ksymoops 2.4.8 on i686 2.4.21-pre5.  Options used
     -V (specified)
     -k /proc/ksyms (default)
     -l /proc/modules (default)
     -o /lib/modules/2.4.21-pre5/ (default)
     -m /boot/System.map-2.4.21-pre5 (default)

f9C4ƒŒ‹SD…Òt‹K@
Ê;ÐR8Àvgf…ÀufÇC6fÿC4Vè
<4>Warning: null TTY for (%s) in %s
Pid: %d, comm: %20s
EIP: %04x:[<%08lx>] CPU: %d EFLAGS: %08lx    %s
 DS: %04x ES: %04x
Call Trace:    [<%08lx>]
Stack: 
Code:  Bad EIP value.<bad filename>kernel BUG at %s:%d!
Using defaults from ksymoops -t elf32-i386 -a i386


<6>testing NMI watchdog ... console shuts up ...
ESI: %08lx EDI: %08lx EBP: %08lxCR0: %08lx CR2: %08lx CR3: %08lx CR4: %08lx
WARNING: dead process %8s still has LDT? <%p>
EIP:    %04x:[<%08lx>]    %s
EFLAGS: %08lx
eax: %08lx   ebx: %08lx   ecx: %08lx   edx: %08lx
esi: %08lx   edi: %08lx   ebp: %08lx   esp: %08lx
ds: %04x   es: %04x   ss: %04x
Process %s (pid: %d, stackpage=%08lx)Uhhuh. NMI received. Dazed and confused, but trying to continue
NMI: IOCK error (debug interrupt?)
Uhhuh. NMI received for unknown reason %02x.
<6>AMD K6 stepping B detected - <6>K6 BUG %ld %d (Report these if test report is incorrect)
<5>Intel Pentium with F0 0F bug - workaround enabled.
fdiv_bug        : %s
hlt_bug         : %s
f00f_bug        : %s
coma_bug        : %s
<6> *** Building an SMP kernel may evade the bug some of the time.
<6>%s machine detected. Mousepad Resume Bug workaround enabled.
<3>PCI: BIOS BUG #%x[%08x] found
<3>WARNING: bogus zero I/O APIC address found in MP table, skipping!
<3>WARNING: bogus zero IO-APIC address found in MPTABLE, disabling IO/APIC support!
CPU#%d: NMI appears to be stuck!
NMI Watchdog detected LOCKUP on CPU%d, eip %08lx, registers:
<7>0123456789abcdef0123456789abcdef
<2>Aieee!!!  Remote IRR still set after unlock!
<6>activating NMI Watchdog ...<6>..TIMER: vector=0x%02X pin1=%d pin2=%d
<6>...trying to set up timer (IRQ0) through the 8259A ... <6>...trying to set up timer as Virtual Wire IRQ...<6>...trying to set up timer as ExtINT IRQ...<4>timer doesn't work through the IO-APIC - disabling NMI Watchdog!
<6>LAPIC_NMI (acpi_id[0x%04x] polarity[0x%x] trigger[0x%x] lint[0x%x])
PAE BUG #01!
<1>*pde = %08lx
<1>Unable to handle kernel NULL pointer dereference<1>Unable to handle kernel paging requestremap_area_pte: page already exists
kernel BUG in header file at line %d
<3>inter_module_register: duplicate im_name '%s'<3>Aiee, inter_module_register: cannot kmalloc entry for '%s'
Aiee, killing interrupt handler!Attempted to kill the idle task!Attempt to kill tasklet from interrupt
%-13.13s  %08lX %5lu %5d %6d %5d %7d %5d (L-TLB)
 (NOTLB)
Warning (Oops_read): Code line not seen, dumping what data is available

Proc;  %-13.13s

>>EIP; 00000008 Before first symbol   <=====

Pid:    %d
<4>Warning: defective CD-ROM.  Enabling "cruft" mount option.
exp_rootfh: Aieee, ino/dev mismatch
exp_rootfh: Aieee, NULL d_inode
  Acceptable configuration
Internal error - unknown field creation opcode %02x
Warning: No result object pushed! State=%p
**** Write to Debug Object: ****:
<4>Warning: dev (%s) tty->count(%d) != #fd's(%d) in %s
OEM i82557/i82558 10/100 Ethernet<6>  Receiver lock-up bug exists -- enabling work-around.
noctxtdfx_parse_option<6>[drm] Debug messages ON
, UDMA(16), UDMA(25), UDMA(33), UDMA(44), UDMA(66), UDMA(100), UDMA(133), UDMA(mode 7), (U)DMA, BUG DMA OFF, DMA, BUG__ide_dma_retune%s: DMA interrupt recovery
810a825825a875875J895896895a875a1510D1010-331010-66devtblwith Tekram NVRAMwith Symbios NVRAM PCI_COMMAND_PARITY PCI_COMMAND_MASTERsym53c8xx-1.7.3c-20010512setsyncphaseresulttinytimingnegoorderedno_discsettagssetordersetverbosesetwidesetdebugsetflagresetdevcleardevGeneral information:
Internal error %s %d 
Internal error in file %s, line %d.
internal error: cmd=%02x != %02x=(vdsp[0] >> 24)
  Debug flags 0x%x, verbosity level %d
               Creative ES137x Debug Dump-o-matic
<3>ac97_codec: %s ac97 codec not present
<6>ac97_codec: AC97 %s codec, id: %s (%s)
AC97 CODEC state
<6>cs: cb_free(bus %d)
<6>cs: IO port probe 0x%04x-0x%04x:<3>do_io_probe: unable to kmalloc 256 bytes<6>cs: memory probe 0x%06lx-0x%06lx:<5>cs: warning: no high memory space available!
<5>cs: MTD request timed out!
<5>cs: do_mtd_request interrupted!
<5>cs: setup_regions: kmalloc failed!
<5>ds: unable to create instance of '%s'!
<5>ds: unable to bind MTD '%s' to socket %d offset 0x%x
<5>ds: unable to bind '%s' to socket %d
<5>ds: Card Services release does not match!
<5>ds: no socket drivers loaded!
<5>cs: socket %p: unsupported voltage key
<5>cs: socket %p timed out during reset.  Try increasing setup_delay.
<6>cs: cb_alloc(bus %d): vendor 0x%04x, device 0x%04x
10baseT10base2pcnet_cs.cNE2000io %#3lx, irq %d, hw_addr %02X%s %s xcvr, mem %#5lx,PNA, <6>%s: NE2000 Compatible: <6>%s: switched to %s port
Beacon Interval      = %d Kus
mcast_solicitucast_solicitapp_solicitretrans_timebase_reachable_timedelay_first_probe_timegc_stale_timeunres_qlenproxy_qlenanycast_delayproxy_delaylocktimegc_intervalgc_thresh1gc_thresh2gc_thresh3neigh802.3<6>%s: activation failed
<4>Warning: kfree_skb on hard IRQ %p
<4>Warning: kfree_skb passed an skb still on a list (from %p).
<2>Dead loop on virtual device %s, fix it urgently!
 face |bytes    packets errs drop fifo frame compressed multicast|bytes    packets errs drop fifo colls carrier compressed
 face | tus | link level noise |  nwid  crypt   frag  retry   misc | beacon
<2>Bug in ip_route_input_slow(). Please, report

1 warning issued.  Results may not be reliable.