /*
- * Ok, here we have a AGP device. Disable impossible
- * settings, and adjust the readqueue to the minimum.
- */
-
- pci_read_config_dword(device, cap_ptr + 4, &scratch);
-
- /* adjust RQ depth */
- command = ((command & ~0xff000000) |
- min_t(u32, (mode & 0xff000000),
- min_t(u32, (command & 0xff000000),
- (scratch & 0xff000000))));
-
- /* disable SBA if it's not supported */
- if (!((command & 0x00000200) &&
- (scratch & 0x00000200) &&
- (mode & 0x00000200)))
- command &= ~0x00000200;
-
- /* disable FW if it's not supported */
- if (!((command & 0x00000010) &&
- (scratch & 0x00000010) &&
- (mode & 0x00000010)))
- command &= ~0x00000010;
-
- if (!((command & 4) &&
- (scratch & 4) &&
- (mode & 4)))
- command &= ~0x00000004;
-
- if (!((command & 2) &&
- (scratch & 2) &&
- (mode & 2)))
- command &= ~0x00000002;
-
- if (!((command & 1) &&
- (scratch & 1) &&
- (mode & 1)))
- command &= ~0x00000001;
- }
- }
- /*
- * PASS2: Figure out the 4X/2X/1X setting and enable the
- * target (our motherboard chipset).
- */
-
- if (command & 4)
- command &= ~3; /* 4X */
-
- if (command & 2)
- command &= ~5; /* 2X */
-
- if (command & 1)
- command &= ~6; /* 1X */
-
- command |= 0x00000100;
+ command = agp_collect_device_status(mode, command);
+ command |= 0x100;
pci_write_config_dword(agp_bridge.dev,
agp_bridge.capndx + 8,
command);
-
- /*
- * PASS3: Go throu all AGP devices and update the
- * command registers.
- */
agp_device_command(command, 0);
}
diff -Nru a/drivers/char/agp/sworks-agp.c b/drivers/char/agp/sworks-agp.c
--- a/drivers/char/agp/sworks-agp.c Tue Jan 7 12:52:37 2003
+++ b/drivers/char/agp/sworks-agp.c Tue Jan 7 12:52:37 2003
@@ -413,88 +413,22 @@
static void serverworks_agp_enable(u32 mode)
{
- struct pci_dev *device = NULL;
- u32 command, scratch, cap_id;
- u8 cap_ptr;
+ u32 command;
pci_read_config_dword(serverworks_private.svrwrks_dev,
agp_bridge.capndx + 4,
&command);
- /*
- * PASS1: go throu all devices that claim to be
- * AGP devices and collect their data.
- */
+ command = agp_collect_device_status(mode, command);
+ command &= ~0x10; /* disable FW */
+ command &= ~0x08;
- pci_for_each_dev(device) {
- cap_ptr = pci_find_capability(device, PCI_CAP_ID_AGP);
- if (cap_ptr != 0x00) {
- /*
- * Ok, here we have a AGP device. Disable impossible
- * settings, and adjust the readqueue to the minimum.
- */
-
- pci_read_config_dword(device, cap_ptr + 4, &scratch);
-
- /* adjust RQ depth */
- command =
- ((command & ~0xff000000) |
- min_t(u32, (mode & 0xff000000),
- min_t(u32, (command & 0xff000000),
- (scratch & 0xff000000))));
-
- /* disable SBA if it's not supported */
- if (!((command & 0x00000200) &&
- (scratch & 0x00000200) &&
- (mode & 0x00000200)))
- command &= ~0x00000200;
-
- /* disable FW */
- command &= ~0x00000010;
-
- command &= ~0x00000008;
-
- if (!((command & 4) &&
- (scratch & 4) &&
- (mode & 4)))
- command &= ~0x00000004;
-
- if (!((command & 2) &&
- (scratch & 2) &&
- (mode & 2)))
- command &= ~0x00000002;
-
- if (!((command & 1) &&
- (scratch & 1) &&
- (mode & 1)))
- command &= ~0x00000001;
- }
- }
- /*
- * PASS2: Figure out the 4X/2X/1X setting and enable the
- * target (our motherboard chipset).
- */
-
- if (command & 4) {
- command &= ~3; /* 4X */
- }
- if (command & 2) {
- command &= ~5; /* 2X */
- }
- if (command & 1) {
- command &= ~6; /* 1X */
- }
- command |= 0x00000100;
+ command |= 0x100;
pci_write_config_dword(serverworks_private.svrwrks_dev,
agp_bridge.capndx + 8,
command);
-
- /*
- * PASS3: Go throu all AGP devices and update the
- * command registers.
- */
agp_device_command(command, 0);
}
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Tue Jan 07 2003 - 22:00:36 EST