Applied.
>
> Hi,
> radeonfb is unable to acquire the pll clock values from the BIOS on
> newer radeon cards and uses default values which don't work.
>
> Using ATI binary driver for X I founded this in the log:
>
> (II) fglrx(0): PLL parameters: rf=2700 rd=12 min=20000 max=40000; xclk=27000
>
> This patch (against 2.5.65) sets pll values according to X:
>
> --- drivers/video/radeonfb.orig.c Sun Mar 23 16:15:04 2003
> +++ drivers/video/radeonfb.c Sun Mar 23 18:01:48 2003
> @@ -881,6 +881,16 @@
> rinfo->pll.ref_div = 12;
> rinfo->pll.ref_clk = 2700;
> break;
> + case PCI_DEVICE_ID_ATI_RADEON_ND:
> + case PCI_DEVICE_ID_ATI_RADEON_NE:
> + case PCI_DEVICE_ID_ATI_RADEON_NF:
> + case PCI_DEVICE_ID_ATI_RADEON_NG:
> + rinfo->pll.ppll_max = 40000;
> + rinfo->pll.ppll_min = 20000;
> + rinfo->pll.xclk = 27000;
> + rinfo->pll.ref_div = 12;
> + rinfo->pll.ref_clk = 2700;
> + break;
> case PCI_DEVICE_ID_ATI_RADEON_QD:
> case PCI_DEVICE_ID_ATI_RADEON_QE:
> case PCI_DEVICE_ID_ATI_RADEON_QF:
>
>
> It works on a R300 NE (9500 Pro), but should be ok also for the other
> R300 chips (don't have the hw to make a test though).
>
> In X log there is also this line:
>
> (II) fglrx(0): Primary V_BIOS segment is: 0xc000
>
> I've no idea of what V_BIOS is (Video BIOS?), but it may be useful ;)
>
>
> HTH,
> Luca
>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Mon Mar 31 2003 - 22:00:16 EST