ChangeSet 1.1108, 2003/03/13 11:38:03-08:00, greg@kroah.com
i2c: get i2c-i801 driver to actually bind to a PCI device.
drivers/i2c/busses/i2c-i801.c | 74 +++++++++++++++++++++---------------------
1 files changed, 38 insertions(+), 36 deletions(-)
diff -Nru a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
--- a/drivers/i2c/busses/i2c-i801.c Thu Mar 13 16:57:41 2003
+++ b/drivers/i2c/busses/i2c-i801.c Thu Mar 13 16:57:41 2003
@@ -128,49 +128,21 @@
static int i801_block_transaction(union i2c_smbus_data *data,
char read_write, int command);
+static unsigned short i801_smba;
+static struct pci_dev *I801_dev;
+static int isich4;
-
-
-static unsigned short i801_smba = 0;
-static struct pci_dev *I801_dev = NULL;
-static int isich4 = 0;
-
-/* Detect whether a I801 can be found, and initialize it, where necessary.
- Note the differences between kernels with the old PCI BIOS interface and
- newer kernels with the real PCI interface. In compat.h some things are
- defined to make the transition easier. */
-int i801_setup(void)
+static int i801_setup(struct pci_dev *dev)
{
int error_return = 0;
int *num = supported;
unsigned char temp;
- /* First check whether we can access PCI at all */
- if (pci_present() == 0) {
- printk(KERN_WARNING "i2c-i801.o: Error: No PCI-bus found!\n");
- error_return = -ENODEV;
- goto END;
- }
-
- /* Look for each chip */
/* Note: we keep on searching until we have found 'function 3' */
- I801_dev = NULL;
- do {
- if((I801_dev = pci_find_device(PCI_VENDOR_ID_INTEL,
- *num, I801_dev))) {
- if(PCI_FUNC(I801_dev->devfn) != 3)
- continue;
- break;
- }
- num++;
- } while (*num != 0);
+ if(PCI_FUNC(dev->devfn) != 3)
+ return -ENODEV;
- if (I801_dev == NULL) {
- printk
- (KERN_WARNING "i2c-i801.o: Error: Can't detect I801, function 3!\n");
- error_return = -ENODEV;
- goto END;
- }
+ I801_dev = dev;
isich4 = *num == PCI_DEVICE_ID_INTEL_82801DB_SMBUS;
/* Determine the address of the SMBus areas */
@@ -658,13 +630,43 @@
static struct pci_device_id i801_ids[] __devinitdata = {
+ {
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = PCI_DEVICE_ID_INTEL_82801AA_3,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = PCI_DEVICE_ID_INTEL_82801AB_3,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = PCI_DEVICE_ID_INTEL_82801BA_2,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = PCI_DEVICE_ID_INTEL_82801CA_SMBUS,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = PCI_DEVICE_ID_INTEL_82801DB_SMBUS,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ },
{ 0, }
};
static int __devinit i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
{
- if (i801_setup()) {
+ if (i801_setup(dev)) {
printk
(KERN_WARNING "i2c-i801.o: I801 not detected, module not inserted.\n");
return -ENODEV;
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sat Mar 15 2003 - 22:00:37 EST