On Sun, 6 Apr 2003, Chuck Ebbert wrote:
>
>
>
> > Is there anything i can do to tune the drives connected to he 3ware
> > controller ? (37MB/sec vs 43MB/sec) (and why is the seq. output block
> > 65MB/sec on the 3ware vs 41MB/sec on 'ide controllers')
>
>
> Try doing a real test with a 1 GB file on an empty filesystem:
>
>
> # mount /fs && date
> # time dd if=/dev/zero of=/fs/file1 bs=128k count=8k
that should be:
time 'dd if=/dev/zero of=/fs/file1 bs=128k count=8k && sync'
otherwise you're not measuring the time it takes to get all the data to
disk.
or use lmdd from lmbench, and its built in syncing options.
> # umount /fs && date && mount /fs
or i suppose if you're not looking at the output of "time" and rather hand
subtracting the two dates?
-dean
> # time dd if=/fs/file1 of=/dev/null bs=128k
>
>
> I get numbers that disagree with hdparm by a large amount.
>
> --
> Chuck
> I am not a number!
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Mon Apr 07 2003 - 22:00:28 EST