Re: [PATCH] 2.5.60 make cciss driver compile

From: steve cameron (steve.cameron@hp.com)
Date: Wed Feb 12 2003 - 02:24:41 EST


factor duplicated geometry inquiry code into common routine in cciss driver.
(patch 11 of 11)
-- steve

--- linux-2.5.60/drivers/block/cciss.c~factor_more_duped_code 2003-02-12 10:13:22.000000000 +0600
+++ linux-2.5.60-scameron/drivers/block/cciss.c 2003-02-12 10:13:22.000000000 +0600
@@ -1006,6 +1006,49 @@ case CMD_HARDWARE_ERR:
         return(return_status);
 
 }
+static void cciss_geometry_inquiry(int ctlr, int logvol,
+ int withirq, unsigned int total_size,
+ unsigned int block_size, InquiryData_struct *inq_buff,
+ drive_info_struct *drv)
+{
+ int return_code;
+ memset(inq_buff, 0, sizeof(InquiryData_struct));
+ if (withirq)
+ return_code = sendcmd_withirq(CISS_INQUIRY, ctlr,
+ inq_buff, sizeof(*inq_buff), 1, logvol ,0xC1);
+ else
+ return_code = sendcmd(CISS_INQUIRY, ctlr, inq_buff,
+ sizeof(*inq_buff), 1, logvol ,0xC1, NULL);
+ if (return_code == IO_OK) {
+ if(inq_buff->data_byte[8] == 0xFF) {
+ printk(KERN_WARNING
+ "cciss: reading geometry failed, volume "
+ "does not support reading geometry\n");
+ drv->block_size = block_size;
+ drv->nr_blocks = total_size;
+ drv->heads = 255;
+ drv->sectors = 32; // Sectors per track
+ drv->cylinders = total_size / 255 / 32;
+ } else {
+ drv->block_size = block_size;
+ drv->nr_blocks = total_size;
+ drv->heads = inq_buff->data_byte[6];
+ drv->sectors = inq_buff->data_byte[7];
+ drv->cylinders = (inq_buff->data_byte[4] & 0xff) << 8;
+ drv->cylinders += inq_buff->data_byte[5];
+ }
+ } else { /* Get geometry failed */
+ printk(KERN_WARNING "cciss: reading geometry failed, "
+ "continuing with default geometry\n");
+ drv->block_size = block_size;
+ drv->nr_blocks = total_size;
+ drv->heads = 255;
+ drv->sectors = 32; // Sectors per track
+ drv->cylinders = total_size / 255 / 32;
+ }
+ printk(KERN_INFO " heads= %d, sectors= %d, cylinders= %d\n\n",
+ drv->heads, drv->sectors, drv->cylinders);
+}
 static void
 cciss_read_capacity(int ctlr, int logvol, ReadCapdata_struct *buf,
                 int withirq, unsigned int *total_size, unsigned int *block_size)
@@ -1166,53 +1209,8 @@ static int register_new_disk(int ctlr)
                 hba[ctlr]->highest_lun = logvol;
         cciss_read_capacity(ctlr, logvol, size_buff, 1,
                 &total_size, &block_size);
- /* Execute the command to read the disk geometry */
- memset(inq_buff, 0, sizeof(InquiryData_struct));
- return_code = sendcmd_withirq(CISS_INQUIRY, ctlr, inq_buff,
- sizeof(InquiryData_struct), 1, logvol ,0xC1 );
- if (return_code == IO_OK)
- {
- if(inq_buff->data_byte[8] == 0xFF)
- {
- printk(KERN_WARNING "cciss: reading geometry failed, "
- "volume does not support reading geometry\n");
-
- hba[ctlr]->drv[logvol].block_size = block_size;
- hba[ctlr]->drv[logvol].nr_blocks = total_size;
- hba[ctlr]->drv[logvol].heads = 255;
- hba[ctlr]->drv[logvol].sectors = 32; // Sectors per track
- hba[ctlr]->drv[logvol].cylinders = total_size / 255 / 32;
- } else
- {
-
- hba[ctlr]->drv[logvol].block_size = block_size;
- hba[ctlr]->drv[logvol].nr_blocks = total_size;
- hba[ctlr]->drv[logvol].heads =
- inq_buff->data_byte[6];
- hba[ctlr]->drv[logvol].sectors =
- inq_buff->data_byte[7];
- hba[ctlr]->drv[logvol].cylinders =
- (inq_buff->data_byte[4] & 0xff) << 8;
- hba[ctlr]->drv[logvol].cylinders +=
- inq_buff->data_byte[5];
- }
- }
- else /* Get geometry failed */
- {
-
- printk(KERN_WARNING "cciss: reading geometry failed, "
- "continuing with default geometry\n");
-
- hba[ctlr]->drv[logvol].block_size = block_size;
- hba[ctlr]->drv[logvol].nr_blocks = total_size;
- hba[ctlr]->drv[logvol].heads = 255;
- hba[ctlr]->drv[logvol].sectors = 32; // Sectors per track
- hba[ctlr]->drv[logvol].cylinders = total_size / 255 / 32;
- }
- printk(KERN_INFO " heads= %d, sectors= %d, cylinders= %d\n\n",
- hba[ctlr]->drv[logvol].heads,
- hba[ctlr]->drv[logvol].sectors,
- hba[ctlr]->drv[logvol].cylinders);
+ cciss_geometry_inquiry(ctlr, logvol, 1, total_size, block_size,
+ inq_buff, &hba[ctlr]->drv[logvol]);
         hba[ctlr]->drv[logvol].usage_count = 0;
         ++hba[ctlr]->num_luns;
         /* setup partitions per disk */
@@ -2168,50 +2166,8 @@ static void cciss_getgeometry(int cntl_n
 #endif /* CCISS_DEBUG */
                 cciss_read_capacity(cntl_num, i, size_buff, 0,
                         &total_size, &block_size);
- /* Execute the command to read the disk geometry */
- memset(inq_buff, 0, sizeof(InquiryData_struct));
- return_code = sendcmd(CISS_INQUIRY, cntl_num, inq_buff,
- sizeof(InquiryData_struct), 1, i ,0xC1, NULL );
- if (return_code == IO_OK)
- {
- if(inq_buff->data_byte[8] == 0xFF)
- {
- printk(KERN_WARNING "cciss: reading geometry failed, volume does not support reading geometry\n");
-
- hba[cntl_num]->drv[i].block_size = block_size;
- hba[cntl_num]->drv[i].nr_blocks = total_size;
- hba[cntl_num]->drv[i].heads = 255;
- hba[cntl_num]->drv[i].sectors = 32; // Sectors per track
- hba[cntl_num]->drv[i].cylinders = total_size / 255 / 32; } else
- {
-
- hba[cntl_num]->drv[i].block_size = block_size;
- hba[cntl_num]->drv[i].nr_blocks = total_size;
- hba[cntl_num]->drv[i].heads =
- inq_buff->data_byte[6];
- hba[cntl_num]->drv[i].sectors =
- inq_buff->data_byte[7];
- hba[cntl_num]->drv[i].cylinders =
- (inq_buff->data_byte[4] & 0xff) << 8;
- hba[cntl_num]->drv[i].cylinders +=
- inq_buff->data_byte[5];
- }
- }
- else /* Get geometry failed */
- {
- printk(KERN_WARNING "cciss: reading geometry failed, continuing with default geometry\n");
-
- hba[cntl_num]->drv[i].block_size = block_size;
- hba[cntl_num]->drv[i].nr_blocks = total_size;
- hba[cntl_num]->drv[i].heads = 255;
- hba[cntl_num]->drv[i].sectors = 32; // Sectors per track
- hba[cntl_num]->drv[i].cylinders = total_size / 255 / 32;
- }
- printk(KERN_INFO " heads= %d, sectors= %d, cylinders= %d\n\n",
- hba[cntl_num]->drv[i].heads,
- hba[cntl_num]->drv[i].sectors,
- hba[cntl_num]->drv[i].cylinders);
-
+ cciss_geometry_inquiry(cntl_num, i, 0, total_size, block_size,
+ inq_buff, &hba[cntl_num]->drv[i]);
         }
         kfree(ld_buff);
         kfree(size_buff);

_
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Sat Feb 15 2003 - 22:00:44 EST