Ethernet Conexant LANfinity doesnt send anything

From: Adriano Carvalho (ch0wn_@hotmail.com)
Date: Thu Jan 16 2003 - 22:16:37 EST


I have a Compaq Laptop 1400 14xl244, with Modem HCF conexant , and ethernet
card Conexant LANfinity. They are COMBO, and they use IRQ 11. When I startup
module (tulip) for my ethernet card, its ok. But when I try send or receive
anything, I dont get. PCMCIA card uses IRQ 11 too, so I get it out from
kernel, but it doesnt solve. Here is my /proc/interrupts :

11: 20 XT-PIC hcf, eth0 this was after a time of try ping, and the number
"20" after stays 1691, after 2000... Donald Becker (tulip developer) told me
to send these lines : Compaq 12XL125 machine detected. Enabling interrupts
during APM calls. ... Local APIC disabled by BIOS -- reenabling. Found and
enabled local APIC! .. PCI: Using IRQ router VIA [1106/0686] at 00:07.0 PCI:
Found IRQ 11 for device 00:0a.0 PCI: Sharing IRQ 11 with 00:09.0 PCI:
Sharing IRQ 11 with 00:09.1 PCI: Disabling Via external APIC routing

anybody can help me ?? Thanks for all.

Adriano Carvalho.
PS : If I take off APIC support, this doesnt change anything. it doesnt
solve it

_________________________________________________________________
MSN Hotmail, o maior webmail do Brasil. http://www.hotmail.com

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Thu Jan 23 2003 - 22:00:15 EST