hi adam
for your oss-2.5 tree. this patch brings sound/oss/opl3sa2.c in sync with 2.4.
compiles and works (testes on my toshiba tecra 8000). against 2.5.66-bk
rgds
-daniel
===== sound/oss/opl3sa2.c 1.19 vs edited =====
--- 1.19/sound/oss/opl3sa2.c Sat Mar 22 21:43:27 2003
+++ edited/sound/oss/opl3sa2.c Sat Mar 29 18:49:37 2003
@@ -58,6 +58,10 @@
* Zwane Mwaikambo Added PM support. (Dec 4 2001)
*
* Adam Belay Converted driver to new PnP Layer (Oct 12, 2002)
+ * Zwane Mwaikambo Code, data structure cleanups. (Feb 15 2002)
+ * Zwane Mwaikambo Free resources during auxiliary device probe
+ * failures (Apr 29 2002)
+ *
*/
#include <linux/config.h>
@@ -71,6 +75,9 @@
#include "ad1848.h"
#include "mpu401.h"
+#define OPL3SA2_MODULE_NAME "opl3sa2"
+#define PFX OPL3SA2_MODULE_NAME ": "
+
/* Useful control port indexes: */
#define OPL3SA2_PM 0x01
#define OPL3SA2_SYS_CTRL 0x02
@@ -91,9 +98,11 @@
#define DEFAULT_TIMBRE 0
/* Power saving modes */
-#define OPL3SA2_PM_MODE1 0x05
-#define OPL3SA2_PM_MODE2 0x04
-#define OPL3SA2_PM_MODE3 0x03
+#define OPL3SA2_PM_MODE0 0x00
+#define OPL3SA2_PM_MODE1 0x04 /* PSV */
+#define OPL3SA2_PM_MODE2 0x05 /* PSV | PDX */
+#define OPL3SA2_PM_MODE3 0x27 /* ADOWN | PSV | PDN | PDX */
+
/* For checking against what the card returns: */
#define VERSION_UNKNOWN 0
@@ -107,6 +116,7 @@
#define CHIPSET_UNKNOWN -1
#define CHIPSET_OPL3SA2 0
#define CHIPSET_OPL3SA3 1
+static const char *CHIPSET_TABLE[] = {"OPL3-SA2", "OPL3-SA3"};
#ifdef CONFIG_PNP
#define OPL3SA2_CARDS_MAX 4
@@ -117,40 +127,41 @@
/* This should be pretty obvious */
static int opl3sa2_cards_num; /* = 0 */
-/* What's my version(s)? */
-static int chipset[OPL3SA2_CARDS_MAX] = { CHIPSET_UNKNOWN };
-
-/* Oh well, let's just cache the name(s) */
-static char chipset_name[OPL3SA2_CARDS_MAX][12];
-
-/* Where's my mixer(s)? */
-static int opl3sa2_mixer[OPL3SA2_CARDS_MAX] = { -1 };
-
-/* Bag o' mixer data */
-typedef struct opl3sa2_mixerdata_tag {
+typedef struct {
+ /* device resources */
unsigned short cfg_port;
- unsigned short padding;
- unsigned char reg;
- unsigned int in_suspend;
- struct pm_dev *pmdev;
- unsigned int card;
- unsigned int volume_l;
- unsigned int volume_r;
- unsigned int mic;
- unsigned int bass_l;
- unsigned int bass_r;
- unsigned int treble_l;
- unsigned int treble_r;
- unsigned int wide_l;
- unsigned int wide_r;
-} opl3sa2_mixerdata;
-static opl3sa2_mixerdata opl3sa2_data[OPL3SA2_CARDS_MAX];
-
-static struct address_info cfg[OPL3SA2_CARDS_MAX];
-static struct address_info cfg_mss[OPL3SA2_CARDS_MAX];
-static struct address_info cfg_mpu[OPL3SA2_CARDS_MAX];
+ struct address_info cfg;
+ struct address_info cfg_mss;
+ struct address_info cfg_mpu;
+#ifdef CONFIG_PNP
+ /* PnP Stuff */
+ struct pnp_dev* pdev;
+ int activated; /* Whether said devices have been activated */
+#endif
+#ifdef CONFIG_PM
+ unsigned int in_suspend;
+ struct pm_dev *pmdev;
+#endif
+ unsigned int card;
+ int chipset; /* What's my version(s)? */
+ char *chipset_name;
+
+ /* mixer data */
+ int mixer;
+ unsigned int volume_l;
+ unsigned int volume_r;
+ unsigned int mic;
+ unsigned int bass_l;
+ unsigned int bass_r;
+ unsigned int treble_l;
+ unsigned int treble_r;
+ unsigned int wide_l;
+ unsigned int wide_r;
+} opl3sa2_state_t;
+static opl3sa2_state_t opl3sa2_state[OPL3SA2_CARDS_MAX];
-static spinlock_t lock=SPIN_LOCK_UNLOCKED;
+static spinlock_t opl3sa2_lock = SPIN_LOCK_UNLOCKED;
+
/* Our parameters */
static int __initdata io = -1;
@@ -241,7 +252,7 @@
* All of the mixer functions...
*/
-static void opl3sa2_set_volume(opl3sa2_mixerdata* devc, int left, int right)
+static void opl3sa2_set_volume(opl3sa2_state_t* devc, int left, int right)
{
static unsigned char scale[101] = {
0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0e, 0x0e, 0x0e,
@@ -276,7 +287,7 @@
}
-static void opl3sa2_set_mic(opl3sa2_mixerdata* devc, int level)
+static void opl3sa2_set_mic(opl3sa2_state_t* devc, int level)
{
unsigned char vol = 0x1F;
@@ -291,7 +302,7 @@
}
-static void opl3sa3_set_bass(opl3sa2_mixerdata* devc, int left, int right)
+static void opl3sa3_set_bass(opl3sa2_state_t* devc, int left, int right)
{
unsigned char bass;
@@ -302,7 +313,7 @@
}
-static void opl3sa3_set_treble(opl3sa2_mixerdata* devc, int left, int right)
+static void opl3sa3_set_treble(opl3sa2_state_t* devc, int left, int right)
{
unsigned char treble;
@@ -313,7 +324,7 @@
}
-static void opl3sa3_set_wide(opl3sa2_mixerdata* devc, int left, int right)
+static void opl3sa3_set_wide(opl3sa2_state_t* devc, int left, int right)
{
unsigned char wide;
@@ -324,16 +335,16 @@
}
-static void opl3sa2_mixer_reset(opl3sa2_mixerdata* devc, int card)
+static void opl3sa2_mixer_reset(opl3sa2_state_t* devc)
{
- if(devc) {
+ if (devc) {
opl3sa2_set_volume(devc, DEFAULT_VOLUME, DEFAULT_VOLUME);
devc->volume_l = devc->volume_r = DEFAULT_VOLUME;
opl3sa2_set_mic(devc, DEFAULT_MIC);
devc->mic = DEFAULT_MIC;
- if(chipset[card] == CHIPSET_OPL3SA3) {
+ if (devc->chipset == CHIPSET_OPL3SA3) {
opl3sa3_set_bass(devc, DEFAULT_TIMBRE, DEFAULT_TIMBRE);
devc->bass_l = devc->bass_r = DEFAULT_TIMBRE;
opl3sa3_set_treble(devc, DEFAULT_TIMBRE, DEFAULT_TIMBRE);
@@ -343,13 +354,13 @@
}
-static void opl3sa2_mixer_restore(opl3sa2_mixerdata* devc, int card)
+static void opl3sa2_mixer_restore(opl3sa2_state_t* devc)
{
if (devc) {
opl3sa2_set_volume(devc, devc->volume_l, devc->volume_r);
opl3sa2_set_mic(devc, devc->mic);
- if (chipset[card] == CHIPSET_OPL3SA3) {
+ if (devc->chipset == CHIPSET_OPL3SA3) {
opl3sa3_set_bass(devc, devc->bass_l, devc->bass_r);
opl3sa3_set_treble(devc, devc->treble_l, devc->treble_r);
}
@@ -391,9 +402,9 @@
{
int cmdf = cmd & 0xff;
- opl3sa2_mixerdata* devc = (opl3sa2_mixerdata*) mixer_devs[dev]->devc;
+ opl3sa2_state_t* devc = &opl3sa2_state[dev];
- switch(cmdf) {
+ switch (cmdf) {
case SOUND_MIXER_VOLUME:
case SOUND_MIXER_MIC:
case SOUND_MIXER_DEVMASK:
@@ -407,10 +418,10 @@
return -EINVAL;
}
- if(((cmd >> 8) & 0xff) != 'M')
+ if (((cmd >> 8) & 0xff) != 'M')
return -EINVAL;
- if(_SIOC_DIR (cmd) & _SIOC_WRITE) {
+ if (_SIOC_DIR (cmd) & _SIOC_WRITE) {
switch (cmdf) {
case SOUND_MIXER_VOLUME:
arg_to_vol_stereo(*(unsigned int*)arg,
@@ -474,9 +485,9 @@
{
int cmdf = cmd & 0xff;
- opl3sa2_mixerdata* devc = (opl3sa2_mixerdata*) mixer_devs[dev]->devc;
+ opl3sa2_state_t* devc = &opl3sa2_state[dev];
- switch(cmdf) {
+ switch (cmdf) {
case SOUND_MIXER_BASS:
case SOUND_MIXER_TREBLE:
case SOUND_MIXER_DIGITAL1:
@@ -488,10 +499,10 @@
return opl3sa2_mixer_ioctl(dev, cmd, arg);
}
- if(((cmd >> 8) & 0xff) != 'M')
+ if (((cmd >> 8) & 0xff) != 'M')
return -EINVAL;
- if(_SIOC_DIR (cmd) & _SIOC_WRITE) {
+ if (_SIOC_DIR (cmd) & _SIOC_WRITE) {
switch (cmdf) {
case SOUND_MIXER_BASS:
arg_to_vol_stereo(*(unsigned int*)arg,
@@ -584,9 +595,9 @@
}
-static inline void __init attach_opl3sa2_mpu(struct address_info* hw_config)
+static inline int __init attach_opl3sa2_mpu(struct address_info* hw_config)
{
- attach_mpu401(hw_config, THIS_MODULE);
+ return attach_mpu401(hw_config, THIS_MODULE);
}
@@ -608,7 +619,7 @@
initial_mixers = num_mixers;
attach_ms_sound(hw_config, THIS_MODULE); /* Slot 0 */
- if(hw_config->slots[0] != -1) {
+ if (hw_config->slots[0] != -1) {
/* Did the MSS driver install? */
if(num_mixers == (initial_mixers + 1)) {
/* The MSS mixer is installed, reroute mixers appropiately */
@@ -617,7 +628,7 @@
AD1848_REROUTE(SOUND_MIXER_LINE3, SOUND_MIXER_LINE);
}
else {
- printk(KERN_ERR "opl3sa2: MSS mixer not installed?\n");
+ printk(KERN_ERR PFX "MSS mixer not installed?\n");
}
}
}
@@ -634,15 +645,14 @@
unsigned char misc;
unsigned char tmp;
unsigned char version;
- char tag;
/*
- * Verify that the I/O port range is free.
+ * Try and allocate our I/O port range.
*/
- if(check_region(hw_config->io_base, 2)) {
- printk(KERN_ERR "opl3sa2: Control I/O port %#x not free\n",
+ if (!request_region(hw_config->io_base, 2, OPL3SA2_MODULE_NAME)) {
+ printk(KERN_ERR PFX "Control I/O port %#x not free\n",
hw_config->io_base);
- return 0;
+ goto out_nodev;
}
/*
@@ -653,9 +663,9 @@
opl3sa2_write(hw_config->io_base, OPL3SA2_MISC, misc ^ 0x07);
opl3sa2_read(hw_config->io_base, OPL3SA2_MISC, &tmp);
if(tmp != misc) {
- printk(KERN_ERR "opl3sa2: Control I/O port %#x is not a YMF7xx chipset!\n",
+ printk(KERN_ERR PFX "Control I/O port %#x is not a YMF7xx chipset!\n",
hw_config->io_base);
- return 0;
+ goto out_region;
}
/*
@@ -666,9 +676,9 @@
opl3sa2_read(hw_config->io_base, OPL3SA2_MIC, &tmp);
if((tmp & 0x9f) != 0x8a) {
printk(KERN_ERR
- "opl3sa2: Control I/O port %#x is not a YMF7xx chipset!\n",
+ PFX "Control I/O port %#x is not a YMF7xx chipset!\n",
hw_config->io_base);
- return 0;
+ goto out_region;
}
opl3sa2_write(hw_config->io_base, OPL3SA2_MIC, tmp);
@@ -679,57 +689,54 @@
* of the miscellaneous register.
*/
version = misc & 0x07;
- printk(KERN_DEBUG "opl3sa2: chipset version = %#x\n", version);
- switch(version) {
+ printk(KERN_DEBUG PFX "Chipset version = %#x\n", version);
+ switch (version) {
case 0:
- chipset[card] = CHIPSET_UNKNOWN;
- tag = '?'; /* silence compiler warning */
+ opl3sa2_state[card].chipset = CHIPSET_UNKNOWN;
printk(KERN_ERR
- "opl3sa2: Unknown Yamaha audio controller version\n");
+ PFX "Unknown Yamaha audio controller version\n");
break;
case VERSION_YMF711:
- chipset[card] = CHIPSET_OPL3SA2;
- tag = '2';
- printk(KERN_INFO "opl3sa2: Found OPL3-SA2 (YMF711)\n");
+ opl3sa2_state[card].chipset = CHIPSET_OPL3SA2;
+ printk(KERN_INFO PFX "Found OPL3-SA2 (YMF711)\n");
break;
case VERSION_YMF715:
- chipset[card] = CHIPSET_OPL3SA3;
- tag = '3';
+ opl3sa2_state[card].chipset = CHIPSET_OPL3SA3;
printk(KERN_INFO
- "opl3sa2: Found OPL3-SA3 (YMF715 or YMF719)\n");
+ PFX "Found OPL3-SA3 (YMF715 or YMF719)\n");
break;
case VERSION_YMF715B:
- chipset[card] = CHIPSET_OPL3SA3;
- tag = '3';
+ opl3sa2_state[card].chipset = CHIPSET_OPL3SA3;
printk(KERN_INFO
- "opl3sa2: Found OPL3-SA3 (YMF715B or YMF719B)\n");
+ PFX "Found OPL3-SA3 (YMF715B or YMF719B)\n");
break;
case VERSION_YMF715E:
default:
- chipset[card] = CHIPSET_OPL3SA3;
- tag = '3';
+ opl3sa2_state[card].chipset = CHIPSET_OPL3SA3;
printk(KERN_INFO
- "opl3sa2: Found OPL3-SA3 (YMF715E or YMF719E)\n");
+ PFX "Found OPL3-SA3 (YMF715E or YMF719E)\n");
break;
}
- if(chipset[card] != CHIPSET_UNKNOWN) {
+ if (opl3sa2_state[card].chipset != CHIPSET_UNKNOWN) {
/* Generate a pretty name */
- sprintf(chipset_name[card], "OPL3-SA%c", tag);
- return 1;
+ opl3sa2_state[card].chipset_name = (char *)CHIPSET_TABLE[opl3sa2_state[card].chipset];
+ return 0;
}
- return 0;
+
+out_region:
+ release_region(hw_config->io_base, 2);
+out_nodev:
+ return -ENODEV;
}
static void __init attach_opl3sa2(struct address_info* hw_config, int card)
{
- request_region(hw_config->io_base, 2, chipset_name[card]);
-
/* Initialize IRQ configuration to IRQ-B: -, IRQ-A: WSS+MPU+OPL3 */
opl3sa2_write(hw_config->io_base, OPL3SA2_IRQ_CONFIG, 0x0d);
@@ -748,30 +755,29 @@
static void __init attach_opl3sa2_mixer(struct address_info *hw_config, int card)
{
struct mixer_operations* mixer_operations;
- opl3sa2_mixerdata* devc;
+ opl3sa2_state_t* devc = &opl3sa2_state[card];
/* Install master mixer */
- if(chipset[card] == CHIPSET_OPL3SA3) {
+ if (devc->chipset == CHIPSET_OPL3SA3) {
mixer_operations = &opl3sa3_mixer_operations;
}
else {
mixer_operations = &opl3sa2_mixer_operations;
}
- if((devc = &opl3sa2_data[card])) {
- devc->cfg_port = hw_config->io_base;
+ devc->cfg_port = hw_config->io_base;
+ devc->mixer = sound_install_mixer(MIXER_DRIVER_VERSION,
+ mixer_operations->name,
+ mixer_operations,
+ sizeof(struct mixer_operations),
+ devc);
+ if(devc->mixer < 0) {
+ printk(KERN_ERR PFX "Could not install %s master mixer\n",
+ mixer_operations->name);
+ }
+ else {
+ opl3sa2_mixer_reset(devc);
- opl3sa2_mixer[card] = sound_install_mixer(MIXER_DRIVER_VERSION,
- mixer_operations->name,
- mixer_operations,
- sizeof(struct mixer_operations),
- devc);
- if(opl3sa2_mixer[card] < 0) {
- printk(KERN_ERR "opl3sa2: Could not install %s master mixer\n",
- mixer_operations->name);
- }
- else
- opl3sa2_mixer_reset(devc, card);
}
}
@@ -805,7 +811,7 @@
opl3sa2_write(hw_config->io_base, OPL3SA2_SYS_CTRL, sys_ctrl);
}
else {
- printk(KERN_ERR "opl3sa2: not setting ymode, it must be one of 0,1,2,3\n");
+ printk(KERN_ERR PFX "not setting ymode, it must be one of 0,1,2,3\n");
}
}
@@ -820,7 +826,7 @@
opl3sa2_write(hw_config->io_base, OPL3SA2_MISC, misc);
}
else {
- printk(KERN_ERR "opl3sa2: not setting loopback, it must be either 0 or 1\n");
+ printk(KERN_ERR PFX "not setting loopback, it must be either 0 or 1\n");
}
}
@@ -831,8 +837,9 @@
release_region(hw_config->io_base, 2);
/* Unload mixer */
- if(opl3sa2_mixer[card] >= 0)
- sound_unload_mixerdev(opl3sa2_mixer[card]);
+ if(opl3sa2_state[card].mixer >= 0)
+ sound_unload_mixerdev(opl3sa2_state[card].mixer);
+
}
#ifdef CONFIG_PNP
@@ -846,35 +853,40 @@
static int opl3sa2_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
{
int card = opl3sa2_cards_num;
+
+ /* we don't actually want to return an error as the user may have specified
+ * no multiple card search
+ */
+
if (opl3sa2_cards_num == OPL3SA2_CARDS_MAX)
return 0;
opl3sa2_activated[card] = 1;
/* Our own config: */
- cfg[card].io_base = pnp_port_start(dev, 4);
- cfg[card].irq = pnp_irq(dev, 0);
- cfg[card].dma = pnp_dma(dev, 0);
- cfg[card].dma2 = pnp_dma(dev, 1);
+ opl3sa2_state[card].cfg.io_base = pnp_port_start(dev, 4);
+ opl3sa2_state[card].cfg.irq = pnp_irq(dev, 0);
+ opl3sa2_state[card].cfg.dma = pnp_dma(dev, 0);
+ opl3sa2_state[card].cfg.dma2 = pnp_dma(dev, 1);
/* The MSS config: */
- cfg_mss[card].io_base = pnp_port_start(dev, 1);
- cfg_mss[card].irq = pnp_irq(dev, 0);
- cfg_mss[card].dma = pnp_dma(dev, 0);
- cfg_mss[card].dma2 = pnp_dma(dev, 1);
- cfg_mss[card].card_subtype = 1; /* No IRQ or DMA setup */
-
- cfg_mpu[card].io_base = pnp_port_start(dev, 3);
- cfg_mpu[card].irq = pnp_irq(dev, 0);
- cfg_mpu[card].dma = -1;
- cfg_mpu[card].dma2 = -1;
- cfg_mpu[card].always_detect = 1; /* It's there, so use shared IRQs */
+ opl3sa2_state[card].cfg_mss.io_base = pnp_port_start(dev, 1);
+ opl3sa2_state[card].cfg_mss.irq = pnp_irq(dev, 0);
+ opl3sa2_state[card].cfg_mss.dma = pnp_dma(dev, 0);
+ opl3sa2_state[card].cfg_mss.dma2 = pnp_dma(dev, 1);
+ opl3sa2_state[card].cfg_mss.card_subtype = 1; /* No IRQ or DMA setup */
+
+ opl3sa2_state[card].cfg_mpu.io_base = pnp_port_start(dev, 3);
+ opl3sa2_state[card].cfg_mpu.irq = pnp_irq(dev, 0);
+ opl3sa2_state[card].cfg_mpu.dma = -1;
+ opl3sa2_state[card].cfg_mpu.dma2 = -1;
+ opl3sa2_state[card].cfg_mpu.always_detect = 1; /* It's there, so use shared IRQs */
/* Call me paranoid: */
- opl3sa2_clear_slots(&cfg[card]);
- opl3sa2_clear_slots(&cfg_mss[card]);
- opl3sa2_clear_slots(&cfg_mpu[card]);
+ opl3sa2_clear_slots(&opl3sa2_state[card].cfg);
+ opl3sa2_clear_slots(&opl3sa2_state[card].cfg_mss);
+ opl3sa2_clear_slots(&opl3sa2_state[card].cfg_mpu);
- opl3sa2_dev[card] = dev;
+ opl3sa2_state[card].pdev = dev;
opl3sa2_cards_num++;
return 0;
@@ -890,19 +902,19 @@
/* End of component functions */
+#ifdef CONFIG_PM
/* Power Management support functions */
-static int opl3sa2_suspend(struct pm_dev *pdev, unsigned char pm_mode)
+static int opl3sa2_suspend(struct pm_dev *pdev, unsigned int pm_mode)
{
unsigned long flags;
- opl3sa2_mixerdata *p;
+ opl3sa2_state_t *p;
if (!pdev)
return -EINVAL;
- spin_lock_irqsave(&lock,flags);
+ spin_lock_irqsave(&opl3sa2_lock,flags);
- p = (opl3sa2_mixerdata *) pdev->data;
- p->in_suspend = 1;
+ p = (opl3sa2_state_t *) pdev->data;
switch (pm_mode) {
case 1:
pm_mode = OPL3SA2_PM_MODE1;
@@ -914,37 +926,42 @@
pm_mode = OPL3SA2_PM_MODE3;
break;
default:
- pm_mode = OPL3SA2_PM_MODE3;
- break;
+ /* we don't know howto handle this... */
+ spin_unlock_irqrestore(&opl3sa2_lock, flags);
+ return -EBUSY;
}
+ p->in_suspend = 1;
+
/* its supposed to automute before suspending, so we won't bother */
- opl3sa2_read(p->cfg_port, OPL3SA2_PM, &p->reg);
- opl3sa2_write(p->cfg_port, OPL3SA2_PM, p->reg | pm_mode);
+ opl3sa2_write(p->cfg_port, OPL3SA2_PM, pm_mode);
+ /* wait a while for the clock oscillator to stabilise */
+ mdelay(10);
- spin_unlock_irqrestore(&lock,flags);
+ spin_unlock_irqrestore(&opl3sa2_lock,flags);
return 0;
}
static int opl3sa2_resume(struct pm_dev *pdev)
{
unsigned long flags;
- opl3sa2_mixerdata *p;
+ opl3sa2_state_t *p;
- if (!pdev)
- return -EINVAL;
+ if (!pdev)
+ return -EINVAL;
- p = (opl3sa2_mixerdata *) pdev->data;
- spin_lock_irqsave(&lock,flags);
+ p = (opl3sa2_state_t *) pdev->data;
+ spin_lock_irqsave(&opl3sa2_lock,flags);
- /* I don't think this is necessary */
- opl3sa2_write(p->cfg_port, OPL3SA2_PM, p->reg);
- opl3sa2_mixer_restore(p, p->card);
- p->in_suspend = 0;
+ /* I don't think this is necessary */
+ opl3sa2_write(p->cfg_port, OPL3SA2_PM, OPL3SA2_PM_MODE0);
+ opl3sa2_mixer_restore(p);
+ p->in_suspend = 0;
- spin_unlock_irqrestore(&lock,flags);
+ spin_unlock_irqrestore(&opl3sa2_lock,flags);
return 0;
}
+#endif /* CONFIG_PM */
static int opl3sa2_pm_callback(struct pm_dev *pdev, pm_request_t rqst, void *data)
{
@@ -967,8 +984,7 @@
*/
static int __init init_opl3sa2(void)
{
- int card;
- int max;
+ int card, max;
/* Sanitize isapnp and multiple settings */
isapnp = isapnp != 0 ? 1 : 0;
@@ -980,64 +996,69 @@
if (isapnp){
pnp_register_driver(&opl3sa2_driver);
if(!opl3sa2_cards_num){
- printk(KERN_INFO "opl3sa2: No PnP cards found\n");
+ printk(KERN_INFO PFX "No PnP cards found\n");
isapnp = 0;
}
max = opl3sa2_cards_num;
}
#endif
- for(card = 0; card < max; card++) {
+ for (card = 0; card < max; card++) {
/* If a user wants an I/O then assume they meant it */
- if(!isapnp) {
- if(io == -1 || irq == -1 || dma == -1 ||
- dma2 == -1 || mss_io == -1) {
+ if (!isapnp) {
+ if (io == -1 || irq == -1 || dma == -1 ||
+ dma2 == -1 || mss_io == -1) {
printk(KERN_ERR
- "opl3sa2: io, mss_io, irq, dma, and dma2 must be set\n");
+ PFX "io, mss_io, irq, dma, and dma2 must be set\n");
return -EINVAL;
- opl3sa2_cards_num++;
}
+ opl3sa2_cards_num++;
/*
* Our own config:
* (NOTE: IRQ and DMA aren't used, so they're set to
* give pretty output from conf_printf. :)
*/
- cfg[card].io_base = io;
- cfg[card].irq = irq;
- cfg[card].dma = dma;
- cfg[card].dma2 = dma2;
+ opl3sa2_state[card].cfg.io_base = io;
+ opl3sa2_state[card].cfg.irq = irq;
+ opl3sa2_state[card].cfg.dma = dma;
+ opl3sa2_state[card].cfg.dma2 = dma2;
/* The MSS config: */
- cfg_mss[card].io_base = mss_io;
- cfg_mss[card].irq = irq;
- cfg_mss[card].dma = dma;
- cfg_mss[card].dma2 = dma2;
- cfg_mss[card].card_subtype = 1; /* No IRQ or DMA setup */
-
- cfg_mpu[card].io_base = mpu_io;
- cfg_mpu[card].irq = irq;
- cfg_mpu[card].dma = -1;
- cfg_mpu[card].always_detect = 1; /* Use shared IRQs */
+ opl3sa2_state[card].cfg_mss.io_base = mss_io;
+ opl3sa2_state[card].cfg_mss.irq = irq;
+ opl3sa2_state[card].cfg_mss.dma = dma;
+ opl3sa2_state[card].cfg_mss.dma2 = dma2;
+ opl3sa2_state[card].cfg_mss.card_subtype = 1; /* No IRQ or DMA setup */
+
+ opl3sa2_state[card].cfg_mpu.io_base = mpu_io;
+ opl3sa2_state[card].cfg_mpu.irq = irq;
+ opl3sa2_state[card].cfg_mpu.dma = -1;
+ opl3sa2_state[card].cfg_mpu.always_detect = 1; /* Use shared IRQs */
/* Call me paranoid: */
- opl3sa2_clear_slots(&cfg[card]);
- opl3sa2_clear_slots(&cfg_mss[card]);
- opl3sa2_clear_slots(&cfg_mpu[card]);
+ opl3sa2_clear_slots(&opl3sa2_state[card].cfg);
+ opl3sa2_clear_slots(&opl3sa2_state[card].cfg_mss);
+ opl3sa2_clear_slots(&opl3sa2_state[card].cfg_mpu);
}
- if(!probe_opl3sa2(&cfg[card], card) ||
- !probe_opl3sa2_mss(&cfg_mss[card])) {
+ if (probe_opl3sa2(&opl3sa2_state[card].cfg, card))
+ return -ENODEV;
+
+
+ if (!probe_opl3sa2_mss(&opl3sa2_state[card].cfg_mss)) {
/*
* If one or more cards are already registered, don't
* return an error but print a warning. Note, this
* should never really happen unless the hardware or
* ISA PnP screwed up.
*/
- if(opl3sa2_cards_num) {
+ release_region(opl3sa2_state[card].cfg.io_base, 2);
+
+ if (opl3sa2_cards_num) {
printk(KERN_WARNING
- "opl3sa2: There was a problem probing one "
+ PFX "There was a problem probing one "
" of the ISA PNP cards, continuing\n");
opl3sa2_cards_num--;
continue;
@@ -1045,47 +1066,53 @@
return -ENODEV;
}
- attach_opl3sa2(&cfg[card], card);
- conf_printf(chipset_name[card], &cfg[card]);
- attach_opl3sa2_mss(&cfg_mss[card]);
- attach_opl3sa2_mixer(&cfg[card], card);
-
- opl3sa2_data[card].card = card;
+ attach_opl3sa2(&opl3sa2_state[card].cfg, card);
+ conf_printf(opl3sa2_state[card].chipset_name, &opl3sa2_state[card].cfg);
+ attach_opl3sa2_mixer(&opl3sa2_state[card].cfg, card);
+ attach_opl3sa2_mss(&opl3sa2_state[card].cfg_mss);
+
+ /* ewww =) */
+ opl3sa2_state[card].card = card;
+#ifdef CONFIG_PM
/* register our power management capabilities */
- opl3sa2_data[card].pmdev = pm_register(PM_ISA_DEV, card, opl3sa2_pm_callback);
- if (opl3sa2_data[card].pmdev)
- opl3sa2_data[card].pmdev->data = &opl3sa2_data[card];
+ opl3sa2_state[card].pmdev = pm_register(PM_ISA_DEV, card, opl3sa2_pm_callback);
+ if (opl3sa2_state[card].pmdev)
+ opl3sa2_state[card].pmdev->data = &opl3sa2_state[card];
+#endif /* CONFIG_PM */
/*
* Set the Yamaha 3D enhancement mode (aka Ymersion) if asked to and
* it's supported.
*/
- if(ymode != -1) {
- if(chipset[card] == CHIPSET_OPL3SA2) {
+ if (ymode != -1) {
+ if (opl3sa2_state[card].chipset == CHIPSET_OPL3SA2) {
printk(KERN_ERR
- "opl3sa2: ymode not supported on OPL3-SA2\n");
+ PFX "ymode not supported on OPL3-SA2\n");
}
else {
- opl3sa2_set_ymode(&cfg[card], ymode);
+ opl3sa2_set_ymode(&opl3sa2_state[card].cfg, ymode);
}
}
/* Set A/D input to Mono loopback if asked to. */
- if(loopback != -1) {
- opl3sa2_set_loopback(&cfg[card], loopback);
+ if (loopback != -1) {
+ opl3sa2_set_loopback(&opl3sa2_state[card].cfg, loopback);
}
- /* Attach MPU if we've been asked to do so */
- if(cfg_mpu[card].io_base != -1) {
- if(probe_opl3sa2_mpu(&cfg_mpu[card])) {
- attach_opl3sa2_mpu(&cfg_mpu[card]);
+ /* Attach MPU if we've been asked to do so, failure isn't fatal */
+ if (opl3sa2_state[card].cfg_mpu.io_base != -1) {
+ if (probe_opl3sa2_mpu(&opl3sa2_state[card].cfg_mpu)) {
+ if (attach_opl3sa2_mpu(&opl3sa2_state[card].cfg_mpu)) {
+ printk(KERN_ERR PFX "failed to attach MPU401\n");
+ opl3sa2_state[card].cfg_mpu.slots[1] = -1;
+ }
}
}
}
- if(isapnp) {
- printk(KERN_NOTICE "opl3sa2: %d PnP card(s) found.\n", opl3sa2_cards_num);
+ if (isapnp) {
+ printk(KERN_NOTICE PFX "%d PnP card(s) found.\n", opl3sa2_cards_num);
}
return 0;
@@ -1100,15 +1127,14 @@
int card;
for(card = 0; card < opl3sa2_cards_num; card++) {
- if (opl3sa2_data[card].pmdev)
- pm_unregister(opl3sa2_data[card].pmdev);
-
- if(cfg_mpu[card].slots[1] != -1) {
- unload_opl3sa2_mpu(&cfg_mpu[card]);
- }
- unload_opl3sa2_mss(&cfg_mss[card]);
- unload_opl3sa2(&cfg[card], card);
+ if (opl3sa2_state[card].pmdev)
+ pm_unregister(opl3sa2_state[card].pmdev);
+ if(opl3sa2_state[card].cfg_mpu.slots[1] != -1) {
+ unload_opl3sa2_mpu(&opl3sa2_state[card].cfg_mpu);
+ }
+ unload_opl3sa2_mss(&opl3sa2_state[card].cfg_mss);
+ unload_opl3sa2(&opl3sa2_state[card].cfg, card);
#ifdef CONFIG_PNP
pnp_unregister_driver(&opl3sa2_driver);
#endif
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Mon Mar 31 2003 - 22:00:34 EST