ChangeSet 1.1109, 2003/03/13 11:52:26-08:00, greg@kroah.com
i2c: add bus driver for Intel PIIX4 devices
This is from the i2c CVS tree.
drivers/i2c/busses/Kconfig | 25 +
drivers/i2c/busses/Makefile | 1
drivers/i2c/busses/i2c-piix4.c | 529 +++++++++++++++++++++++++++++++++++++++++
3 files changed, 554 insertions(+), 1 deletion(-)
diff -Nru a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
--- a/drivers/i2c/busses/Kconfig Thu Mar 13 16:57:33 2003
+++ b/drivers/i2c/busses/Kconfig Thu Mar 13 16:57:33 2003
@@ -55,7 +55,7 @@
config I2C_I801
tristate " Intel 801"
- depends on I2C && I2C_PROC
+ depends on I2C && I2C_PROC && PCI && EXPERIMENTAL
help
If you say yes to this option, support will be included for the Intel
801 family of mainboard I2C interfaces. Specifically, the following
@@ -71,6 +71,29 @@
say M here and read <file:Documentation/modules.txt>.
The module will be called i2c-i801.
+
+ You will also need the latest user-space utilties: you can find them
+ in the lm_sensors package, which you can download at
+ http://www.lm-sensors.nu
+
+config I2C_PIIX4
+ tristate " Intel PIIX4"
+ depends on I2C && I2C_PROC && PCI && EXPERIMENTAL
+ help
+ If you say yes to this option, support will be included for the Intel
+ PIIX4 family of mainboard I2C interfaces. Specifically, the following
+ versions of the chipset is supported:
+ Intel PIIX4
+ Intel 440MX
+ Serverworks OSB4
+ Serverworks CSB5
+ SMSC Victory66
+
+ This can also be built as a module which can be inserted and removed
+ while the kernel is running. If you want to compile it as a module,
+ say M here and read <file:Documentation/modules.txt>.
+
+ The module will be called i2c-piix4.
You will also need the latest user-space utilties: you can find them
in the lm_sensors package, which you can download at
diff -Nru a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
--- a/drivers/i2c/busses/Makefile Thu Mar 13 16:57:33 2003
+++ b/drivers/i2c/busses/Makefile Thu Mar 13 16:57:33 2003
@@ -6,3 +6,4 @@
obj-$(CONFIG_I2C_AMD756) += i2c-amd756.o
obj-$(CONFIG_I2C_AMD8111) += i2c-amd8111.o
obj-$(CONFIG_I2C_I801) += i2c-i801.o
+obj-$(CONFIG_I2C_PIIX4) += i2c-piix4.o
diff -Nru a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c
--- /dev/null Wed Dec 31 16:00:00 1969
+++ b/drivers/i2c/busses/i2c-piix4.c Thu Mar 13 16:57:33 2003
@@ -0,0 +1,529 @@
+/*
+ piix4.c - Part of lm_sensors, Linux kernel modules for hardware
+ monitoring
+ Copyright (c) 1998 - 2002 Frodo Looijaard <frodol@dds.nl> and
+ Philip Edelbrock <phil@netroedge.com>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+/*
+ Supports:
+ Intel PIIX4, 440MX
+ Serverworks OSB4, CSB5
+ SMSC Victory66
+
+ Note: we assume there can only be one device, with one SMBus interface.
+*/
+
+#include <linux/version.h>
+#include <linux/module.h>
+#include <linux/config.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/stddef.h>
+#include <linux/sched.h>
+#include <linux/ioport.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/apm_bios.h>
+#include <asm/io.h>
+
+
+struct sd {
+ const unsigned short mfr;
+ const unsigned short dev;
+ const unsigned char fn;
+ const char *name;
+};
+
+/* Note: We assume all devices are identical
+ to the Intel PIIX4; we only mention it during detection. */
+
+static struct sd supported[] = {
+ {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3, 3, "PIIX4"},
+ {PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_OSB4, 0, "OSB4"},
+ {PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB5, 0, "CSB5"},
+ {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443MX_3, 3, "440MX"},
+ {PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_3, 0, "Victory66"},
+ {0, 0, 0, NULL}
+};
+
+/* PIIX4 SMBus address offsets */
+#define SMBHSTSTS (0 + piix4_smba)
+#define SMBHSLVSTS (1 + piix4_smba)
+#define SMBHSTCNT (2 + piix4_smba)
+#define SMBHSTCMD (3 + piix4_smba)
+#define SMBHSTADD (4 + piix4_smba)
+#define SMBHSTDAT0 (5 + piix4_smba)
+#define SMBHSTDAT1 (6 + piix4_smba)
+#define SMBBLKDAT (7 + piix4_smba)
+#define SMBSLVCNT (8 + piix4_smba)
+#define SMBSHDWCMD (9 + piix4_smba)
+#define SMBSLVEVT (0xA + piix4_smba)
+#define SMBSLVDAT (0xC + piix4_smba)
+
+/* PCI Address Constants */
+#define SMBBA 0x090
+#define SMBHSTCFG 0x0D2
+#define SMBSLVC 0x0D3
+#define SMBSHDW1 0x0D4
+#define SMBSHDW2 0x0D5
+#define SMBREV 0x0D6
+
+/* Other settings */
+#define MAX_TIMEOUT 500
+#define ENABLE_INT9 0
+
+/* PIIX4 constants */
+#define PIIX4_QUICK 0x00
+#define PIIX4_BYTE 0x04
+#define PIIX4_BYTE_DATA 0x08
+#define PIIX4_WORD_DATA 0x0C
+#define PIIX4_BLOCK_DATA 0x14
+
+/* insmod parameters */
+
+/* If force is set to anything different from 0, we forcibly enable the
+ PIIX4. DANGEROUS! */
+static int force = 0;
+MODULE_PARM(force, "i");
+MODULE_PARM_DESC(force, "Forcibly enable the PIIX4. DANGEROUS!");
+
+/* If force_addr is set to anything different from 0, we forcibly enable
+ the PIIX4 at the given address. VERY DANGEROUS! */
+static int force_addr = 0;
+MODULE_PARM(force_addr, "i");
+MODULE_PARM_DESC(force_addr,
+ "Forcibly enable the PIIX4 at the given address. "
+ "EXTREMELY DANGEROUS!");
+
+static void piix4_do_pause(unsigned int amount);
+static int piix4_transaction(void);
+
+
+static unsigned short piix4_smba = 0;
+
+#ifdef CONFIG_X86
+/*
+ * Get DMI information.
+ */
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,34)
+void dmi_scan_mach(void);
+#endif
+
+static int __init ibm_dmi_probe(void)
+{
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,34)
+ extern int is_unsafe_smbus;
+ return is_unsafe_smbus;
+#else
+#define IBM_SIGNATURE "IBM"
+ dmi_scan_mach();
+ if(dmi_ident[DMI_SYS_VENDOR] == NULL)
+ return 0;
+ if(strncmp(dmi_ident[DMI_SYS_VENDOR], IBM_SIGNATURE,
+ strlen(IBM_SIGNATURE)) == 0)
+ return 1;
+ return 0;
+#endif
+}
+#endif
+
+/* Detect whether a PIIX4 can be found, and initialize it, where necessary.
+ Note the differences between kernels with the old PCI BIOS interface and
+ newer kernels with the real PCI interface. In compat.h some things are
+ defined to make the transition easier. */
+int piix4_setup(void)
+{
+ int error_return = 0;
+ unsigned char temp;
+ struct sd *num = supported;
+ struct pci_dev *PIIX4_dev = NULL;
+
+ if (pci_present() == 0) {
+ error_return = -ENODEV;
+ goto END;
+ }
+
+ /* Look for a supported device/function */
+ do {
+ if((PIIX4_dev = pci_find_device(num->mfr, num->dev,
+ PIIX4_dev))) {
+ if(PCI_FUNC(PIIX4_dev->devfn) != num->fn)
+ continue;
+ break;
+ }
+ PIIX4_dev = NULL;
+ num++;
+ } while (num->mfr);
+
+ if (PIIX4_dev == NULL) {
+ printk
+ (KERN_ERR "i2c-piix4.o: Error: Can't detect PIIX4 or compatible device!\n");
+ error_return = -ENODEV;
+ goto END;
+ }
+ printk(KERN_INFO "i2c-piix4.o: Found %s device\n", num->name);
+
+#ifdef CONFIG_X86
+ if(ibm_dmi_probe()) {
+ printk
+ (KERN_ERR "i2c-piix4.o: IBM Laptop detected; this module may corrupt\n");
+ printk
+ (KERN_ERR " your serial eeprom! Refusing to load module!\n");
+ error_return = -EPERM;
+ goto END;
+ }
+#endif
+
+/* Determine the address of the SMBus areas */
+ if (force_addr) {
+ piix4_smba = force_addr & 0xfff0;
+ force = 0;
+ } else {
+ pci_read_config_word(PIIX4_dev, SMBBA, &piix4_smba);
+ piix4_smba &= 0xfff0;
+ if(piix4_smba == 0) {
+ printk(KERN_ERR "i2c-piix4.o: SMB base address uninitialized - upgrade BIOS or use force_addr=0xaddr\n");
+ return -ENODEV;
+ }
+ }
+
+ if (check_region(piix4_smba, 8)) {
+ printk
+ (KERN_ERR "i2c-piix4.o: SMB region 0x%x already in use!\n",
+ piix4_smba);
+ error_return = -ENODEV;
+ goto END;
+ }
+
+ pci_read_config_byte(PIIX4_dev, SMBHSTCFG, &temp);
+/* If force_addr is set, we program the new address here. Just to make
+ sure, we disable the PIIX4 first. */
+ if (force_addr) {
+ pci_write_config_byte(PIIX4_dev, SMBHSTCFG, temp & 0xfe);
+ pci_write_config_word(PIIX4_dev, SMBBA, piix4_smba);
+ pci_write_config_byte(PIIX4_dev, SMBHSTCFG, temp | 0x01);
+ printk
+ (KERN_INFO "i2c-piix4.o: WARNING: SMBus interface set to new "
+ "address %04x!\n", piix4_smba);
+ } else if ((temp & 1) == 0) {
+ if (force) {
+/* This should never need to be done, but has been noted that
+ many Dell machines have the SMBus interface on the PIIX4
+ disabled!? NOTE: This assumes I/O space and other allocations WERE
+ done by the Bios! Don't complain if your hardware does weird
+ things after enabling this. :') Check for Bios updates before
+ resorting to this. */
+ pci_write_config_byte(PIIX4_dev, SMBHSTCFG,
+ temp | 1);
+ printk
+ (KERN_NOTICE "i2c-piix4.o: WARNING: SMBus interface has been FORCEFULLY "
+ "ENABLED!\n");
+ } else {
+ printk
+ (KERN_ERR "i2c-piix4.o: Host SMBus controller not enabled!\n");
+ error_return = -ENODEV;
+ goto END;
+ }
+ }
+
+ /* Everything is happy, let's grab the memory and set things up. */
+ request_region(piix4_smba, 8, "piix4-smbus");
+
+#ifdef DEBUG
+ if ((temp & 0x0E) == 8)
+ printk
+ (KERN_DEBUG "i2c-piix4.o: Using Interrupt 9 for SMBus.\n");
+ else if ((temp & 0x0E) == 0)
+ printk
+ (KERN_DEBUG "i2c-piix4.o: Using Interrupt SMI# for SMBus.\n");
+ else
+ printk
+ (KERN_ERR "i2c-piix4.o: Illegal Interrupt configuration (or code out "
+ "of date)!\n");
+
+ pci_read_config_byte(PIIX4_dev, SMBREV, &temp);
+ printk(KERN_DEBUG "i2c-piix4.o: SMBREV = 0x%X\n", temp);
+ printk(KERN_DEBUG "i2c-piix4.o: SMBA = 0x%X\n", piix4_smba);
+#endif /* DEBUG */
+
+ END:
+ return error_return;
+}
+
+
+/* Internally used pause function */
+void piix4_do_pause(unsigned int amount)
+{
+ current->state = TASK_INTERRUPTIBLE;
+ schedule_timeout(amount);
+}
+
+/* Another internally used function */
+int piix4_transaction(void)
+{
+ int temp;
+ int result = 0;
+ int timeout = 0;
+
+#ifdef DEBUG
+ printk
+ (KERN_DEBUG "i2c-piix4.o: Transaction (pre): CNT=%02x, CMD=%02x, ADD=%02x, DAT0=%02x, "
+ "DAT1=%02x\n", inb_p(SMBHSTCNT), inb_p(SMBHSTCMD),
+ inb_p(SMBHSTADD), inb_p(SMBHSTDAT0), inb_p(SMBHSTDAT1));
+#endif
+
+ /* Make sure the SMBus host is ready to start transmitting */
+ if ((temp = inb_p(SMBHSTSTS)) != 0x00) {
+#ifdef DEBUG
+ printk(KERN_DEBUG "i2c-piix4.o: SMBus busy (%02x). Resetting... \n",
+ temp);
+#endif
+ outb_p(temp, SMBHSTSTS);
+ if ((temp = inb_p(SMBHSTSTS)) != 0x00) {
+#ifdef DEBUG
+ printk(KERN_ERR "i2c-piix4.o: Failed! (%02x)\n", temp);
+#endif
+ return -1;
+ } else {
+#ifdef DEBUG
+ printk(KERN_DEBUG "i2c-piix4.o: Successfull!\n");
+#endif
+ }
+ }
+
+ /* start the transaction by setting bit 6 */
+ outb_p(inb(SMBHSTCNT) | 0x040, SMBHSTCNT);
+
+ /* We will always wait for a fraction of a second! (See PIIX4 docs errata) */
+ do {
+ piix4_do_pause(1);
+ temp = inb_p(SMBHSTSTS);
+ } while ((temp & 0x01) && (timeout++ < MAX_TIMEOUT));
+
+#ifdef DEBUG
+ /* If the SMBus is still busy, we give up */
+ if (timeout >= MAX_TIMEOUT) {
+ printk(KERN_ERR "i2c-piix4.o: SMBus Timeout!\n");
+ result = -1;
+ }
+#endif
+
+ if (temp & 0x10) {
+ result = -1;
+#ifdef DEBUG
+ printk(KERN_ERR "i2c-piix4.o: Error: Failed bus transaction\n");
+#endif
+ }
+
+ if (temp & 0x08) {
+ result = -1;
+ printk
+ (KERN_ERR "i2c-piix4.o: Bus collision! SMBus may be locked until next hard\n"
+ "reset. (sorry!)\n");
+ /* Clock stops and slave is stuck in mid-transmission */
+ }
+
+ if (temp & 0x04) {
+ result = -1;
+#ifdef DEBUG
+ printk(KERN_ERR "i2c-piix4.o: Error: no response!\n");
+#endif
+ }
+
+ if (inb_p(SMBHSTSTS) != 0x00)
+ outb_p(inb(SMBHSTSTS), SMBHSTSTS);
+
+#ifdef DEBUG
+ if ((temp = inb_p(SMBHSTSTS)) != 0x00) {
+ printk
+ (KERN_ERR "i2c-piix4.o: Failed reset at end of transaction (%02x)\n",
+ temp);
+ }
+ printk
+ (KERN_DEBUG "i2c-piix4.o: Transaction (post): CNT=%02x, CMD=%02x, ADD=%02x, "
+ "DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT), inb_p(SMBHSTCMD),
+ inb_p(SMBHSTADD), inb_p(SMBHSTDAT0), inb_p(SMBHSTDAT1));
+#endif
+ return result;
+}
+
+/* Return -1 on error. */
+s32 piix4_access(struct i2c_adapter * adap, u16 addr,
+ unsigned short flags, char read_write,
+ u8 command, int size, union i2c_smbus_data * data)
+{
+ int i, len;
+
+ switch (size) {
+ case I2C_SMBUS_PROC_CALL:
+ printk
+ (KERN_ERR "i2c-piix4.o: I2C_SMBUS_PROC_CALL not supported!\n");
+ return -1;
+ case I2C_SMBUS_QUICK:
+ outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+ SMBHSTADD);
+ size = PIIX4_QUICK;
+ break;
+ case I2C_SMBUS_BYTE:
+ outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+ SMBHSTADD);
+ if (read_write == I2C_SMBUS_WRITE)
+ outb_p(command, SMBHSTCMD);
+ size = PIIX4_BYTE;
+ break;
+ case I2C_SMBUS_BYTE_DATA:
+ outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+ SMBHSTADD);
+ outb_p(command, SMBHSTCMD);
+ if (read_write == I2C_SMBUS_WRITE)
+ outb_p(data->byte, SMBHSTDAT0);
+ size = PIIX4_BYTE_DATA;
+ break;
+ case I2C_SMBUS_WORD_DATA:
+ outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+ SMBHSTADD);
+ outb_p(command, SMBHSTCMD);
+ if (read_write == I2C_SMBUS_WRITE) {
+ outb_p(data->word & 0xff, SMBHSTDAT0);
+ outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1);
+ }
+ size = PIIX4_WORD_DATA;
+ break;
+ case I2C_SMBUS_BLOCK_DATA:
+ outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+ SMBHSTADD);
+ outb_p(command, SMBHSTCMD);
+ if (read_write == I2C_SMBUS_WRITE) {
+ len = data->block[0];
+ if (len < 0)
+ len = 0;
+ if (len > 32)
+ len = 32;
+ outb_p(len, SMBHSTDAT0);
+ i = inb_p(SMBHSTCNT); /* Reset SMBBLKDAT */
+ for (i = 1; i <= len; i++)
+ outb_p(data->block[i], SMBBLKDAT);
+ }
+ size = PIIX4_BLOCK_DATA;
+ break;
+ }
+
+ outb_p((size & 0x1C) + (ENABLE_INT9 & 1), SMBHSTCNT);
+
+ if (piix4_transaction()) /* Error in transaction */
+ return -1;
+
+ if ((read_write == I2C_SMBUS_WRITE) || (size == PIIX4_QUICK))
+ return 0;
+
+
+ switch (size) {
+ case PIIX4_BYTE: /* Where is the result put? I assume here it is in
+ SMBHSTDAT0 but it might just as well be in the
+ SMBHSTCMD. No clue in the docs */
+
+ data->byte = inb_p(SMBHSTDAT0);
+ break;
+ case PIIX4_BYTE_DATA:
+ data->byte = inb_p(SMBHSTDAT0);
+ break;
+ case PIIX4_WORD_DATA:
+ data->word = inb_p(SMBHSTDAT0) + (inb_p(SMBHSTDAT1) << 8);
+ break;
+ case PIIX4_BLOCK_DATA:
+ data->block[0] = inb_p(SMBHSTDAT0);
+ i = inb_p(SMBHSTCNT); /* Reset SMBBLKDAT */
+ for (i = 1; i <= data->block[0]; i++)
+ data->block[i] = inb_p(SMBBLKDAT);
+ break;
+ }
+ return 0;
+}
+
+
+u32 piix4_func(struct i2c_adapter *adapter)
+{
+ return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
+ I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
+ I2C_FUNC_SMBUS_BLOCK_DATA;
+}
+
+static struct i2c_algorithm smbus_algorithm = {
+ .name = "Non-I2C SMBus adapter",
+ .id = I2C_ALGO_SMBUS,
+ .smbus_xfer = piix4_access,
+ .functionality = piix4_func,
+};
+
+static struct i2c_adapter piix4_adapter = {
+ .owner = THIS_MODULE,
+ .name = "unset",
+ .id = I2C_ALGO_SMBUS | I2C_HW_SMBUS_PIIX4,
+ .algo = &smbus_algorithm,
+};
+
+
+
+static struct pci_device_id piix4_ids[] __devinitdata = {
+ { 0, }
+};
+
+static int __devinit piix4_probe(struct pci_dev *dev, const struct pci_device_id *id)
+{
+
+ sprintf(piix4_adapter.name, "SMBus PIIX4 adapter at %04x",
+ piix4_smba);
+
+ i2c_add_adapter(&piix4_adapter);
+}
+
+static void __devexit piix4_remove(struct pci_dev *dev)
+{
+ i2c_del_adapter(&piix4_adapter);
+}
+
+
+static struct pci_driver piix4_driver = {
+ .name = "piix4 smbus",
+ .id_table = piix4_ids,
+ .probe = piix4_probe,
+ .remove = __devexit_p(piix4_remove),
+};
+
+static int __init i2c_piix4_init(void)
+{
+ printk("i2c-piix4.o version %s (%s)\n", I2C_VERSION, I2C_DATE);
+ return pci_module_init(&piix4_driver);
+}
+
+
+static void __exit i2c_piix4_exit(void)
+{
+ pci_unregister_driver(&piix4_driver);
+ release_region(piix4_smba, 8);
+}
+
+
+
+MODULE_AUTHOR
+ ("Frodo Looijaard <frodol@dds.nl> and Philip Edelbrock <phil@netroedge.com>");
+MODULE_DESCRIPTION("PIIX4 SMBus driver");
+MODULE_LICENSE("GPL");
+
+module_init(i2c_piix4_init);
+module_exit(i2c_piix4_exit);
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sat Mar 15 2003 - 22:00:37 EST