Script started on Thu Mar 27 19:49:28 2003
$ sscreen -x
[?1049h[r[H[?7h[?1;4;6l[4l[?1h=(B[1;24r[H[H
Broadcast message from root (ttyS0) (Thu Mar 27 19:34:56 2003):
The system is going down for system halt NOW!
INIT: Sending processes the TERM signal
INIT:Stopping internet superserver: inetd.
Stopping network benchmark server: netserver.
Stopping OpenBSD Secure Shell server: sshd.
Stopping NTP server: ntpd.
Saving the System Clock time to the Hardware Clock...
Hardware Clock updated to Thu Mar 27 19:35:04 PST 2003.
Stopping kernel log daemon: klogd.
Stopping system log daemon: syslogd.
Sending all processes the TERM signal... done.
Sending all processes the KILL signal... done.
Saving random seed... done.
Unmounting remote filesystems... done.
Deconfiguring network interfaces... done.
Deactivating swap... done.
Unmounting local filesystems... done.
Synchronizing SCSI caches:
Shutting down devices
Power down.
Press any key to continue.
Press any key to continue.
Press any key to continue.
Press any key to continue.
Press any key to continue.
Press any key to continue.
Press any key to continue.
Press any key to continue.
Press any key to continue.
Press any key to continue.
[H[H
GRUB version 0.92 (639K lower / 3144704K upper memory)
+-------------------------------------------------------------------------+
||
||
||
||
||
||
||
||
||
||
||
||
+-------------------------------------------------------------------------+
Use the ^ and v keys to select which entry is highlighted.
Press enter to boot the selected OS, 'e' to edit the
commands before booting, or 'c' for a command-line.[5;78H | Boot Debian Install (single quad) (hd0,0) |
Boot Debian Install (multiquad <= 8, 1gig) (hd0,0) |
maneesh's test kernel |
install grub on sda |
|
|
|
|
|
|
|
| [5;3H Boot Debian Install (single quad) (hd0,0) [H[H
GRUB version 0.92 (639K lower / 3144704K upper memory)
[ Minimal BASH-like line editing is supported. For the first word, TAB
lists possible command completions. Anywhere else TAB lists the possible
completions of a device/filename. ESC at any time exits. ]
grub> root (hd0,1)
Filesystem type is ext2fs, partition type 0x83
grub> kernel /home/wli/vmlinuz-pgcl root=/dev/sda2 console=ttyS0,38400n8 debu<00n8 debug grub> kernel /home/wli/vmlinuz-pgcl root=/dev/sda2 console=ttyS0,38400n8 debug
[Linux-bzImage, setup=0xa00, size=0x13e562]
grub> boot
Linux version 2.5.66 (wli@megeira) (gcc version 3.2.3 20030316 (Debian prerelease)) #1 SMP Tue Mar 25 03:36:43 PST 2003
Video mode to be used for restore is ffff
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 0000000000100000 - 00000000c0000000 (usable)
BIOS-e820: 00000000fec00000 - 00000000fec09000 (reserved)
BIOS-e820: 00000000ffe80000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000fff800000 (usable)
user-defined physical RAM map:
user: 0000000000000000 - 000000000009fc00 (usable)
user: 0000000000100000 - 00000000c0000000 (usable)
user: 00000000fec00000 - 00000000fec09000 (reserved)
user: 00000000ffe80000 - 0000000100000000 (reserved)
user: 0000000100000000 - 0000000fff800000 (usable)
Reserving 3072 pages of KVA for lmem_map of node 1
Shrinking node 1 from 4194304 pages to 4191232 pages
Reserving 3072 pages of KVA for lmem_map of node 2
Shrinking node 2 from 6291456 pages to 6288384 pages
Reserving 3072 pages of KVA for lmem_map of node 3
Shrinking node 3 from 8388608 pages to 8385536 pages
Reserving 3072 pages of KVA for lmem_map of node 4
Shrinking node 4 from 10485760 pages to 10482688 pages
Reserving 3072 pages of KVA for lmem_map of node 5
Shrinking node 5 from 12582912 pages to 12579840 pages
Reserving 3072 pages of KVA for lmem_map of node 6
Shrinking node 6 from 14680064 pages to 14676992 pages
Reserving 3072 pages of KVA for lmem_map of node 7
Shrinking node 7 from 16775168 pages to 16772096 pages
Reserving total of 21504 pages for numa KVA remap
MAXMEM = 34200000
64694MB HIGHMEM available.
750MB LOWMEM available.
min_low_pfn = 1106, max_low_pfn = 192000, highstart_pfn = 213504
Low memory ends at vaddr eee00000
node 0 will remap to vaddr f4200000 - f4200000
node 1 will remap to vaddr f3600000 - f4200000
node 2 will remap to vaddr f2a00000 - f3600000
node 3 will remap to vaddr f1e00000 - f2a00000
node 4 will remap to vaddr f1200000 - f1e00000
node 5 will remap to vaddr f0600000 - f1200000
node 6 will remap to vaddr efa00000 - f0600000
node 7 will remap to vaddr eee00000 - efa00000
High memory starts at vaddr f4200000
vmallocspace = [0xf42c8000, 0xfc2ca000)
fixmapspace = [0xfc2cc000, 0xfffff000)
MAXMEM = 0x34200000
found SMP MP-table at 000f6040
hm, page 000f6000 reserved twice.
hm, page 000f7000 reserved twice.
On node 0 totalpages: 262144
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 187904 pages, LIFO batch:2
HighMem zone: 1905152 pages, LIFO batch:2
On node 1 totalpages: 261760
DMA zone: 0 pages, LIFO batch:1
Normal zone: 0 pages, LIFO batch:1
HighMem zone: 2094080 pages, LIFO batch:2
On node 2 totalpages: 261760
DMA zone: 0 pages, LIFO batch:1
Normal zone: 0 pages, LIFO batch:1
HighMem zone: 2094080 pages, LIFO batch:2
On node 3 totalpages: 261760
DMA zone: 0 pages, LIFO batch:1
Normal zone: 0 pages, LIFO batch:1
HighMem zone: 2094080 pages, LIFO batch:2
On node 4 totalpages: 261760
DMA zone: 0 pages, LIFO batch:1
Normal zone: 0 pages, LIFO batch:1
HighMem zone: 2094080 pages, LIFO batch:2
On node 5 totalpages: 261760
DMA zone: 0 pages, LIFO batch:1
Normal zone: 0 pages, LIFO batch:1
HighMem zone: 2094080 pages, LIFO batch:2
On node 6 totalpages: 261760
DMA zone: 0 pages, LIFO batch:1
Normal zone: 0 pages, LIFO batch:1
HighMem zone: 2094080 pages, LIFO batch:2
On node 7 totalpages: 261504
DMA zone: 0 pages, LIFO batch:1
Normal zone: 0 pages, LIFO batch:1
HighMem zone: 2092032 pages, LIFO batch:2
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: IBM NUMA Product ID: SBB <6>Found an OEM MPC table at 7012ec - parsing it ...
Translation: record 0, type 1, quad 0, global 3, local 3
Translation: record 1, type 1, quad 0, global 1, local 1
Translation: record 2, type 1, quad 0, global 1, local 1
Translation: record 3, type 1, quad 0, global 1, local 1
Translation: record 4, type 1, quad 1, global 1, local 3
Translation: record 5, type 1, quad 1, global 1, local 1
Translation: record 6, type 1, quad 1, global 1, local 1
Translation: record 7, type 1, quad 1, global 1, local 1
Translation: record 8, type 1, quad 2, global 1, local 3
Translation: record 9, type 1, quad 2, global 1, local 1
Translation: record 10, type 1, quad 2, global 1, local 1
Translation: record 11, type 1, quad 2, global 1, local 1
Translation: record 12, type 1, quad 3, global 1, local 3
Translation: record 13, type 1, quad 3, global 1, local 1
Translation: record 14, type 1, quad 3, global 1, local 1
Translation: record 15, type 1, quad 3, global 1, local 1
Translation: record 16, type 1, quad 4, global 1, local 3
Translation: record 17, type 1, quad 4, global 1, local 1
Translation: record 18, type 1, quad 4, global 1, local 1
Translation: record 19, type 1, quad 4, global 1, local 1
Translation: record 20, type 1, quad 5, global 1, local 3
Translation: record 21, type 1, quad 5, global 1, local 1
Translation: record 22, type 1, quad 5, global 1, local 1
Translation: record 23, type 1, quad 5, global 1, local 1
Translation: record 24, type 1, quad 6, global 1, local 3
Translation: record 25, type 1, quad 6, global 1, local 1
Translation: record 26, type 1, quad 6, global 1, local 1
Translation: record 27, type 1, quad 6, global 1, local 1
Translation: record 28, type 1, quad 7, global 1, local 3
Translation: record 29, type 1, quad 7, global 1, local 1
Translation: record 30, type 1, quad 7, global 1, local 1
Translation: record 31, type 1, quad 7, global 1, local 1
Translation: record 32, type 3, quad 0, global 0, local 0
Translation: record 33, type 3, quad 0, global 1, local 1
Translation: record 34, type 3, quad 0, global 2, local 2
Translation: record 35, type 4, quad 0, global 20, local 18
Translation: record 36, type 3, quad 1, global 3, local 0
Translation: record 37, type 3, quad 1, global 4, local 1
Translation: record 38, type 4, quad 1, global 21, local 18
Translation: record 39, type 3, quad 2, global 5, local 0
Translation: record 40, type 3, quad 2, global 6, local 1
Translation: record 41, type 3, quad 2, global 7, local 2
Translation: record 42, type 4, quad 2, global 22, local 18
Translation: record 43, type 3, quad 3, global 8, local 0
Translation: record 44, type 3, quad 3, global 9, local 1
Translation: record 45, type 3, quad 3, global 10, local 2
Translation: record 46, type 4, quad 3, global 23, local 18
Translation: record 47, type 3, quad 4, global 11, local 0
Translation: record 48, type 3, quad 4, global 12, local 1
Translation: record 49, type 3, quad 4, global 13, local 2
Translation: record 50, type 4, quad 4, global 24, local 18
Translation: record 51, type 3, quad 5, global 14, local 0
Translation: record 52, type 3, quad 5, global 15, local 1
Translation: record 53, type 4, quad 5, global 25, local 18
Translation: record 54, type 3, quad 6, global 16, local 0
Translation: record 55, type 3, quad 6, global 17, local 1
Translation: record 56, type 4, quad 6, global 26, local 18
Translation: record 57, type 3, quad 7, global 18, local 0
Translation: record 58, type 3, quad 7, global 19, local 1
Translation: record 59, type 4, quad 7, global 27, local 18
Translation: record 60, type 2, quad 0, global 13, local 14
Translation: record 61, type 2, quad 0, global 14, local 13
Translation: record 62, type 2, quad 1, global 15, local 14
Translation: record 63, type 2, quad 1, global 16, local 13
Translation: record 64, type 2, quad 2, global 17, local 14
Translation: record 65, type 2, quad 2, global 18, local 13
Translation: record 66, type 2, quad 3, global 19, local 14
Translation: record 67, type 2, quad 3, global 20, local 13
Translation: record 68, type 2, quad 4, global 21, local 14
Translation: record 69, type 2, quad 4, global 22, local 13
Translation: record 70, type 2, quad 5, global 23, local 14
Translation: record 71, type 2, quad 5, global 24, local 13
Translation: record 72, type 2, quad 6, global 25, local 14
Translation: record 73, type 2, quad 6, global 26, local 13
Translation: record 74, type 2, quad 7, global 27, local 14
Translation: record 75, type 2, quad 7, global 28, local 13
APIC at: 0xFEC08000
Processor #0 6:10 APIC version 17 (quad 0, apic 1)
Processor #4 6:10 APIC version 17 (quad 0, apic 8)
Processor #1 6:10 APIC version 17 (quad 0, apic 2)
Processor #2 6:10 APIC version 17 (quad 0, apic 4)
Processor #0 6:10 APIC version 17 (quad 1, apic 17)
Processor #4 6:10 APIC version 17 (quad 1, apic 24)
Processor #1 6:10 APIC version 17 (quad 1, apic 18)
Processor #2 6:10 APIC version 17 (quad 1, apic 20)
Processor #0 6:10 APIC version 17 (quad 2, apic 33)
Processor #4 6:10 APIC version 17 (quad 2, apic 40)
Processor #1 6:10 APIC version 17 (quad 2, apic 34)
Processor #2 6:10 APIC version 17 (quad 2, apic 36)
Processor #0 6:10 APIC version 17 (quad 3, apic 49)
Processor #4 6:10 APIC version 17 (quad 3, apic 56)
Processor #1 6:10 APIC version 17 (quad 3, apic 50)
Processor #2 6:10 APIC version 17 (quad 3, apic 52)
Processor #0 6:10 APIC version 17 (quad 4, apic 65)
Processor #4 6:10 APIC version 17 (quad 4, apic 72)
Processor #1 6:10 APIC version 17 (quad 4, apic 66)
Processor #2 6:10 APIC version 17 (quad 4, apic 68)
Processor #0 6:10 APIC version 17 (quad 5, apic 81)
Processor #4 6:10 APIC version 17 (quad 5, apic 88)
Processor #1 6:10 APIC version 17 (quad 5, apic 82)
Processor #2 6:10 APIC version 17 (quad 5, apic 84)
Processor #0 6:10 APIC version 17 (quad 6, apic 97)
Processor #4 6:10 APIC version 17 (quad 6, apic 104)
Processor #1 6:10 APIC version 17 (quad 6, apic 98)
Processor #2 6:10 APIC version 17 (quad 6, apic 100)
Processor #0 6:10 APIC version 17 (quad 7, apic 113)
Processor #4 6:10 APIC version 17 (quad 7, apic 120)
Processor #1 6:10 APIC version 17 (quad 7, apic 114)
Processor #2 6:10 APIC version 17 (quad 7, apic 116)
Bus #0 is PCI (node 0)
Bus #1 is PCI (node 0)
Bus #2 is PCI (node 0)
Bus #20 is EISA (node 0)
Bus #3 is PCI (node 1)
Bus #4 is PCI (node 1)
Bus #21 is EISA (node 1)
Bus #5 is PCI (node 2)
Bus #6 is PCI (node 2)
Bus #7 is PCI (node 2)
Bus #22 is EISA (node 2)
Bus #8 is PCI (node 3)
Bus #9 is PCI (node 3)
Bus #10 is PCI (node 3)
Bus #23 is EISA (node 3)
Bus #11 is PCI (node 4)
Bus #12 is PCI (node 4)
Bus #13 is PCI (node 4)
Bus #24 is EISA (node 4)
Bus #14 is PCI (node 5)
Bus #15 is PCI (node 5)
Bus #25 is EISA (node 5)
Bus #16 is PCI (node 6)
Bus #17 is PCI (node 6)
Bus #26 is EISA (node 6)
Bus #18 is PCI (node 7)
Bus #19 is PCI (node 7)
Bus #27 is EISA (node 7)
I/O APIC #13 Version 17 at 0xFE800000.
I/O APIC #14 Version 17 at 0xFE801000.
I/O APIC #15 Version 17 at 0xFE840000.
I/O APIC #16 Version 17 at 0xFE841000.
I/O APIC #17 Version 17 at 0xFE880000.
I/O APIC #18 Version 17 at 0xFE881000.
I/O APIC #19 Version 17 at 0xFE8C0000.
I/O APIC #20 Version 17 at 0xFE8C1000.
I/O APIC #21 Version 17 at 0xFE900000.
I/O APIC #22 Version 17 at 0xFE901000.
I/O APIC #23 Version 17 at 0xFE940000.
I/O APIC #24 Version 17 at 0xFE941000.
I/O APIC #25 Version 17 at 0xFE980000.
I/O APIC #26 Version 17 at 0xFE981000.
I/O APIC #27 Version 17 at 0xFE9C0000.
I/O APIC #28 Version 17 at 0xFE9C1000.
Enabling APIC mode: NUMA-Q. Using 2 I/O APICs
Processors: 32
Building zonelist for node : 0
Building zonelist for node : 1
Building zonelist for node : 2
Building zonelist for node : 3
Building zonelist for node : 4
Building zonelist for node : 5
Building zonelist for node : 6
Building zonelist for node : 7
Kernel command line: root=/dev/sda2 console=ttyS0,38400n8 debug mem=67100672K
__set_fixmap(2,fec08000)
__set_fixmap(3,fe800000)
__set_fixmap(4,fe801000)
Initializing CPU#0
PID hash table entries: 4096 (order 12: 32768 bytes)
Detected 700.360 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1380.35 BogoMIPS
bootmem: freed 5bc3 pages in node 0
Initializing highpages for node 0
Initializing highpages for node 1
Initializing highpages for node 2
Initializing highpages for node 3
Initializing highpages for node 4
Initializing highpages for node 5
Initializing highpages for node 6
Initializing highpages for node 7
Memory: 65946144k/67100672k available (1956k kernel code, 15936k reserved, 667k data, 300k init, 65198080k highmem)
MAXMEM=0x34200000
vmalloc: start = 0xf42c8000, end = 0xfc2ca000
fixaddr: start = 0xfc2cc000, end = 0xfffff000
Dentry cache hash table entries: 1048576 (order: 7, 4194304 bytes)
Inode-cache hash table entries: 1048576 (order: 7, 4194304 bytes)
Mount-cache hash table entries: 4096 (order: 0, 32768 bytes)
-> /dev
-> /dev/console
-> /root
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU serial number disabled.
CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
CPU0: Intel Pentium III (Cascades) stepping 04
per-CPU timeslice cutoff: 5846.34 usecs.
task migration cache decay timeout: 6 msecs.
enabled ExtINT on CPU#0
Leaving ESR disabled.
Mapping cpu 0 to node 0
Remapping cross-quad port I/O for 8 quads
vmalloc, returning [0xf42c8000, 0xf44c9000)
xquad_portio vaddr 0xf42c8000, len 00200000
Booting processor 1/2 eip 2000
Storing NMI vector
Initializing CPU#1
masked ExtINT on CPU#1
Leaving ESR disabled.
Mapping cpu 1 to node 0
Calibrating delay loop... 1396.73 BogoMIPS
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU serial number disabled.
CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
CPU1: Intel Pentium III (Cascades) stepping 04
Booting processor 2/4 eip 2000
Storing NMI vector
Initializing CPU#2
masked ExtINT on CPU#2
Leaving ESR disabled.
Mapping cpu 2 to node 0
Calibrating delay loop... 1396.73 BogoMIPS
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU serial number disabled.
CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
CPU2: Intel Pentium III (Cascades) stepping 00
Booting processor 3/8 eip 2000
Storing NMI vector
Initializing CPU#3
masked ExtINT on CPU#3
Leaving ESR disabled.
Mapping cpu 3 to node 0
Calibrating delay loop... 1396.73 BogoMIPS
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU serial number disabled.
CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
CPU3: Intel Pentium III (Cascades) stepping 04
Booting processor 4/17 eip 2000
Storing NMI vector
Initializing CPU#4
masked ExtINT on CPU#4
Leaving ESR disabled.
Mapping cpu 4 to node 1
Calibrating delay loop... 1388.54 BogoMIPS
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU serial number disabled.
CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
CPU4: Intel Pentium III (Cascades) stepping 01
Booting processor 5/18 eip 2000
Storing NMI vector
Initializing CPU#5
masked ExtINT on CPU#5
Leaving ESR disabled.
Mapping cpu 5 to node 1
Calibrating delay loop... 1384.44 BogoMIPS
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU serial number disabled.
CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
CPU5: Intel Pentium III (Cascades) stepping 01
Booting processor 6/20 eip 2000
Storing NMI vector
Initializing CPU#6
masked ExtINT on CPU#6
Leaving ESR disabled.
Mapping cpu 6 to node 1
Calibrating delay loop... 1392.64 BogoMIPS
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU serial number disabled.
CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
CPU6: Intel Pentium III (Cascades) stepping 01
Booting processor 7/24 eip 2000
Storing NMI vector
Initializing CPU#7
masked ExtINT on CPU#7
Leaving ESR disabled.
Mapping cpu 7 to node 1
Calibrating delay loop... 1388.54 BogoMIPS
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU serial number disabled.
CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
CPU7: Intel Pentium III (Cascades) stepping 01
Booting processor 8/33 eip 2000
Storing NMI vector
Initializing CPU#8
masked ExtINT on CPU#8
Leaving ESR disabled.
Mapping cpu 8 to node 2
Calibrating delay loop... 1392.64 BogoMIPS
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU serial number disabled.
CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
CPU8: Intel Pentium III (Cascades) stepping 04
Booting processor 9/34 eip 2000
Storing NMI vector
Initializing CPU#9
masked ExtINT on CPU#9
Leaving ESR disabled.
Mapping cpu 9 to node 2
Calibrating delay loop... 1392.64 BogoMIPS
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU serial number disabled.
CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
CPU9: Intel Pentium III (Cascades) stepping 04
Booting processor 10/36 eip 2000
Storing NMI vector
Initializing CPU#10
masked ExtINT on CPU#10
Leaving ESR disabled.
Mapping cpu 10 to node 2
Calibrating delay loop... 1384.44 BogoMIPS
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU serial number disabled.
CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
CPU10: Intel Pentium III (Cascades) stepping 04
Booting processor 11/40 eip 2000
Storing NMI vector
Initializing CPU#11
masked ExtINT on CPU#11
Leaving ESR disabled.
Mapping cpu 11 to node 2
Calibrating delay loop... 1384.44 BogoMIPS
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU serial number disabled.
CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
CPU11: Intel Pentium III (Cascades) stepping 04
Booting processor 12/49 eip 2000
Storing NMI vector
Initializing CPU#12
masked ExtINT on CPU#12
Leaving ESR disabled.
Mapping cpu 12 to node 3
Calibrating delay loop... 1384.44 BogoMIPS
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU serial number disabled.
CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
CPU12: Intel Pentium III (Cascades) stepping 00
Booting processor 13/50 eip 2000
Storing NMI vector
Initializing CPU#13
masked ExtINT on CPU#13
Leaving ESR disabled.
Mapping cpu 13 to node 3
Calibrating delay loop... 1384.44 BogoMIPS
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU serial number disabled.
CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
CPU13: Intel Pentium III (Cascades) stepping 04
Booting processor 14/52 eip 2000
Storing NMI vector
Initializing CPU#14
masked ExtINT on CPU#14
Leaving ESR disabled.
Mapping cpu 14 to node 3
Calibrating delay loop... 1384.44 BogoMIPS
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU serial number disabled.
CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
CPU14: Intel Pentium III (Cascades) stepping 00
Booting processor 15/56 eip 2000
Storing NMI vector
Initializing CPU#15
masked ExtINT on CPU#15
Leaving ESR disabled.
Mapping cpu 15 to node 3
Calibrating delay loop... 1384.44 BogoMIPS
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU serial number disabled.
CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
CPU15: Intel Pentium III (Cascades) stepping 00
Booting processor 16/65 eip 2000
Storing NMI vector
Initializing CPU#16
masked ExtINT on CPU#16
Leaving ESR disabled.
Mapping cpu 16 to node 4
Calibrating delay loop... 1384.44 BogoMIPS
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU serial number disabled.
CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
CPU16: Intel Pentium III (Cascades) stepping 00
Booting processor 17/66 eip 2000
Storing NMI vector
Initializing CPU#17
masked ExtINT on CPU#17
Leaving ESR disabled.
Mapping cpu 17 to node 4
Calibrating delay loop... 1384.44 BogoMIPS
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU serial number disabled.
CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
CPU17: Intel Pentium III (Cascades) stepping 00
Booting processor 18/68 eip 2000
Storing NMI vector
Initializing CPU#18
masked ExtINT on CPU#18
Leaving ESR disabled.
Mapping cpu 18 to node 4
Calibrating delay loop... 1384.44 BogoMIPS
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU serial number disabled.
CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
CPU18: Intel Pentium III (Cascades) stepping 00
Booting processor 19/72 eip 2000
Storing NMI vector
Initializing CPU#19
masked ExtINT on CPU#19
Leaving ESR disabled.
Mapping cpu 19 to node 4
Calibrating delay loop... 1384.44 BogoMIPS
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU serial number disabled.
CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
CPU19: Intel Pentium III (Cascades) stepping 00
Booting processor 20/81 eip 2000
Storing NMI vector
Initializing CPU#20
masked ExtINT on CPU#20
Leaving ESR disabled.
Mapping cpu 20 to node 5
Calibrating delay loop... 1384.44 BogoMIPS
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU serial number disabled.
CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
CPU20: Intel Pentium III (Cascades) stepping 00
Booting processor 21/82 eip 2000
Storing NMI vector
Initializing CPU#21
masked ExtINT on CPU#21
Leaving ESR disabled.
Mapping cpu 21 to node 5
Calibrating delay loop... 1384.44 BogoMIPS
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU serial number disabled.
CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
CPU21: Intel Pentium III (Cascades) stepping 00
Booting processor 22/84 eip 2000
Storing NMI vector
Initializing CPU#22
masked ExtINT on CPU#22
Leaving ESR disabled.
Mapping cpu 22 to node 5
Calibrating delay loop... 1384.44 BogoMIPS
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU serial number disabled.
CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
CPU22: Intel Pentium III (Cascades) stepping 00
Booting processor 23/88 eip 2000
Storing NMI vector
Initializing CPU#23
masked ExtINT on CPU#23
Leaving ESR disabled.
Mapping cpu 23 to node 5
Calibrating delay loop... 1384.44 BogoMIPS
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU serial number disabled.
CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
CPU23: Intel Pentium III (Cascades) stepping 00
Booting processor 24/97 eip 2000
Storing NMI vector
Initializing CPU#24
masked ExtINT on CPU#24
Leaving ESR disabled.
Mapping cpu 24 to node 6
Calibrating delay loop... 1384.44 BogoMIPS
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU serial number disabled.
CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
CPU24: Intel Pentium III (Cascades) stepping 00
Booting processor 25/98 eip 2000
Storing NMI vector
Initializing CPU#25
masked ExtINT on CPU#25
Leaving ESR disabled.
Mapping cpu 25 to node 6
Calibrating delay loop... 1384.44 BogoMIPS
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU serial number disabled.
CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
CPU25: Intel Pentium III (Cascades) stepping 00
Booting processor 26/100 eip 2000
Storing NMI vector
Initializing CPU#26
masked ExtINT on CPU#26
Leaving ESR disabled.
Mapping cpu 26 to node 6
Calibrating delay loop... 1388.54 BogoMIPS
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU serial number disabled.
CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
CPU26: Intel Pentium III (Cascades) stepping 00
Booting processor 27/104 eip 2000
Storing NMI vector
Initializing CPU#27
masked ExtINT on CPU#27
Leaving ESR disabled.
Mapping cpu 27 to node 6
Calibrating delay loop... 1384.44 BogoMIPS
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU serial number disabled.
CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
CPU27: Intel Pentium III (Cascades) stepping 00
Booting processor 28/113 eip 2000
Storing NMI vector
Initializing CPU#28
masked ExtINT on CPU#28
Leaving ESR disabled.
Mapping cpu 28 to node 7
Calibrating delay loop... 1384.44 BogoMIPS
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU serial number disabled.
CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
CPU28: Intel Pentium III (Cascades) stepping 01
Booting processor 29/114 eip 2000
Storing NMI vector
Initializing CPU#29
masked ExtINT on CPU#29
Leaving ESR disabled.
Mapping cpu 29 to node 7
Calibrating delay loop... 1384.44 BogoMIPS
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU serial number disabled.
CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
CPU29: Intel Pentium III (Cascades) stepping 00
Booting processor 30/116 eip 2000
Storing NMI vector
Initializing CPU#30
masked ExtINT on CPU#30
Leaving ESR disabled.
Mapping cpu 30 to node 7
Calibrating delay loop... 1384.44 BogoMIPS
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU serial number disabled.
CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
CPU30: Intel Pentium III (Cascades) stepping 00
Booting processor 31/120 eip 2000
Storing NMI vector
Initializing CPU#31
masked ExtINT on CPU#31
Leaving ESR disabled.
Mapping cpu 31 to node 7
Calibrating delay loop... 1384.44 BogoMIPS
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU serial number disabled.
CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
CPU31: Intel Pentium III (Cascades) stepping 01
Total of 32 processors activated (44371.96 BogoMIPS).
ENABLING IO-APIC IRQs
init IO_APIC IRQs
IO-APIC (apicid-pin) 13-0, 14-0, 14-8, 14-18, 14-19, 14-20, 14-21, 14-22, 14-23 not connected.
..TIMER: vector=0x31 pin1=2 pin2=0
..MP-BIOS bug: 8254 timer not connected to IO-APIC
...trying to set up timer (IRQ0) through the 8259A ...
..... (found pin 0) ... failed.
...trying to set up timer as Virtual Wire IRQ... works.
number of MP IRQ sources: 320.
number of IO-APIC #13 registers: 24.
number of IO-APIC #14 registers: 24.
testing the IO APIC.......................
IO APIC #13......
.... register #00: 0E000000
....... : physical APIC id: 0E
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 00170011
....... : max redirection entries: 0017
....... : PRQ implemented: 0
....... : IO APIC version: 0011
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 00F 0F 0 0 0 0 0 0 1 39
02 000 00 1 0 0 0 0 0 0 00
03 00F 0F 0 0 0 0 0 0 1 41
04 00F 0F 0 0 0 0 0 0 1 49
05 00F 0F 0 0 0 0 0 0 1 51
06 00F 0F 0 0 0 0 0 0 1 59
07 00F 0F 1 1 0 1 0 0 1 61
08 00F 0F 1 1 0 0 0 0 1 69
09 00F 0F 0 0 0 0 0 0 1 71
0a 00F 0F 0 0 0 0 0 0 1 79
0b 00F 0F 1 1 0 1 0 0 1 81
0c 00F 0F 0 0 0 0 0 0 1 89
0d 00F 0F 1 1 0 1 0 0 1 91
0e 00F 0F 0 0 0 0 0 0 1 99
0f 00F 0F 1 1 0 1 0 0 1 A1
10 00F 0F 1 1 0 1 0 0 1 A9
11 00F 0F 1 1 0 1 0 0 1 B1
12 00F 0F 1 1 0 1 0 0 1 B9
13 00F 0F 1 1 0 1 0 0 1 C1
14 00F 0F 1 1 0 1 0 0 1 C9
15 00F 0F 1 1 0 1 0 0 1 D1
16 00F 0F 1 1 0 1 0 0 1 D9
17 00F 0F 1 1 0 1 0 0 1 E1
IO APIC #14......
.... register #00: 0D000000
....... : physical APIC id: 0D
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 00170011
....... : max redirection entries: 0017
....... : PRQ implemented: 0
....... : IO APIC version: 0011
.... register #02: 0E000000
....... : arbitration: 0E
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 00F 0F 1 1 0 1 0 0 1 E9
02 00F 0F 1 1 0 1 0 0 1 32
03 00F 0F 1 1 0 1 0 0 1 3A
04 00F 0F 1 1 0 1 0 0 1 42
05 00F 0F 1 1 0 1 0 0 1 4A
06 00F 0F 1 1 0 1 0 0 1 52
07 00F 0F 1 1 0 1 0 0 1 5A
08 000 00 1 0 0 0 0 0 0 00
09 00F 0F 1 1 0 1 0 0 1 62
0a 00F 0F 1 1 0 1 0 0 1 6A
0b 00F 0F 1 1 0 1 0 0 1 72
0c 00F 0F 1 1 0 1 0 0 1 7A
0d 00F 0F 1 1 0 1 0 0 1 82
0e 00F 0F 1 1 0 1 0 0 1 8A
0f 00F 0F 1 1 0 1 0 0 1 92
10 00F 0F 1 1 0 1 0 0 1 9A
11 00F 0F 1 1 0 1 0 0 1 A2
12 000 00 1 0 0 0 0 0 0 00
13 000 00 1 0 0 0 0 0 0 00
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ17 -> 0:17
IRQ18 -> 0:18
IRQ19 -> 0:19
IRQ20 -> 0:20
IRQ21 -> 0:21
IRQ22 -> 0:22
IRQ23 -> 0:23
IRQ25 -> 1:1
IRQ26 -> 1:2
IRQ27 -> 1:3
IRQ28 -> 1:4
IRQ29 -> 1:5
IRQ30 -> 1:6
IRQ31 -> 1:7
IRQ33 -> 1:9
IRQ34 -> 1:10
IRQ35 -> 1:11
IRQ36 -> 1:12
IRQ37 -> 1:13
IRQ38 -> 1:14
IRQ39 -> 1:15
IRQ40 -> 1:16
IRQ41 -> 1:17
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 699.0913 MHz.
..... host bus clock speed is 99.0987 MHz.
checking TSC synchronization across 32 CPUs:
BIOS BUG: CPU#0 improperly initialized, has -49265 usecs TSC skew! FIXED.
BIOS BUG: CPU#1 improperly initialized, has -49265 usecs TSC skew! FIXED.
BIOS BUG: CPU#2 improperly initialized, has -49265 usecs TSC skew! FIXED.
BIOS BUG: CPU#3 improperly initialized, has -49264 usecs TSC skew! FIXED.
BIOS BUG: CPU#4 improperly initialized, has -32051 usecs TSC skew! FIXED.
BIOS BUG: CPU#5 improperly initialized, has -32051 usecs TSC skew! FIXED.
BIOS BUG: CPU#6 improperly initialized, has -32050 usecs TSC skew! FIXED.
BIOS BUG: CPU#7 improperly initialized, has -32051 usecs TSC skew! FIXED.
BIOS BUG: CPU#8 improperly initialized, has 105926 usecs TSC skew! FIXED.
BIOS BUG: CPU#9 improperly initialized, has 105926 usecs TSC skew! FIXED.
BIOS BUG: CPU#10 improperly initialized, has 105926 usecs TSC skew! FIXED.
BIOS BUG: CPU#11 improperly initialized, has 105926 usecs TSC skew! FIXED.
BIOS BUG: CPU#12 improperly initialized, has 5134 usecs TSC skew! FIXED.
BIOS BUG: CPU#13 improperly initialized, has 5134 usecs TSC skew! FIXED.
BIOS BUG: CPU#14 improperly initialized, has 5134 usecs TSC skew! FIXED.
BIOS BUG: CPU#15 improperly initialized, has 5134 usecs TSC skew! FIXED.
BIOS BUG: CPU#16 improperly initialized, has -25091 usecs TSC skew! FIXED.
BIOS BUG: CPU#17 improperly initialized, has -25091 usecs TSC skew! FIXED.
BIOS BUG: CPU#18 improperly initialized, has -25091 usecs TSC skew! FIXED.
BIOS BUG: CPU#19 improperly initialized, has -25091 usecs TSC skew! FIXED.
BIOS BUG: CPU#20 improperly initialized, has -5976 usecs TSC skew! FIXED.
BIOS BUG: CPU#21 improperly initialized, has -5977 usecs TSC skew! FIXED.
BIOS BUG: CPU#22 improperly initialized, has -5976 usecs TSC skew! FIXED.
BIOS BUG: CPU#23 improperly initialized, has -5976 usecs TSC skew! FIXED.
BIOS BUG: CPU#24 improperly initialized, has -45788 usecs TSC skew! FIXED.
BIOS BUG: CPU#25 improperly initialized, has -45788 usecs TSC skew! FIXED.
BIOS BUG: CPU#26 improperly initialized, has -45788 usecs TSC skew! FIXED.
BIOS BUG: CPU#27 improperly initialized, has -45788 usecs TSC skew! FIXED.
BIOS BUG: CPU#28 improperly initialized, has 47112 usecs TSC skew! FIXED.
BIOS BUG: CPU#29 improperly initialized, has 47111 usecs TSC skew! FIXED.
BIOS BUG: CPU#30 improperly initialized, has 47112 usecs TSC skew! FIXED.
BIOS BUG: CPU#31 improperly initialized, has 47112 usecs TSC skew! FIXED.
Starting migration thread for cpu 0
Bringing up 1
CPU 1 IS NOW UP!
Starting migration thread for cpu 1
Bringing up 2
CPU 2 IS NOW UP!
Starting migration thread for cpu 2
Bringing up 3
CPU 3 IS NOW UP!
Starting migration thread for cpu 3
Bringing up 4
CPU 4 IS NOW UP!
Starting migration thread for cpu 4
Bringing up 5
CPU 5 IS NOW UP!
Starting migration thread for cpu 5
Bringing up 6
CPU 6 IS NOW UP!
Starting migration thread for cpu 6
Bringing up 7
CPU 7 IS NOW UP!
Starting migration thread for cpu 7
Bringing up 8
CPU 8 IS NOW UP!
Starting migration thread for cpu 8
Bringing up 9
CPU 9 IS NOW UP!
Starting migration thread for cpu 9
Bringing up 10
CPU 10 IS NOW UP!
Starting migration thread for cpu 10
Bringing up 11
CPU 11 IS NOW UP!
Starting migration thread for cpu 11
Bringing up 12
CPU 12 IS NOW UP!
Starting migration thread for cpu 12
Bringing up 13
CPU 13 IS NOW UP!
Starting migration thread for cpu 13
Bringing up 14
CPU 14 IS NOW UP!
Starting migration thread for cpu 14
Bringing up 15
CPU 15 IS NOW UP!
Starting migration thread for cpu 15
Bringing up 16
CPU 16 IS NOW UP!
Starting migration thread for cpu 16
Bringing up 17
CPU 17 IS NOW UP!
Starting migration thread for cpu 17
Bringing up 18
CPU 18 IS NOW UP!
Starting migration thread for cpu 18
Bringing up 19
CPU 19 IS NOW UP!
Starting migration thread for cpu 19
Bringing up 20
CPU 20 IS NOW UP!
Starting migration thread for cpu 20
Bringing up 21
CPU 21 IS NOW UP!
Starting migration thread for cpu 21
Bringing up 22
CPU 22 IS NOW UP!
Starting migration thread for cpu 22
Bringing up 23
CPU 23 IS NOW UP!
Starting migration thread for cpu 23
Bringing up 24
CPU 24 IS NOW UP!
Starting migration thread for cpu 24
Bringing up 25
CPU 25 IS NOW UP!
Starting migration thread for cpu 25
Bringing up 26
CPU 26 IS NOW UP!
Starting migration thread for cpu 26
Bringing up 27
CPU 27 IS NOW UP!
Starting migration thread for cpu 27
Bringing up 28
CPU 28 IS NOW UP!
Starting migration thread for cpu 28
Bringing up 29
CPU 29 IS NOW UP!
Starting migration thread for cpu 29
Bringing up 30
CPU 30 IS NOW UP!
Starting migration thread for cpu 30
Bringing up 31
CPU 31 IS NOW UP!
Starting migration thread for cpu 31
CPUS done 32
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
about to call initcall 0xc03987b0
mtrr: v2.0 (20020519)
about to call initcall 0xc03a4f40
about to call initcall 0xc03a5280
about to call initcall 0xc03a6e70
about to call initcall 0xc03a6f10
about to call initcall 0xc0398920
about to call initcall 0xc03abd10
PCI: Using configuration type 1
about to call initcall 0xc039e9c0
about to call initcall 0xc03a1ad0
BIO: pool of 256 setup, 15Kb (60 bytes/bio)
biovec pool[0]: 1 bvecs: 256 entries (12 bytes)
biovec pool[1]: 4 bvecs: 256 entries (48 bytes)
biovec pool[2]: 16 bvecs: 256 entries (192 bytes)
biovec pool[3]: 64 bvecs: 256 entries (768 bytes)
biovec pool[4]: 128 bvecs: 256 entries (1536 bytes)
biovec pool[5]: 256 bvecs: 256 entries (3072 bytes)
about to call initcall 0xc03a70e0
block request queues:
128 requests per read queue
128 requests per write queue
8 requests per batch
enter congestion at 15
exit congestion at 17
about to call initcall 0xc03a7160
about to call initcall 0xc03aaef0
SCSI subsystem initialized
about to call initcall 0xc03ac0a0
PCI: Probing PCI hardware (bus 00)
PCI: Searching for i450NX host bridges on 00:10.0
about to call initcall 0xc03ac4f0
PCI->APIC IRQ transform: (B2,I12,P0) -> 40
PCI->APIC IRQ transform: (B2,I13,P0) -> 36
PCI->APIC IRQ transform: (B2,I15,P0) -> 28
PCI->APIC IRQ transform: (B0,I10,P0) -> 23
PCI->APIC IRQ transform: (B0,I11,P0) -> 19
PCI: using PPB(B0,I12,P0) to get irq 15
PCI->APIC IRQ transform: (B1,I4,P0) -> 15
PCI: using PPB(B0,I12,P1) to get irq 13
PCI->APIC IRQ transform: (B1,I5,P1) -> 13
PCI: using PPB(B0,I12,P2) to get irq 11
PCI->APIC IRQ transform: (B1,I6,P2) -> 11
PCI: using PPB(B0,I12,P3) to get irq 7
PCI->APIC IRQ transform: (B1,I7,P3) -> 7
about to call initcall 0xc03ac720
about to call initcall 0xc03ace50
about to call initcall 0xc03940e0
about to call initcall 0xc0394180
about to call initcall 0xc01112d0
about to call initcall 0xc0396220
about to call initcall 0xc039c140
about to call initcall 0xc039d3e0
__set_fixmap(1,2e1c0000)
Enabling SEP on CPU 1
Enabling SEP on CPU 2
Enabling SEP on CPU 5
Enabling SEP on CPU 3
Enabling SEP on CPU 26
Enabling SEP on CPU 25
Enabling SEP on CPU 24
Enabling SEP on CPU 27
Enabling SEP on CPU 6
Enabling SEP on CPU 9
Enabling SEP on CPU 7
Enabling SEP on CPU 4
Enabling SEP on CPU 30
Enabling SEP on CPU 12
Enabling SEP on CPU 11
Enabling SEP on CPU 17
Enabling SEP on CPU 18
Enabling SEP on CPU 19
Enabling SEP on CPU 16
Enabling SEP on CPU 15
Enabling SEP on CPU 13
Enabling SEP on CPU 14
Enabling SEP on CPU 29
Enabling SEP on CPU 10
Enabling SEP on CPU 28
Enabling SEP on CPU 8
Enabling SEP on CPU 20
Enabling SEP on CPU 21
Enabling SEP on CPU 22
Enabling SEP on CPU 23
Enabling SEP on CPU 31
Enabling SEP on CPU 0
about to call initcall 0xc039e830
Total HugeTLB memory allocated, 0
about to call initcall 0xc039f190
about to call initcall 0xc039f520
about to call initcall 0xc039f7c0
about to call initcall 0xc039f8c0
about to call initcall 0xc039fb90
about to call initcall 0xc039fc70
about to call initcall 0xc039fe00
about to call initcall 0xc03a0eb0
about to call initcall 0xc03a13f0
about to call initcall 0xc03a1520
about to call initcall 0xc03a1550
about to call initcall 0xc03a15b0
highmem bounce pool size: 64 pages
about to call initcall 0xc03a1730
about to call initcall 0xc03a17e0
about to call initcall 0xc03a1c30
about to call initcall 0xc03a1c80
about to call initcall 0xc03a1ce0
about to call initcall 0xc03a20e0
about to call initcall 0xc03a2400
about to call initcall 0xc03a24b0
about to call initcall 0xc03a25e0
about to call initcall 0xc03a2600
about to call initcall 0xc03a2650
about to call initcall 0xc03a2670
about to call initcall 0xc03a2b50
about to call initcall 0xc03a2ba0
about to call initcall 0xc03a2be0
about to call initcall 0xc03a2c20
about to call initcall 0xc03a2c60
about to call initcall 0xc03a2ca0
about to call initcall 0xc03a2ce0
about to call initcall 0xc03a2d70
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
about to call initcall 0xc03a2e50
about to call initcall 0xc03a2e70
vmalloc, returning [0xf44c9000, 0xf44d6000)
vmalloc, returning [0xf44d6000, 0xf451b000)
about to call initcall 0xc03a3fc0
about to call initcall 0xc03a4f60
about to call initcall 0xc03a51e0
pty: 256 Unix98 ptys configured
about to call initcall 0xc03a6570
Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
about to call initcall 0xc03a6bb0
about to call initcall 0xc0221800
about to call initcall 0xc03a7b30
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
about to call initcall 0xc03a8100
loop: loaded (max 8 devices)
about to call initcall 0xc03a8ad0
starfire.c:v1.03 7/26/2000 Written by Donald Becker <becker@scyld.com>
(unofficial 2.2/2.4 kernel port, version 1.03+LK1.4.1, February 10, 2002)
vmalloc, returning [0xf451b000, 0xf459c000)
eth0: Adaptec Starfire 6915 at 0xf451b000, 00:00:d1:ec:cf:9d, IRQ 15.
eth0: MII PHY found at address 1, status 0x7809 advertising 0x01e1.
eth0: scatter-gather and hardware TCP cksumming disabled.
vmalloc, returning [0xf459c000, 0xf461d000)
eth1: Adaptec Starfire 6915 at 0xf459c000, 00:00:d1:ec:cf:9e, IRQ 13.
eth1: MII PHY found at address 1, status 0x7809 advertising 0x01e1.
eth1: scatter-gather and hardware TCP cksumming disabled.
vmalloc, returning [0xf461d000, 0xf469e000)
eth2: Adaptec Starfire 6915 at 0xf461d000, 00:00:d1:ec:cf:9f, IRQ 11.
eth2: MII PHY found at address 1, status 0x7809 advertising 0x01e1.
eth2: scatter-gather and hardware TCP cksumming disabled.
vmalloc, returning [0xf469e000, 0xf471f000)
eth3: Adaptec Starfire 6915 at 0xf469e000, 00:00:d1:ec:cf:a0, IRQ 7.
eth3: MII PHY found at address 1, status 0x7809 advertising 0x01e1.
eth3: scatter-gather and hardware TCP cksumming disabled.
about to call initcall 0xc03a97b0
about to call initcall 0xc03aadc0
about to call initcall 0xc03ab1e0
vmalloc, returning [0xf471f000, 0xf4728000)
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.28
<Adaptec 2944 Ultra SCSI adapter>
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
(scsi0:A:0): 20.000MB/s transfers (10.000MHz, offset 8, 16bit)
Vendor: IBM Model: DGHS18X Rev: 0360
Type: Direct-Access ANSI SCSI revision: 03
scsi0:A:0:0: Tagged Queuing enabled. Depth 253
(scsi0:A:1): 20.000MB/s transfers (10.000MHz, offset 8, 16bit)
Vendor: IBM OEM Model: DCHS09X Rev: 5454
Type: Direct-Access ANSI SCSI revision: 02
scsi0:A:1:0: Tagged Queuing enabled. Depth 253
(scsi0:A:2): 20.000MB/s transfers (10.000MHz, offset 8, 16bit)
Vendor: IBM Model: DGHS18X Rev: 0360
Type: Direct-Access ANSI SCSI revision: 03
scsi0:A:2:0: Tagged Queuing enabled. Depth 253
(scsi0:A:3): 20.000MB/s transfers (10.000MHz, offset 8, 16bit)
Vendor: IBM Model: DGHS18X Rev: 0360
Type: Direct-Access ANSI SCSI revision: 03
scsi0:A:3:0: Tagged Queuing enabled. Depth 253
(scsi0:A:4): 20.000MB/s transfers (10.000MHz, offset 8, 16bit)
Vendor: IBM OEM Model: DCHS09X Rev: 5454
Type: Direct-Access ANSI SCSI revision: 02
scsi0:A:4:0: Tagged Queuing enabled. Depth 253
(scsi0:A:5): 20.000MB/s transfers (10.000MHz, offset 8, 16bit)
Vendor: IBM Model: DGHS18X Rev: 0360
Type: Direct-Access ANSI SCSI revision: 03
scsi0:A:5:0: Tagged Queuing enabled. Depth 253
(scsi0:A:8): 20.000MB/s transfers (10.000MHz, offset 8, 16bit)
Vendor: IBM Model: DGHS18X Rev: 0360
Type: Direct-Access ANSI SCSI revision: 03
scsi0:A:8:0: Tagged Queuing enabled. Depth 253
(scsi0:A:9): 20.000MB/s transfers (10.000MHz, offset 8, 16bit)
Vendor: IBM Model: DGHS18X Rev: 0360
Type: Direct-Access ANSI SCSI revision: 03
scsi0:A:9:0: Tagged Queuing enabled. Depth 253
(scsi0:A:10): 20.000MB/s transfers (10.000MHz, offset 8, 16bit)
Vendor: IBM Model: DGHS18X Rev: 0360
Type: Direct-Access ANSI SCSI revision: 03
scsi0:A:10:0: Tagged Queuing enabled. Depth 253
about to call initcall 0xc03ab210
ERROR: SCSI host `isp1020' has no error handling
ERROR: This is not a safe way to run your SCSI host
ERROR: The error handling must be added to this driver
Call Trace:
[<c0241121>] scsi_register+0x3a1/0x3b0
[<c0277478>] pcibios_enable_device+0x28/0x30
[<c026d7b4>] isp1020_detect+0x84/0x2e0
[<c0241152>] scsi_register_host+0x22/0xc0
[<c010511c>] init+0x7c/0x200
[<c01050a0>] init+0x0/0x200
[<c01074d5>] kernel_thread_helper+0x5/0x10
vmalloc, returning [0xf4728000, 0xf4731000)
qlogicisp : new isp1020 revision ID (3)
ERROR: SCSI host `isp1020' has no error handling
ERROR: This is not a safe way to run your SCSI host
ERROR: The error handling must be added to this driver
Call Trace:
[<c0241121>] scsi_register+0x3a1/0x3b0
[<c0277478>] pcibios_enable_device+0x28/0x30
[<c026d7b4>] isp1020_detect+0x84/0x2e0
[<c0241152>] scsi_register_host+0x22/0xc0
[<c010511c>] init+0x7c/0x200
[<c01050a0>] init+0x0/0x200
[<c01074d5>] kernel_thread_helper+0x5/0x10
vmalloc, returning [0xf4731000, 0xf473a000)
qlogicisp : new isp1020 revision ID (5)
scsi1 : QLogic ISP1020 SCSI on PCI bus 02 device 68 irq 36 MEM base 0xf472a000
scsi2 : QLogic ISP1020 SCSI on PCI bus 02 device 78 irq 28 MEM base 0xf4734000
about to call initcall 0xc03ab250
SCSI device sda: 35843670 512-byte hdwr sectors (18352 MB)
SCSI device sda: drive cache: write through
sda: sda1 sda2
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sdb: 17796077 512-byte hdwr sectors (9112 MB)
SCSI device sdb: drive cache: write through
sdb: sdb1 sdb2
Attached scsi disk sdb at scsi0, channel 0, id 1, lun 0
SCSI device sdc: 35843670 512-byte hdwr sectors (18352 MB)
SCSI device sdc: drive cache: write through
sdc: unknown partition table
Attached scsi disk sdc at scsi0, channel 0, id 2, lun 0
SCSI device sdd: 35843670 512-byte hdwr sectors (18352 MB)
SCSI device sdd: drive cache: write through
sdd: unknown partition table
Attached scsi disk sdd at scsi0, channel 0, id 3, lun 0
SCSI device sde: 17796077 512-byte hdwr sectors (9112 MB)
SCSI device sde: drive cache: write through
sde: sde1 < >
Attached scsi disk sde at scsi0, channel 0, id 4, lun 0
SCSI device sdf: 35843670 512-byte hdwr sectors (18352 MB)
SCSI device sdf: drive cache: write through
sdf: unknown partition table
Attached scsi disk sdf at scsi0, channel 0, id 5, lun 0
SCSI device sdg: 35843670 512-byte hdwr sectors (18352 MB)
SCSI device sdg: drive cache: write through
sdg: unknown partition table
Attached scsi disk sdg at scsi0, channel 0, id 8, lun 0
SCSI device sdh: 35843670 512-byte hdwr sectors (18352 MB)
SCSI device sdh: drive cache: write through
sdh: unknown partition table
Attached scsi disk sdh at scsi0, channel 0, id 9, lun 0
SCSI device sdi: 35843670 512-byte hdwr sectors (18352 MB)
SCSI device sdi: drive cache: write through
sdi: unknown partition table
Attached scsi disk sdi at scsi0, channel 0, id 10, lun 0
about to call initcall 0xc03ab700
about to call initcall 0xc03ab7f0
input: PC Speaker
about to call initcall 0xc03ac930
oprofile: using NMI interrupt.
about to call initcall 0xc03ad230
about to call initcall 0xc03ae0e0
NET4: Linux TCP/IP 1.0 for NET4.0
IP: routing cache hash table of 262144 buckets, 4096Kbytes
TCP: Hash tables configured (established 262144 bind 43690)
about to call initcall 0xc03ae800
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
about to call initcall 0xc03ae8b0
about to call initcall 0xc03ae910
about to call initcall 0xc039d290
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 256k freed
INIT: version 2.84 booting
Activating swap.
Checking root file system...
fsck 1.32 (09-Nov-2002)
/dev/sda2: clean, 84725/513024 files, 675883/1024143 blocks
System time was Fri Mar 28 03:44:15 UTC 2003.
Setting the System Clock using the Hardware Clock as reference...
System Clock set. System local time is now Fri Mar 28 03:44:17 UTC 2003.
Checking all file systems...
fsck 1.32 (09-Nov-2002)
Setting kernel variables..
Mounting local filesystems...
nothing was mounted
Running 0dns-down to make sure resolv.conf is ok...done.
Cleaning: /etc/network/ifstate.
Setting up IP spoofing protection: rp_filter.
Configuring network interfaces... eth0: Link is down
done.
Loading the saved-state of the serial devices...
/dev/ttyS0 at 0x03f8 (irq = 4) is a 16550A
Setting up general console font...done.
cannot (un)set powersave mode
Setting the System Clock using the Hardware Clock as reference...
System Clock set. Local time: Thu Mar 27 19:44:20 PST 2003
Cleaning: /tmp eth0: Link is up, running at 100Mbit full-duplex
/var/lock /var/run.
Initializing random number generator... done.
Recovering nvi editor sessions... done.
Setting up X server socket directory /tmp/.X11-unix...done.
INIT: Entering runlevel: 2
Starting system log daemon: syslogd.
Starting kernel log daemon: klogd.
Starting internet superserver: inetd.
Starting network benchmark server: netserver.
Starting OpenBSD Secure Shell server: sshd.
Starting NTP server: ntpd.
Debian GNU/Linux testing/unstable megeira ttyS0
megeira login: root
Password:
Last login: Thu Mar 27 19:34:10 2003 on ttyS0
Linux megeira 2.5.66 #1 SMP Tue Mar 25 03:36:43 PST 2003 i686 unknown unknown GNU/Linux
megeira:~# cat /proc/meminfo
MemTotal: 65950016 kB
MemFree: 65863232 kB
Buffers: 3936 kB
Cached: 12704 kB
SwapCached: 0 kB
Active: 22944 kB
Inactive: 11808 kB
HighTotal: 65198080 kB
HighFree: 65151424 kB
LowTotal: 751936 kB
LowFree: 711808 kB
SwapTotal: 0 kB
SwapFree: 0 kB
Dirty: 992 kB
Writeback: 0 kB
Mapped: 14784 kB
Slab: 13248 kB
Committed_AS: 2408 kB
PageTables: 1568 kB
ReverseMaps: 2565
HugePages_Total: 0
HugePages_Free: 0
Hugepagesize: 2048 kB
megeira:~# [?1l>[24;1H
[?1049l[detached]
$
Script done on Thu Mar 27 19:57:28 2003
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Mon Mar 31 2003 - 22:00:31 EST