On Wed, Jan 22 2003, Joerg Schilling wrote:
> >From: Gregoire Favre <greg@ulima.unil.ch>
>
> >after reporting this problem, someone pointed me that I should try
> >without DAO, I have tried this:
>
> >mkisofs -dvd-video -V $1 $2 | cdrecord-prodvd driveropts=burnfree -dummy -v dev=/dev/hdc fs=64m speed=1 -eject tsize={$SIZE}s -
>
> >And got this:
>
> >Cdrecord-ProDVD-Clone 2.0 (i586-pc-linux-gnu) Copyright (C) 1995-2002 Jörg Schilling
> >Unlocked features: ProDVD Clone
> >Limited features: speed
> >This copy of cdrecord is licensed for: private/research/educational_non-commercial_use
> >TOC Type: 1 = CD-ROM
> >scsidev: '/dev/hdc'
> >devname: '/dev/hdc'
> >scsibus: -2 target: -2 lun: -2
> >Warning: Open by 'devname' is unintentional and not supported.
> >Linux sg driver version: 3.5.27
> >Using libscg version 'schily-0.7'
> >Driveropts: 'burnfree'
> >atapi: 1
> >Device type : Removable CD-ROM
> >Version : 2
> >Response Format: 2
> >Capabilities :
> >Vendor_info : 'SONY '
> >Identifikation : 'DVD RW DRU-500A '
> >Revision : '1.0f'
> >Device seems to be: Generic mmc2 DVD-R/DVD-RW.
> >Using generic SCSI-3/mmc-2 DVD-R/DVD-RW driver (mmc_dvd).
> >Driver flags : DVD SWABAUDIO BURNFREE
> >Supported modes: TAO PACKET SAO SAO/R96R RAW/R96R
> >Drive buf size : 8126464 = 7936 KB
> >FIFO size : 67108864 = 65536 KB
> >Track 01: data 4001 MB
> >Total size: 4001 MB = 2048512 sectors
> >Current Secsize: 2048
> >Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 249984
> >Starting to write CD/DVD at speed 1 in dummy TAO mode for single session.
> >Last chance to quit, starting dummy write in 9 seconds. 0.24% done, estimate finish Tue Jan 21 23:09:02 2003
> > 8 seconds. 0.49% done, estimate finish Tue Jan 21 23:09:03 2003
> > 7 seconds. 0.73% done, estimate finish Tue Jan 21 23:06:46 2003
> > 6 seconds. 0.98% done, estimate finish Tue Jan 21 23:07:21 2003
> > 5 seconds. 1.22% done, estimate finish Tue Jan 21 23:07:41 2003
> > 4 seconds. 1.46% done, estimate finish Tue Jan 21 23:07:55 2003
> > 0 seconds. Operation starts.
> >Waiting for reader process to fill input buffer ... input buffer ready.
> >BURN-Free is ON.
> >Starting new track at sector: 0
> >Track 01: 4 of 4001 MB written (fifo 96%) 16.1x.cdrecord-prodvd: Success. write_g1: scsi sendcmd: no error
> >CDB: 2A 00 00 00 08 B8 00 00 1F 00
> >status: 0x1 (GOOD STATUS)
> >resid: 63488
> >cmd finished after 0.008s timeout 100s
>
> I can't tell you what happened because the kernel is broken :-(
>
> If you fix the kernel, you will get a readble error message,
How helpful. How about saying what's broken instead and I'd be happy to
fix it.
-- Jens Axboe- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Thu Jan 23 2003 - 22:00:28 EST