[PATCHSET] PC-9800 sub-arch (20/29) parport

From: Osamu Tomita (tomita@cinet.co.jp)
Date: Sun Jan 19 2003 - 01:53:32 EST


This is patchset to support NEC PC-9800 subarchitecture
against 2.5.59 (20/29).

Parallel port support.

diff -Nru linux/drivers/parport/parport_pc.c linux98/drivers/parport/parport_pc.c
--- linux/drivers/parport/parport_pc.c 2002-12-16 11:08:22.000000000 +0900
+++ linux98/drivers/parport/parport_pc.c 2002-12-22 20:51:23.000000000 +0900
@@ -332,7 +332,10 @@
 
 unsigned char parport_pc_read_status(struct parport *p)
 {
- return inb (STATUS (p));
+ if (pc98 && p->base == 0x40)
+ return ((inb(0x42) & 0x04) << 5) | PARPORT_STATUS_ERROR;
+ else
+ return inb (STATUS (p));
 }
 
 void parport_pc_disable_irq(struct parport *p)
@@ -1644,6 +1647,8 @@
 {
         unsigned char r, w;
 
+ if (pc98 && pb->base == 0x40)
+ return PARPORT_MODE_PCSPP;
         /*
          * first clear an eventually pending EPP timeout
          * I (sailer@ife.ee.ethz.ch) have an SMSC chipset
@@ -1777,6 +1782,9 @@
 {
         int ok = 0;
   
+ if (pc98 && pb->base == 0x40)
+ return 0; /* never support */
+
         clear_epp_timeout(pb);
 
         /* try to tri-state the buffer */
@@ -1908,6 +1916,9 @@
                         config & 0x80 ? "Level" : "Pulses");
 
                 configb = inb (CONFIGB (pb));
+ if (pc98 && (CONFIGB(pb) == 0x14d) && ((configb & 0x38) == 0x30))
+ configb = (configb & ~0x38) | 0x28; /* IRQ 14 */
+
                 printk (KERN_DEBUG "0x%lx: ECP port cfgA=0x%02x cfgB=0x%02x\n",
                         pb->base, config, configb);
                 printk (KERN_DEBUG "0x%lx: ECP settings irq=", pb->base);
@@ -2048,6 +2059,9 @@
         ECR_WRITE (pb, ECR_CNF << 5); /* Configuration MODE */
 
         intrLine = (inb (CONFIGB (pb)) >> 3) & 0x07;
+ if (pc98 && (CONFIGB(pb) == 0x14d) && (intrLine == 6))
+ intrLine = 5; /* IRQ 14 */
+
         irq = lookup[intrLine];
 
         ECR_WRITE (pb, oecr);
@@ -2212,7 +2226,14 @@
         struct parport tmp;
         struct parport *p = &tmp;
         int probedirq = PARPORT_IRQ_NONE;
- if (check_region(base, 3)) return NULL;
+ if (pc98 && base == 0x40) {
+ int i;
+ for (i = 0; i < 8; i += 2)
+ if (check_region(base + i, 1)) return NULL;
+ } else {
+ if (check_region(base, 3)) return NULL;
+ }
+
         priv = kmalloc (sizeof (struct parport_pc_private), GFP_KERNEL);
         if (!priv) {
                 printk (KERN_DEBUG "parport (0x%lx): no memory!\n", base);
@@ -2245,7 +2266,7 @@
         if (base_hi && !check_region(base_hi,3))
                 parport_ECR_present(p);
 
- if (base != 0x3bc) {
+ if (!pc98 && base != 0x3bc) {
                 if (!check_region(base+0x3, 5)) {
                         if (!parport_EPP_supported(p))
                                 parport_ECPEPP_supported(p);
@@ -2343,7 +2364,12 @@
                 printk(KERN_INFO "%s: irq %d detected\n", p->name, probedirq);
         parport_proc_register(p);
 
- request_region (p->base, 3, p->name);
+ if (pc98 && p->base == 0x40) {
+ int i;
+ for (i = 0; i < 8; i += 2)
+ request_region(p->base + i, 1, p->name);
+ } else
+ request_region (p->base, 3, p->name);
         if (p->size > 3)
                 request_region (p->base + 3, p->size - 3, p->name);
         if (p->modes & PARPORT_MODE_ECP)
@@ -2413,7 +2439,13 @@
                 free_dma(p->dma);
         if (p->irq != PARPORT_IRQ_NONE)
                 free_irq(p->irq, p);
- release_region(p->base, 3);
+ if (pc98 && p->base == 0x40) {
+ int i;
+ for (i = 0; i < 8; i += 2)
+ release_region(p->base + i, 1);
+ } else
+ release_region(p->base, 3);
+
         if (p->size > 3)
                 release_region(p->base + 3, p->size - 3);
         if (p->modes & PARPORT_MODE_ECP)
@@ -2996,6 +3028,30 @@
 {
         int count = 0;
 
+ if (pc98) {
+ /* Set default resource settings for old style parport */
+ int base = 0x40;
+ int base_hi = 0;
+ int irq = PARPORT_IRQ_NONE;
+ int dma = PARPORT_DMA_NONE;
+
+ /* Check PC9800 old style parport */
+ outb(inb(0x149) & ~0x10, 0x149); /* disable IEEE1284 */
+ if (!(inb(0x149) & 0x10)) { /* IEEE1284 disabled ? */
+ outb(inb(0x149) | 0x10, 0x149); /* enable IEEE1284 */
+ if (inb(0x149) & 0x10) { /* IEEE1284 enabled ? */
+ /* Set default settings for IEEE1284 parport */
+ base = 0x140;
+ base_hi = 0x14c;
+ irq = 14;
+ /* dma = PARPORT_DMA_NONE; */
+ }
+ }
+
+ if (parport_pc_probe_port(base, base_hi, irq, dma, NULL))
+ count++;
+ }
+
         if (parport_pc_probe_port(0x3bc, 0x7bc, autoirq, autodma, NULL))
                 count++;
         if (parport_pc_probe_port(0x378, 0x778, autoirq, autodma, NULL))
diff -Nru linux/include/linux/parport_pc.h linux98/include/linux/parport_pc.h
--- linux/include/linux/parport_pc.h 2002-06-12 11:15:27.000000000 +0900
+++ linux98/include/linux/parport_pc.h 2002-08-19 14:13:09.000000000 +0900
@@ -119,6 +119,11 @@
 #endif
         ctr = (ctr & ~mask) ^ val;
         ctr &= priv->ctr_writable; /* only write writable bits. */
+#ifdef CONFIG_X86_PC9800
+ if (p->base == 0x40 && ((priv->ctr) ^ ctr) & 0x01)
+ outb(0x0e | ((ctr & 0x01) ^ 0x01), 0x46);
+ else
+#endif /* CONFIG_X86_PC9800 */
         outb (ctr, CONTROL (p));
         priv->ctr = ctr; /* Update soft copy */
         return ctr;
@@ -191,6 +196,11 @@
 
 extern __inline__ unsigned char parport_pc_read_status(struct parport *p)
 {
+#ifdef CONFIG_X86_PC9800
+ if (p->base == 0x40)
+ return ((inb(0x42) & 0x04) << 5) | PARPORT_STATUS_ERROR;
+ else
+#endif /* CONFIG_X86_PC9800 */
         return inb(STATUS(p));
 }
 
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Thu Jan 23 2003 - 22:00:21 EST