I can confirm it worked this morning with 2.5.58.
cdrecord --version
Cdrecord 2.0 (i686-pc-linux-gnu) Copyright (C) 1995-2002 Jörg Schilling
uname -a
Linux nipplehead 2.5.58 #77 Thu Jan 16 02:57:13 GMT 2003 i686 AMD
Athlon(TM) XP2000+ AuthenticAMD GNU/Linux
I do know vcdxrip hasn't worked since 2.5.42 or so.
This is a 1/2 gentoo, 1/2 my fault box.
-pee
Gregoire Favre wrote:
>Hello,
>
>I sent this email to the cdwrite ml a while ago, and the conclusion was
>that it was a kernel bug... so I forward here ;-)
>
>I got the same result with 2.5.58 (I need to compil a 2.5.59...).
>
>Thank you very much ;-)
>
>----- Forwarded message from Gregoire Favre <greg@ulima.unil.ch> -----
>
>Date: Sun, 12 Jan 2003 22:58:50 +0100
>From: Gregoire Favre <greg@ulima.unil.ch>
>To: cdwrite@other.debian.org
>Subject: Status of ide writing?
>
>Hello,
>
>is it possible to burn without idescsi under 2.5.56?
>
>I got:
>
>Cdrecord-ProDVD-Clone 2.0 (i586-pc-linux-gnu) Copyright (C) 1995-2002 Jörg Schilling
>Unlocked features: ProDVD Clone
>Limited features: speed
>This copy of cdrecord is licensed for: private/research/educational_non-commercial_use
>TOC Type: 1 = CD-ROM
>scsidev: '/dev/hdc'
>devname: '/dev/hdc'
>scsibus: -2 target: -2 lun: -2
>Warning: Open by 'devname' is unintentional and not supported.
>Linux sg driver version: 3.5.27
>Using libscg version 'schily-0.7'
>Driveropts: 'burnfree'
>atapi: 1
>Device type : Removable CD-ROM
>Version : 2
>Response Format: 2
>Capabilities :
>Vendor_info : 'SONY '
>Identifikation : 'DVD RW DRU-500A '
>Revision : '1.0f'
>Device seems to be: Generic mmc2 DVD-R/DVD-RW.
>Using generic SCSI-3/mmc-2 DVD-R/DVD-RW driver (mmc_dvd).
>Driver flags : DVD SWABAUDIO BURNFREE
>Supported modes: TAO PACKET SAO SAO/R96R RAW/R96R
>Drive buf size : 8126464 = 7936 KB
>FIFO size : 67108864 = 65536 KB
>Track 01: data 3502 MB
>Total size: 3502 MB = 1793056 sectors
>Current Secsize: 2048
>Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 505440
>Starting to write CD/DVD at speed 1 in real SAO mode for single session.
>Last chance to quit, starting real write in 9 seconds. 0.28% done, estimate finish Sun Jan 12 22:32:14 2003
> 0.56% done, estimate finish Sun Jan 12 22:29:15 2003
> 0.84% done, estimate finish Sun Jan 12 22:28:15 2003
> 1.12% done, estimate finish Sun Jan 12 22:27:45 2003
> 8 seconds. 1.39% done, estimate finish Sun Jan 12 22:28:39 2003
> 1.67% done, estimate finish Sun Jan 12 22:28:15 2003
> 0 seconds. Operation starts.
>Waiting for reader process to fill input buffer ... input buffer ready.
>BURN-Free is ON.
>Starting new track at sector: 0
>Track 01: 4 of 3502 MB written (fifo 99%) 13.1x.cdrecord-prodvd: Input/output error. write_g1: scsi sendcmd: no error
>CDB: 2A 00 00 00 08 B8 00 00 1F 00
>status: 0x1 (GOOD STATUS)
>resid: 63488
>cmd finished after 0.011s timeout 100s
>
>write track data: error after 4571136 bytes
>Sense Bytes: 70 00 00 00 00 00 00 12 00 00 00 00 00 00 00 00 00 00
>Writing time: 5.315s
>Average write speed 501.9x.
>Fixating...
>Fixating time: 84.976s
>cdrecord-prodvd: fifo had 1095 puts and 73 gets.
>cdrecord-prodvd: fifo was 0 times empty and 7 times full, min fill was 99%.
>Exit 254
>
>Should I compil again with ide-scsi?
>
>Thank you very much,
>
> Grégoire
>________________________________________________________________
>http://ulima.unil.ch/greg ICQ:16624071 mailto:greg@ulima.unil.ch
>-
>To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
>the body of a message to majordomo@vger.kernel.org
>More majordomo info at http://vger.kernel.org/majordomo-info.html
>Please read the FAQ at http://www.tux.org/lkml/
>
>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Thu Jan 23 2003 - 22:00:21 EST