On Mon, 10 Mar 2003, Douglas Gilbert wrote:
> The experience from the early 2.4 series was that the ide
> subsystem was too aggressive in its DMA settings for CD/DVD
> burners. [My experience with scsi devices is that disks have
> much better target implementations (i.e. more robust) than
> CD/DVD devices and scanners.] Later versions of the 2.4 series
ATAPI scanners? Cool stuff. Seriously, there is cheap ATAPI junk and
there is serious stuff.
> are a lot more conservative in their speed treatment of ATAPI
> devices. The robustness comes at the expense of system load.
Well, some amount of configurability would be nice for the ones of us
who have working ATAPI hardware. Even if it's a boot-time parameter like
"hdc=atapidma" or something (that's what FreeBSD does, with the
boot-time variable hw.ata.atapi_dma, it defaults to 0 but drop
hw.ata.atapi_dma="1" into /boot/loader.conf.local and have the machine
talk DMA to ATAPI stuff). Am I missing such an option?
I am currently facing the choice "switch to some other OS that talks DMA
to my CD-writer" or "buy an ATAPI-SCSI-converter" (which is above 100
EUR). I'd like to have a third option to choose, tell the kernel "forget
your sorrows and talk DMA." -- it could use a (user-space) whitelist,
say "Plextor CD-R 4824TA 1.04 is fine".
> ** Even though a CD writer appears as /dev/scd0 with ide-scsi
> appropriately configured, the hdparm command can still be used
> on /dev/hdd (for example, if the writer is the slave on the
> second IDE bus).
/sbin/hdparm -X66 -d1 -u1 happens at boot time (for hdc) -- still I'm
facing unreasonably high system load when writing a CD.
-- Matthias Andree - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sat Mar 15 2003 - 22:00:21 EST