Hi,
In the latest -bk tree, using the vesa fb driver, I get a window that is
much too big for my screen. I'm using "vga=0x0305" as a command line
option, which I've been using for years on this box, and when the fb
code kicks in, it creates a screen that has more lines than are
displayed on the monitor (text lines that is). I can see 48 lines, but
it's acting like there are more that that present.
Is this just an operator error, in that I need to provide a different
command line option now for the size of the console screen?
Here's the relevant portions of the boot messages:
vesafb: framebuffer at 0xd5000000, mapped to 0xf080d000, size 4096k
vesafb: mode is 1024x768x8, linelength=1024, pages=4
vesafb: protected mode interface info at c000:0310
vesafb: scrolling: redraw
========================================
Display Information (EDID)
========================================
EDID Version 1.3
Manufacturer: VSC Model: 8f00 Serial#: 16843009
Year: 2001 Week 20
Display Characteristics:
Analog Display Input: Input Voltage - 0.700V/0.300V
Configurable signal level
Sync: Separate Composite Serration on
Max H-size in cm: 37
Max V-size in cm: 27
Gamma: 2.86
DPMS: Active yes, Suspend yes, Standby yes
RGB Color Display
Chromaticity: RedX: 0.638 RedY: 0.325
GreenX: 0.276 GreenY: 0.596
BlueX: 0.143 BlueY: 0.066
WhiteX: 0.283 WhiteY: 0.297
First DETAILED Timing is preferred
Display is GTF capable
Standard Timings
1280x1024@85Hz
1280x1024@60Hz
1152x864@75Hz
1024x768@85Hz
800x600@85Hz
640x480@85Hz
1600x1200@60Hz
1600x1200@75Hz
Supported VESA Modes
720x400@70Hz
720x400@88Hz
640x480@60Hz
640x480@67Hz
640x480@72Hz
640x480@75Hz
800x600@56Hz
800x600@60Hz
800x600@72Hz
800x600@75Hz
832x624@75Hz
1024x768@87Hz (interlaced)
1024x768@60Hz
1024x768@70Hz
1024x768@75Hz
1280x1024@75Hz
1152x870@75Hz
Manufacturer's mask: 0
Detailed Monitor Information
157 MHz 1280 1344 1504 1728 1024 1025 1028 1072 +HSync +VSync
Serial No : 320012039515
HorizSync : 30-95 KHz
VertRefresh : 50-180 Hz
Max Pixelclock: 200 MHz
Monitor Name : A90-2
========================================
fb0: VESA VGA frame buffer device
Console: switching to colour frame buffer device 160x64
thanks,
greg k-h
p.s. nice boot messages, I know now that the usb code will stop taking
the heat for abusing the kernel log :)
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Wed Apr 23 2003 - 22:00:20 EST