Hello!
I bought the digital still camera Praktica DC21. It is one of the
cheaper models with usb-storage emulation. Under win98, the camera works
well and appears as an additional drive in explorer, after i had the
drive-INF-file installed. The camera is a sony-based oem-version, i found
out. You can look for addidional Informations of the camera at
www.praktica.de.
I thought, it should be possible to use every usb mass storage device with
compact flash card under linux. But the first time i plugged in the camera
onto the usb-port, i could not even think about mounting it.
The device identifies as following:
chrissie@balearen:~$ cat /proc/bus/usb/devices
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=d400
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 4 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=084d ProdID=0011 Rev= 1.10
S: Manufacturer=
S: Product=DC2MEGA
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I added the device in unusual_devs.h.
// added by chrissie
UNUSUAL_DEV (0x084d, 0x0011, 0x0001, 0x9999,
"Praktika D2MEGA",
"Digital Camera",
US_SC_SCSI, US_PR_BULK, NULL,
US_FL_MODE_XLATE ),
Then i compiled and installed the modules.
I am using Debian Linux 3.0r1, with an kernel 2.4.20, self-compiled.
chrissie@balearen:~$ uname -a
Linux balearen 2.4.20 #8 Thu Jan 9 15:55:10 CET 2003 i686 unknown
Now, i get the following output in dmesg after switching the camera on:
hub.c: connect-debounce failed, port 2 disabled
hub.c: new USB device 00:07.2-2, assigned address 2
scsi1 : SCSI emulation for USB Mass Storage devices
Vendor: Model: Rev:
Type: Direct-Access ANSI SCSI revision: 02
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 2
Looks quite good, i think.
chrissie@balearen:~$ cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: LITEON Model: CD-ROM LTN301 Rev: ML35
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 01 Lun: 00
Vendor: Model: CD-R/RW RW7120A Rev: 1.10
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 00 Lun: 00
Vendor: DSC Model: Card Reader Rev: .
Type: Direct-Access ANSI SCSI revision: 02
The device now seems to be recogniced, and the usb-storage-to-scsi seems
to work as well.
I was very happy so far. But when i enter the following:
root@balearen:~# mount /dev/sda1 /mnt -t vfat
i get an kernel oops after following additional output to the console
usb-uhci: interrupt, status 3, frame #1976
interrupt, status 2, frame #1259
a ps -ax at another console at this time tells me, that the sd_mod is in
the state initializing.
The console now hangs for a short time, and the following kernel oops is
as follows:
usb.c: usb disconnect on device 00:07.2-2 adress 3
Unable to handle kernel NULL pointer dereference at virtual address
0000000c
printing eip
c01261d8
*pde=00000000
Oops: 0000
CPU: 0
EIP: 0010:[<c01261d8>] Not tainted
Eflags: 0001002
eax: 00b00000 ebx: 00000093 ecx: 00000000 edx: c100001c
esi: 00000000 edi: 00000206 ebp: ce13be00 esp: c9c39de0
ds: 0018 es:0018 ss:0018
Process usb.agent (pid:1010, stackpage=c9c39000)
Stack 00000000 ce9348c0 00000000 ce13be00 c01d2b23 00000693 ce13be00
ce9348c0
00000000 ce13be00 ce13be00 d0838e50 c1338860 ce13be00 c01d202c
ce13be00
ce13be00 00000000 d083977c ce13be00 c133887c c1338860 00000000
00000000
Call trace: [<c01d2b23>] [<d0838e50>] [<c01d202c>] [<d0839852>]
[<c0107e8d>] [<c0107ff6>] [<c010a1d8>] [<c011f09b>]
[<c010eb64>]
[<c010ea04>] [<c011992c>] [<c011a904>] [<c0106cc4>]
Code: 2b 59 0c 89 d8 31 d2 f7 76 18 89 c3 86 41 14 89 44 99 18 89
<0> Kernel panic: Aiee, killing interrupt handler!
In interrupt handler: not syncing
Additionally, a LED at the keyboard is flashing.
Now, the system is dead and i have to do a hardware-reset.
Now, some additional system information:
(if interesting for you)
balearen:~# gcc --version
2.95.4
balearen:~# lspci
00:00.0 Host bridge: VIA Technologies, Inc. VT82C693A/694x [Apollo
PRO133x] (rev 44)
00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo
MVP3/Pro133x AGP]
00:07.0 ISA bridge: VIA Technologies, Inc. VT82C596 ISA [Mobile South]
(rev 12)
00:07.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 06)
00:07.2 USB Controller: VIA Technologies, Inc. UHCI USB (rev 08)
00:07.3 Host bridge: VIA Technologies, Inc. VT82C596 Power Management (rev
20)
00:0a.0 VGA compatible controller: ATI Technologies Inc 3D Rage Pro (rev
5c)
00:0c.0 Ethernet controller: 3Com Corporation 3c900 Combo [Boomerang]
00:0e.0 Ethernet controller: D-Link System Inc Sundance Ethernet
00:10.0 Communication controller: Conexant HSF 56k Data/Fax/Voice Modem
(rev 01)
The processor i am using is a Celeron Coppermine 733 MHz overcloced to
1100 MHz,
Well, to come to an end:
I am really interested to get this camera to work under Linux.
Can you tell me, what to do any further? I am at the end from my sight, so
far.
Matthew Dharm: i can send the camera to you for a period of time, if you
are interested.
Thanks in advance for any help!
Christian Braeunlich (chrissie)
x.chrissie.x@t-online.de
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Wed Jan 15 2003 - 22:00:28 EST