WHAT
This is a kernel-mode API, and an initial set of drivers for it, that
helps Linux 2.4 and 2.5 kernels support intelligent "USB Device"
(peripheral) hardware.
The code is ready for more general use by the Linux community, including
development of new drivers. It supports network connections over USB
"out of the box", using the NetChip 2280 USB 2.0 high speed controller,
and is now being used with high speed USB devices running under Linux.
(Note that such an API is on the 2.5 wishlist. This is the first such
API that was designed from the ground up to work with the existing
host side Linux-USB stack, and to support USB 2.0 high speed devices.)
WHERE
http://kernel.bkbits.net/~david-b/
Temporary web page with info, including:
- gadget.pdf ... kerneldoc, in PDF format
- gadget25-0331.patch ... patch for 2.5
- gadget24-0331.patch ... patch for 2.4
bk://kernel.bkbits.net/david-b/gadget-2.5
bk://kernel.bkbits.net/david-b/gadget-2.4
BitKeeper repositories
HELPING
There are lots of opportunities to write drivers here, both for
dozens more USB "class" specifications and, if you want to get
down'n'dirty, for USB device controller hardware.
Please discuss this on the linux-usb-devel@lists.sourceforge.net
mailing list, unless/until a new list gets set up.
DETAILS
Since talking about a "USB Device Driver" becomes ambiguous when
both sides of the protocol stack can run Linux, Linux-USB developers
have chosen new terminology. A "USB Device Driver" is what current
Linux kernels have: a Host-side driver. A Device-side driver is
instead called a "USB Gadget Driver" ... that's why the new name.
The API is straightforward and thin, just one new header file to shape
how "gadget" drivers talk to the underlying controller hardware. There
is no "mid-layer" requirement, and all policy for device configuration
and management goes above this API. I/O involves just submitting an
asynchronous request to the relevant endpoint (like URBs but simpler).
There are currently two USB device controller drivers available
implementing that API.
- The "net2280" driver supports the NetChip 2280 controller, which
is a PCI device that supports USB 2.0 high speed transfers.
(PCI card versions are available for development.)
- There's a "dummy_hcd" which provides partial emulation (bulk
and control transfers) of a controller so that you can do some
stages of development without real hardware. (Maybe with
debug assistance from UML.) 2.5 only for now (got patch?).
This can emulate three kinds of hardware that are of interest
to the Linux community: the net2280 (as above), the sa1100
(found in older PDAs), and the pxa25x (found in newer PDAs).
There are currently two gadget drivers using that API:
- "Gadget Zero" helps development and testing. One configuration
sinks or sources data; the other one loops data sent out from
the host back in to that host. Almost any USB controller can
support this driver. You can start a new driver from this one
by "clone and modify" (using new vendor and product IDs).
- There's a CDC Ethernet gadget driver, letting you use USB as a
network link. It talks to the standard Linux "CDCEther" (2.4)
or "cdc-ether" (2.5) drivers, or corresponding class drivers
that are found on other operating systems. (It's analagous to
the ARM Linux sa1100 "usb-eth" driver; but more standard.)
You'll want some recent patches to those drivers, or the latest
2.5 "usbnet" for performance. (18+ Mbyte/sec at high speed,
using TTCP in one direction, vs 4+ MByte/sec; no tuning yet.)
Both of those gadget drivers have compile-time configuration support
to let them work with net2280, pxa25x, or sa1100 usb drivers. Each
controller has slightly different endpoint capabilities; gadget drivers
must choose endpoints and configurations accordingly, and there's no
point in trying to do that at run time.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Mon Mar 31 2003 - 22:00:37 EST