Linux version 2.5.63 (root@schwing.thomasons.org) (gcc version 3.2.1 20021207 (Gentoo Linux 3.2.1-20021207)) #9 SMP Sun Mar 2 14:30:37 CST 2003 Video mode to be used for restore is 30b BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003ffec000 (usable) BIOS-e820: 000000003ffec000 - 000000003ffef000 (ACPI data) BIOS-e820: 000000003ffef000 - 000000003ffff000 (reserved) BIOS-e820: 000000003ffff000 - 0000000040000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 127MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000f7d40 hm, page 000f7000 reserved twice. hm, page 000f8000 reserved twice. hm, page 000f7000 reserved twice. hm, page 000f8000 reserved twice. On node 0 totalpages: 262124 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 225280 pages, LIFO batch:16 HighMem zone: 32748 pages, LIFO batch:7 ACPI: RSDP (v000 ASUS ) @ 0x000f8490 ACPI: RSDT (v001 ASUS A7M266-D 12336.12337) @ 0x3ffec000 ACPI: FADT (v001 ASUS A7M266-D 12336.12337) @ 0x3ffec100 ACPI: BOOT (v001 ASUS A7M266-D 12336.12337) @ 0x3ffec040 ACPI: MADT (v001 ASUS A7M266-D 12336.12337) @ 0x3ffec080 ACPI: DSDT (v001 ASUS A7M266-D 00000.04096) @ 0x00000000 ACPI: BIOS passes blacklist ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:6 APIC version 16 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 6:6 APIC version 16 ACPI: LAPIC_NMI (acpi_id[0x00] polarity[0x1] trigger[0x1] lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] polarity[0x1] trigger[0x1] lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0]) IOAPIC[0]: Assigned apic_id 2 IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, IRQ 0-23 ACPI: INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x0] trigger[0x0]) ACPI: INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x9] polarity[0x3] trigger[0x3]) Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Building zonelist for node : 0 Kernel command line: root=/dev/hda5 vga=9 hdd=ide-scsi ide_setup: hdd=ide-scsi Initializing CPU#0 PID hash table entries: 4096 (order 12: 32768 bytes) Detected 1624.229 MHz processor. Console: colour VGA+ 132x50 Calibrating delay loop... 3194.88 BogoMIPS Memory: 1033712k/1048496k available (2197k kernel code, 13888k reserved, 615k data, 348k init, 130992k highmem) Security Scaffold v1.0.0 initialized Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) -> /dev -> /dev/console -> /root CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Machine check exception polling timer started. Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX CPU0: AMD Athlon(TM) MP 2000+ stepping 02 per-CPU timeslice cutoff: 731.45 usecs. task migration cache decay timeout: 1 msecs. enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Booting processor 1/1 eip 2000 Initializing CPU#1 masked ExtINT on CPU#1 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 3244.03 BogoMIPS CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: AMD Athlon(TM) MP 2000+ stepping 02 Total of 2 processors activated (6438.91 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 pin1=2 pin2=0 testing the IO APIC....................... .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1624.0313 MHz. ..... host bus clock speed is 259.0890 MHz. checking TSC synchronization across 2 CPUs: passed. Starting migration thread for cpu 0 Bringing up 1 CPU 1 IS NOW UP! Starting migration thread for cpu 1 CPUS done 2 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket mtrr: v2.0 (20020519) mtrr: your CPUs had inconsistent fixed MTRR settings mtrr: probably your BIOS does not setup all CPUs. mtrr: corrected configuration. PCI: PCI BIOS revision 2.10 entry at 0xf1dd0, last bus=2 PCI: Using configuration type 1 BIO: pool of 256 setup, 14Kb (56 bytes/bio) biovec pool[0]: 1 bvecs: 256 entries (12 bytes) biovec pool[1]: 4 bvecs: 256 entries (48 bytes) biovec pool[2]: 16 bvecs: 256 entries (192 bytes) biovec pool[3]: 64 bvecs: 256 entries (768 bytes) biovec pool[4]: 128 bvecs: 256 entries (1536 bytes) biovec pool[5]: 256 bvecs: 256 entries (3072 bytes) ACPI: Subsystem revision 20030122 ACPI-0109: *** Error: No object was returned from [\_SB_.PCI0.UAR2._STA] (Node c1a6678c), AE_NOT_EXIST ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 *6 7 9 10 11 12 14 15) ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) Linux Plug and Play Support v0.95 (c) Adam Belay block request queues: 128 requests per read queue 128 requests per write queue 8 requests per batch enter congestion at 15 exit congestion at 17 SCSI subsystem initialized drivers/usb/core/usb.c: registered new driver hub PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' SBF: Simple Boot Flag extension found and enabled. SBF: Setting boot flags 0x80 Starting balanced_irq Enabling SEP on CPU 0 Enabling SEP on CPU 1 highmem bounce pool size: 64 pages aio_setup: sizeof(struct page) = 40 Journalled Block Device driver loaded devfs: v1.22 (20021013) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (FF) [SLPF] ACPI: Processor [CPU0] (supports C1) ACPI: Processor [CPU1] (supports C1) fb: 3Dfx Voodoo5 memory = 32768K pty: 256 Unix98 ptys configured Real Time Clock Driver v1.11 amd768_rng: AMD768 system management I/O registers at 0xE400. amd768_rng hardware driver 0.1.0 loaded Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected AMD 760MP chipset agpgart: Maximum main memory to use for agp memory: 941M agpgart: AGP aperture is 32M @ 0xfc000000 [drm] Initialized tdfx 1.0.0 20010216 on minor 0 Hangcheck: starting hangcheck timer 0.5.0 (tick is 180 seconds, margin is 60 seconds). RAMDISK driver initialized: 16 RAM disks of 10240K size 1024 blocksize loop: loaded (max 8 devices) 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html 02:06.0: 3Com PCI 3c905C Tornado at 0xa000. Vers LK1.1.19 eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin and others eth1: Intel Corp. 82557/8/9 [Ethernet , 00:A0:C9:3E:D6:7D, IRQ 18. Receiver lock-up bug exists -- enabling work-around. Board assembly 661949-004, Physical connectors present: RJ45 Primary interface chip DP83840A PHY #1. DP83840 specific setup, setting register 23 to 8462. General self-test: passed. Serial sub-system self-test: passed. Internal registers self-test: passed. ROM checksum self-test: passed (0x49caa8d6). Receiver lock-up workaround activated. Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx hda: Maxtor 5T030H3, ATA DISK drive hdc: IBM-DTLA-307030, ATA DISK drive hdd: PLEXTOR CD-R PX-W4824A, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: host protected area => 1 hda: 60030432 sectors (30736 MB) w/2048KiB Cache, CHS=59554/16/63 /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 < p5 p6 p7 p8 > hdc: host protected area => 1 hdc: 60036480 sectors (30739 MB) w/1916KiB Cache, CHS=59560/16/63 /dev/ide/host1/bus0/target0/lun0: p1 p2 p3 p4 < p5 p6 p7 > scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: PLEXTOR Model: CD-R PX-W4824A Rev: 1.00 Type: CD-ROM ANSI SCSI revision: 02 sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.12 ohci-hcd 02:00.0: Advanced Micro Devic AMD-768 [Opus] USB ohci-hcd 02:00.0: irq 19, pci mem fe83a000 ohci-hcd 02:00.0: new USB bus registered, assigned bus number 1 usb usb1: Product: Advanced Micro Devic AMD-768 [Opus] USB usb usb1: Manufacturer: Linux 2.5.63 ohci-hcd usb usb1: SerialNumber: 02:00.0 hub 1-0:0: USB hub found hub 1-0:0: 4 ports detected drivers/usb/core/usb.c: registered new driver hid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice serio: i8042 AUX port at 0x60,0x64 irq 12 hub 1-0:0: debounce: port 2: delay 100ms stable 4 status 0x301 input: AT Set 2 keyboard on isa0060/serio0 serio: i8042 KBD port at 0x60,0x64 irq 1 i2c-dev.o: i2c /dev entries driver module version 2.7.0 (20021208) i2c-proc.o version 2.7.0 (20021208) md: linear personality registered as nr 1 md: raid0 personality registered as nr 2 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 Advanced Linux Sound Architecture Driver Version 0.9.0rc7 (Sat Feb 15 15:01:21 2003 UTC). es1968: not attempting power management. hub 1-0:0: new USB device on port 2, assigned address 2 usb 1-2: Product: USB-PS/2 Optical Mouse usb 1-2: Manufacturer: Logitech input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-02:00.0-2 es1968: clocking to 48000 ALSA device list: #0: ESS ES1978 (Maestro 2E) at 0x9800, irq 19 NET4: Linux TCP/IP 1.0 for NET4.0 IP: routing cache hash table of 4096 buckets, 64Kbytes TCP: Hash tables configured (established 131072 bind 43690) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. md: Autodetecting RAID arrays. md: autorun ... md: considering ide/host1/bus0/target0/lun0/part6 ... md: adding ide/host1/bus0/target0/lun0/part6 ... md: ide/host1/bus0/target0/lun0/part5 has different UUID to ide/host1/bus0/target0/lun0/part6 md: ide/host1/bus0/target0/lun0/part3 has different UUID to ide/host1/bus0/target0/lun0/part6 md: adding ide/host0/bus0/target0/lun0/part7 ... md: ide/host0/bus0/target0/lun0/part6 has different UUID to ide/host1/bus0/target0/lun0/part6 md: ide/host0/bus0/target0/lun0/part2 has different UUID to ide/host1/bus0/target0/lun0/part6 md: created md2 md: bind md: bind md: running: md2: max total readahead window set to 2048k md2: 2 data-disks, max readahead per data-disk: 1024k md2: setting max_sectors to 512, segment boundary to 131071 raid0: looking at ide/host1/bus0/target0/lun0/part6 raid0: comparing ide/host1/bus0/target0/lun0/part6(3076352) with ide/host1/bus0/target0/lun0/part6(3076352) raid0: END raid0: ==> UNIQUE raid0: 1 zones raid0: looking at ide/host0/bus0/target0/lun0/part7 raid0: comparing ide/host0/bus0/target0/lun0/part7(3076352) with ide/host1/bus0/target0/lun0/part6(3076352) raid0: EQUAL raid0: FINAL 1 zones raid0: done. raid0 : md_size is 6152704 blocks. raid0 : conf->smallest->size is 6152704 blocks. raid0 : nb_zone is 1. raid0 : Allocating 8 bytes for hash. md: marking sb clean... md: marking sb clean... md: updating md2 RAID superblock on device (in sync 1) md: ide/host1/bus0/target0/lun0/part6 <6>(write) ide/host1/bus0/target0/lun0/part6's sb offset: 3076352 md: ide/host0/bus0/target0/lun0/part7 <6>(write) ide/host0/bus0/target0/lun0/part7's sb offset: 3076352 md: considering ide/host1/bus0/target0/lun0/part5 ... md: adding ide/host1/bus0/target0/lun0/part5 ... md: ide/host1/bus0/target0/lun0/part3 has different UUID to ide/host1/bus0/target0/lun0/part5 md: adding ide/host0/bus0/target0/lun0/part6 ... md: ide/host0/bus0/target0/lun0/part2 has different UUID to ide/host1/bus0/target0/lun0/part5 md: created md1 md: bind md: bind md: running: md1: max total readahead window set to 2048k md1: 2 data-disks, max readahead per data-disk: 1024k md1: setting max_sectors to 512, segment boundary to 131071 raid0: looking at ide/host1/bus0/target0/lun0/part5 raid0: comparing ide/host1/bus0/target0/lun0/part5(3076352) with ide/host1/bus0/target0/lun0/part5(3076352) raid0: END raid0: ==> UNIQUE raid0: 1 zones raid0: looking at ide/host0/bus0/target0/lun0/part6 raid0: comparing ide/host0/bus0/target0/lun0/part6(3076352) with ide/host1/bus0/target0/lun0/part5(3076352) raid0: EQUAL raid0: FINAL 1 zones raid0: done. raid0 : md_size is 6152704 blocks. raid0 : conf->smallest->size is 6152704 blocks. raid0 : nb_zone is 1. raid0 : Allocating 8 bytes for hash. md: marking sb clean... md: marking sb clean... md: updating md1 RAID superblock on device (in sync 1) md: ide/host1/bus0/target0/lun0/part5 <6>(write) ide/host1/bus0/target0/lun0/part5's sb offset: 3076352 md: ide/host0/bus0/target0/lun0/part6 <6>(write) ide/host0/bus0/target0/lun0/part6's sb offset: 3076352 md: considering ide/host1/bus0/target0/lun0/part3 ... md: adding ide/host1/bus0/target0/lun0/part3 ... md: adding ide/host0/bus0/target0/lun0/part2 ... md: created md0 md: bind md: bind md: running: md0: max total readahead window set to 512k md0: 2 data-disks, max readahead per data-disk: 256k md0: setting max_sectors to 128, segment boundary to 32767 raid0: looking at ide/host1/bus0/target0/lun0/part3 raid0: comparing ide/host1/bus0/target0/lun0/part3(8193024) with ide/host1/bus0/target0/lun0/part3(8193024) raid0: END raid0: ==> UNIQUE raid0: 1 zones raid0: looking at ide/host0/bus0/target0/lun0/part2 raid0: comparing ide/host0/bus0/target0/lun0/part2(8193024) with ide/host1/bus0/target0/lun0/part3(8193024) raid0: EQUAL raid0: FINAL 1 zones raid0: done. raid0 : md_size is 16386048 blocks. raid0 : conf->smallest->size is 16386048 blocks. raid0 : nb_zone is 1. raid0 : Allocating 8 bytes for hash. md: marking sb clean... md: marking sb clean... md: updating md0 RAID superblock on device (in sync 1) md: ide/host1/bus0/target0/lun0/part3 <6>(write) ide/host1/bus0/target0/lun0/part3's sb offset: 8193024 md: ide/host0/bus0/target0/lun0/part2 <6>(write) ide/host0/bus0/target0/lun0/part2's sb offset: 8193024 md: ... autorun DONE. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 348k freed Adding 1020116k swap on /dev/hdc2. Priority:-1 extents:1 Adding 1020116k swap on /dev/hda3. Priority:-2 extents:1 EXT3 FS 2.4-0.9.16, 02 Dec 2001 on ide0(3,5), internal journal kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.16, 02 Dec 2001 on ide0(3,1), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.16, 02 Dec 2001 on ide0(3,8), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.16, 02 Dec 2001 on md(9,0), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.16, 02 Dec 2001 on md(9,1), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.16, 02 Dec 2001 on md(9,2), internal journal EXT3-fs: mounted filesystem with ordered data mode.