Linux version 2.5.54 (rusty@cpci-b) (gcc version 3.2 20020903 (Red Hat Linux 8.0 3.2-7)) #2 SMP Wed Jan 8 12:46:53 PST 2003 Video mode to be used for restore is ffff BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e7400 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000010000000 (usable) BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved) 256MB LOWMEM available. On node 0 totalpages: 65536 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 61440 pages, LIFO batch:15 HighMem zone: 0 pages, LIFO batch:1 ACPI: Unable to locate RSDP Building zonelist for node : 0 Kernel command line: auto BOOT_IMAGE=hack2 ro BOOT_FILE=/boot/hack2 debug=1 Local APIC disabled by BIOS -- reenabling. Could not enable APIC! Initializing CPU#0 PID hash table entries: 2048 (order 11: 16384 bytes) Detected 498.539 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 985.08 BogoMIPS Memory: 255512k/262144k available (2038k kernel code, 5892k reserved, 808k data, 120k init, 0k highmem) Dentry cache hash table entries: 32768 (order: 6, 262144 bytes) Inode-cache hash table entries: 16384 (order: 5, 131072 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) -> /dev -> /dev/console -> /root CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K CPU serial number disabled. CPU: After generic, caps: 0383f9ff 00000000 00000000 00000000 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX CPU0: Intel Pentium III (Coppermine) stepping 03 per-CPU timeslice cutoff: 730.93 usecs. task migration cache decay timeout: 1 msecs. SMP motherboard not detected. Local APIC not detected. Using dummy APIC emulation. Starting migration thread for cpu 0 CPUS done 2 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket device class 'cpu': registering device class cpu: adding driver system:cpu PCI: PCI BIOS revision 2.10 entry at 0xfd89e, last bus=3 PCI: Using configuration type 1 device class cpu: adding device CPU 0 interfaces: adding device CPU 0 BIO: pool of 256 setup, 14Kb (56 bytes/bio) biovec pool[0]: 1 bvecs: 256 entries (12 bytes) biovec pool[1]: 4 bvecs: 256 entries (48 bytes) biovec pool[2]: 16 bvecs: 256 entries (192 bytes) biovec pool[3]: 64 bvecs: 256 entries (768 bytes) biovec pool[4]: 128 bvecs: 256 entries (1536 bytes) biovec pool[5]: 256 bvecs: 256 entries (3072 bytes) ACPI: Subsystem revision 20021217 ACPI: System description tables not found ACPI-0065: *** Error: acpi_load_tables: Could not get RSDP, AE_NOT_FOUND ACPI-0115: *** Error: acpi_load_tables: Could not load tables: AE_NOT_FOUND ACPI: Unable to load the System Description Tables Linux Plug and Play Support v0.93 (c) Adam Belay block request queues: 128 requests per read queue 128 requests per write queue 8 requests per batch enter congestion at 31 exit congestion at 33 ACPI: ACPI tables contain no PCI IRQ routing entries PCI: Invalid ACPI-PCI IRQ routing table PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Using IRQ router PIIX [8086/7110] at 00:07.0 PCI: Cannot allocate resource region 4 of device 00:07.1 IA-32 Microcode Update Driver: v1.11 Enabling SEP on CPU 0 aio_setup: sizeof(struct page) = 40 Journalled Block Device driver loaded Installing knfsd (copyright (C) 1996 okir@monad.swb.de). Limiting direct PCI/PCI transfers. Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A device class 'tty': registering pty: 256 Unix98 ptys configured Real Time Clock Driver v1.11 Non-volatile memory driver v1.2 Linux agpgart interface v0.100 (c) Dave Jones [drm] Initialized r128 2.3.0 20021029 on minor 0 Linux Tulip driver version 1.1.13 (May 11, 2002) PCI: Found IRQ 11 for device 00:05.0 PCI: Sharing IRQ 11 with 02:0d.0 tulip0: EEPROM default media type Autosense. tulip0: Index #0 - Media 10baseT (#0) described by a 21142 Serial PHY (2) block. tulip0: Index #1 - Media 10baseT-FDX (#4) described by a 21142 Serial PHY (2) block. tulip0: Index #2 - Media 10base2 (#1) described by a 21142 Serial PHY (2) block. tulip0: Index #3 - Media AUI (#2) described by a 21142 Serial PHY (2) block. tulip0: Index #4 - Media MII (#11) described by a 21142 MII PHY (3) block. tulip0: MII transceiver #0 config 1000 status 782d advertising 01e1. eth0: Digital DS21143 Tulip rev 65 at 0x1080, 00:80:50:02:73:75, IRQ 11. PCI: Found IRQ 10 for device 00:06.0 PCI: Sharing IRQ 10 with 03:0a.0 tulip1: EEPROM default media type Autosense. tulip1: Index #0 - Media 10baseT (#0) described by a 21142 Serial PHY (2) block. tulip1: Index #1 - Media 10baseT-FDX (#4) described by a 21142 Serial PHY (2) block. tulip1: Index #2 - Media 10base2 (#1) described by a 21142 Serial PHY (2) block. tulip1: Index #3 - Media AUI (#2) described by a 21142 Serial PHY (2) block. tulip1: Index #4 - Media MII (#11) described by a 21142 MII PHY (3) block. tulip1: MII transceiver #0 config 1000 status 782d advertising 01e1. eth1: Digital DS21143 Tulip rev 65 at 0x1400, 00:80:50:02:73:76, IRQ 10. Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx hda: IBM-DJSA-210, ATA DISK drive hdc: CD-224E, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: host protected area => 1 hda: 19640880 sectors (10056 MB) w/384KiB Cache, CHS=19485/16/63 hda: hda1 hda2 hda3 hdc: ATAPI 24X CD-ROM drive, 128kB Cache Uniform CD-ROM driver Revision: 3.12 end_request: I/O error, dev hdc, sector 0 device class 'input': registering register interface 'mouse' with class 'input' mice: PS/2 mouse device common for all mice input: PC Speaker input: PS/2 Generic Mouse on isa0060/serio1 serio: i8042 AUX port at 0x60,0x64 irq 12 input: AT Set 2 keyboard on isa0060/serio0 serio: i8042 KBD port at 0x60,0x64 irq 1 cpci_hotplug: CompactPCI Hot Plug Core version: 0.2 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 cpcihp_zt5550: ZT5550 CompactPCI Hot Plug Driver version: 0.2 NET4: Linux TCP/IP 1.0 for NET4.0 IP: routing cache hash table of 1024 buckets, 16Kbytes TCP: Hash tables configured (established 8192 bind 10922) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. cpci_hotplug: cannot find ENUM# source, shutting down kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 120k freed EXT3 FS 2.4-0.9.16, 02 Dec 2001 on ide0(3,2), internal journal Adding 514072k swap on /dev/hda3. Priority:-1 extents:1 eth0: Setting full-duplex based on MII#0 link partner capability of 45e1. spurious 8259A interrupt: IRQ7. eth1: Setting full-duplex based on MII#0 link partner capability of 01e1. warning: process `update' used the obsolete bdflush system call Fix your initscripts? warning: process `update' used the obsolete bdflush system call Fix your initscripts?