Hello all,
yet another strange occurence on a Serverworks-chipset based system. I have:
00:00.0 Host bridge: ServerWorks CNB20HE Host Bridge (rev 23)
00:00.1 Host bridge: ServerWorks CNB20HE Host Bridge (rev 01)
00:00.2 Host bridge: ServerWorks: Unknown device 0006 (rev 01)
00:00.3 Host bridge: ServerWorks: Unknown device 0006 (rev 01)
00:02.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 0d)
00:03.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 0d)
00:04.0 Network controller: Elsa AG QuickStep 1000 (rev 01)
00:05.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 07)
00:05.1 Input device controller: Creative Labs SB Live! MIDI/Game Port (rev 07)
00:07.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)
00:0f.0 ISA bridge: ServerWorks CSB5 South Bridge (rev 93)
00:0f.1 IDE interface: ServerWorks CSB5 IDE Controller (rev 93)
00:0f.2 USB Controller: ServerWorks OSB4/CSB5 USB Controller (rev 05)
00:0f.3 Host bridge: ServerWorks: Unknown device 0225
01:02.0 Unknown mass storage controller: Promise Technology, Inc. 20268 (rev 01)
01:03.0 SCSI storage controller: Adaptec AIC-7892A U160/m (rev 02)
01:04.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5701 Gigabit Ethernet (rev 15)
02:02.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5701 Gigabit Ethernet (rev 15)
02:03.0 SCSI storage controller: Adaptec AIC-7899P U160/m (rev 01)
02:03.1 SCSI storage controller: Adaptec AIC-7899P U160/m (rev 01)
with SCSI:
<6>SCSI subsystem driver Revision: 1.00
<6>scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8
<4> <Adaptec 29160 Ultra160 SCSI adapter>
<4> aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
<4>
<6>scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8
<4> <Adaptec aic7899 Ultra160 SCSI adapter>
<4> aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
<4>
<6>scsi2 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8
<4> <Adaptec aic7899 Ultra160 SCSI adapter>
<4> aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
<4>
<4> Vendor: BNCHMARK Model: DLT1 Rev: 391B
<4> Type: Sequential-Access ANSI SCSI revision: 02
<4> Vendor: IBM Model: IC35L073UWDY10-0 Rev: S21E
<4> Type: Direct-Access ANSI SCSI revision: 03
<4>scsi1:A:8:0: Tagged Queuing enabled. Depth 8
<4> Vendor: QUANTUM Model: SDLT320 Rev: 3838
<4> Type: Sequential-Access ANSI SCSI revision: 02
<6>scsi3 : SCSI host adapter emulation for IDE ATAPI devices
<4>scsi: c165dca0, pc: c1632ba0, rq: dfede540
<4> Vendor: AOPEN Model: CD-RW CRW2440 Rev: 2.02
<4> Type: CD-ROM ANSI SCSI revision: 02
<6>st: Version 20020805, bufsize 32768, wrt 30720, max init. bufs 4, s/g segs 16
<4>Attached scsi tape st0 at scsi0, channel 0, id 1, lun 0
<4>Attached scsi tape st1 at scsi2, channel 0, id 2, lun 0
<4>Attached scsi disk sda at scsi1, channel 0, id 8, lun 0
Report:
If I try to do a simple tar on the second streamer (/dev/st1) the machine cold-boots (no oops, no segfault, just zap) after varying amount of written data. I try to tar around 50GB and it does not manage this amount ever, I tried several times. If I disconnect /dev/st0 (BNCHMARK drive) and do just the same tar on /dev/st0 it works as expected.
As you can see /dev/st0 is connected to another SCSI-bus, so it should not interfer on the bus (termination issue or the like).
As it cold-boots without prior warning I have no good idea how to present valuable debug info.
Regards,
Stephan
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Fri Mar 07 2003 - 22:00:21 EST